TYPE "L" COIL
TYPE "L" COIL
SEE PAGE
SEE PAGE
10-001.2
10-001.2
1
2
7,0
7,0
PRESSURE DROP ( P)
PRESSURE DROP ( P)
100
100
G.P.M.(135 SUS)
G.P.M.(135 SUS)
2 to 1 De-Energized
2 to 1 De-Energized
PSI
PSI
0
4
50
50
8
12
12
BAR
BAR
16
16
3,5
3,5
L/M (28,5 cSt)
L/M (28,5 cSt)
150
150
200
200
15,1
15,1
[32,5]
[32,5]
1.28"
1.28"
30,3
30,3
45,4
45,4
10,5
10,5
14,0
14,0
60,6
60,6
[45,2]
[45,2]
3.85"
3.85"
[97,8]
[97,8]
MANUAL OVERRIDE
MANUAL OVERRIDE
1.78"
1.78"
[50,8]
[50,8]
2.00"
2.00"
[50,8]
[50,8]
2.00"
2.00"
1.06" [27.0] HEX
1.06" [27.0] HEX
1
2
NOTES:
NOTES:
1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.1
1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.1
2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.
2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.
3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.
3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.
4. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.0
4. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.0
L
T
B
G
W
D
M
TERMINALS
TERMINALS
=18GA. 24" LEADS
=18GA. 24" LEADS
=SPADE TERM.
=SPADE TERM.
=BOLT TERM.
=BOLT TERM.
=DIN43650
=DIN43650
=WEATHER-PACK
=WEATHER-PACK
=DEUTSCH-DT04-2P
=DEUTSCH-DT04-2P
=METRI-PACK CONN.
=METRI-PACK CONN.
12D
12D
24D
24D
36D
36D
48D
48D
110D
110D
115A
115A
230A
230A
VOLTAGE
VOLTAGE
= 12 VDC
= 12 VDC
= 24 VDC
= 24 VDC
= 36 VDC
= 36 VDC
= 48 VDC
= 48 VDC
= 110 VDC
= 110 VDC
= 115 VAC
= 115 VAC
= 230 VAC
= 230 VAC
AMPS
AMPS
3.00
3.00
1.50
1.50
1.00
1.00
0.75
0.75
0.33
0.33
0.32
0.32
0.16
0.16
= BUNA "N"
= BUNA "N"
= VITON
= VITON
SEALS
SEALS
N
V
SIZE
SIZE
10 = 7/8"-14UNF
10 = 7/8"-14UNF
BASIC
BASIC
TYPE
TYPE
O2=NORMALLY OPEN POPPET
O2=NORMALLY OPEN POPPET
2-WAY, 2-POSITION
2-WAY, 2-POSITION
= CARTRIDGE ONLY
= CARTRIDGE ONLY
= SAE - #6
= SAE - #6
= SAE - #8
= SAE - #8
"A" = ALUM. HOUSING
"A" = ALUM. HOUSING
"S" = STEEL HOUSING
"S" = STEEL HOUSING
PORTS
PORTS
0
06TX
06TX
08TX
08TX
02BX
02BX
03BX
03BX
= G 1/4" BSPP
= G 1/4" BSPP
= G 3/8" BSPP
= G 3/8" BSPP
EMDV-10-X-O2-X-XXX X
EMDV-10-X-O2-X-XXX X
SOLENOID VALVE, NORMALLY OPEN.
SOLENOID VALVE, NORMALLY OPEN.
PILOT OPERATED, POPPET TYPE (2/2)
PILOT OPERATED, POPPET TYPE (2/2)
Steel = 55/60 Ft-Lb. [74/81 Nm]
Steel = 55/60 Ft-Lb. [74/81 Nm]
TORQUE:
TORQUE:
Aluminum = 35/40 Ft-Lb. [47/54 Nm]
Aluminum = 35/40 Ft-Lb. [47/54 Nm]
Reference: 520-P-100620-EN-00/09.2015
EMDV-10-O2
FEATURES AND BENEFITS
FEATURES AND BENEFITS
OPERATIONS
OPERATIONS
DESCRIPTION
DESCRIPTION
Very efficient, wet-armature solenoid core tube construction.
Very efficient, wet-armature solenoid core tube construction.
Industry common cavity.
Industry common cavity.
All cartridge valves are 100% functionally tested.
All cartridge valves are 100% functionally tested.
All external carbon steel parts are plated for longer life against the elements.
All external carbon steel parts are plated for longer life against the elements.
Hardened precision fitted poppet & sleeve provides reliable, long life.
Hardened precision fitted poppet & sleeve provides reliable, long life.
Interchangeable solenoid coils & terminations options available.
Interchangeable solenoid coils & terminations options available.
Continuous-duty, very low heat rise & waterproof solenoid coil.
Continuous-duty, very low heat rise & waterproof solenoid coil.
of the valve with a screw driver or a similar plunger smaller
of the valve with a screw driver or a similar plunger smaller
Manual Operator Standard: Push in and hold a small plunger on top
Manual Operator Standard: Push in and hold a small plunger on top
flow between ports 1 and 2 is at high pressure drop.
flow between ports 1 and 2 is at high pressure drop.
is shifted and allows no flow from ports 2 to 1 and reverse
is shifted and allows no flow from ports 2 to 1 and reverse
When solenoid coil is energized, the poppet in this valve
When solenoid coil is energized, the poppet in this valve
flow from ports 2 to 1 and restricted flow from ports 1 to 2.
flow from ports 2 to 1 and restricted flow from ports 1 to 2.
When solenoid coil is de-energized, this valve allows
When solenoid coil is de-energized, this valve allows
type, pilot operated, screw in type, solenoid operated, directional
type, pilot operated, screw in type, solenoid operated, directional
This unit is a NORMALLY OPEN, TWO POSITION, cartridge type, poppet
This unit is a NORMALLY OPEN, TWO POSITION, cartridge type, poppet
then .188" dia.
then .188" dia.
control valve.
control valve.
SOLENOID VALVE, NORMALLY OPEN,
SOLENOID VALVE, NORMALLY OPEN,
PILOT OPERATED, POPPET TYPE (2/2)
PILOT OPERATED, POPPET TYPE (2/2)
Reference: 520-P-100620-EN-00/09.2015
EMDV-10-O2
SPECIFICATIONS
SPECIFICATIONS
VALVE CAVITY: #C1020, See Page 0-012.0.
VALVE CAVITY: #C1020, See Page 0-012.0.
WEIGHT: 1.90 lb [0,86 kg] cartridge with coil only.
WEIGHT: 1.90 lb [0,86 kg] cartridge with coil only.
INSTALLATION: No restrictions.
INSTALLATION: No restrictions.
SKV-1021 Viton
SKV-1021 Viton
SEAL KIT: SKN-1021 Buna "N"
SEAL KIT: SKN-1021 Buna "N"
* Drop-Out: 50 ms
* Drop-Out: 50 ms
* Pull-in: 50 ms
* Pull-in: 50 ms
voltage supplied @ 80% of nominal flow rating.
voltage supplied @ 80% of nominal flow rating.
RESPONSE TIME: First indication of change in pressure with 100%
RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 drops/min [,25 cc/m] energized @5000 PSI[350 Bar]
INTERNAL LEAKAGE: 5 drops/min [,25 cc/m] energized @5000 PSI[350 Bar]
FLOW: 16.0 GPM [60 l/m] See performance chart.
FLOW: 16.0 GPM [60 l/m] See performance chart.
PROOF PRESSURE: 10,000 PSI [700 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
OPERATING PRESSURE: 5,000 PSI [350 Bar]
OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY OPEN,
SOLENOID VALVE, NORMALLY OPEN,
PILOT OPERATED, POPPET TYPE (2/2)
PILOT OPERATED, POPPET TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc.
MIL-H-5606, SAE-#10, SAE-#20, etc.
OPERATING MEDIA: All general purpose hydraulic fluids such as
OPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated.
5000 PSI [350 Bar] = Steel - Unplated.
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]
Please consult factory for continuously energized or
Please consult factory for continuously energized or
high ambient temperature application (>122° F [50°C])
high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100620-EN-00/09.2015
EMDV-10-O2