1/6
Type series: W1C_B… (installation deep)
Reference: 400-P-110112-EN-01/03.2023
- Slip-in cartridge valve
- For cavity AB
- All external parts with zinc-nickel plating according to
DIN EN ISO 19598
- Guided valve spool and poppet
- With bidirectional seat-valve shut-o
- With or without manual override
- As an option, hand lever can be tted to solenoid
- De-energized closed
- The slip-on coil can be rotated, and it can be replaced
without opening the hydraulic envelope
- High pressure wet-armature solenoids
- Various plug-connector systems and voltages are
available
Directional valve
2-way/2-position
Q
max
= 40 l/min, p
max
= 315 bar
switching solenoid, direct acting, poppet type
Type series: W1C_B… (installation deep)
Description
The 2-way/2-position solenoid operated directional
seat valves, series W1C_B (installation deep), are size
6, direct acting, pressure balanced, push-in valves.
They are designed on the poppet/seat principle and
are leak-tight in both ow directions (bidirectional se-
at-valve shut-o). The guide spool has a seal. This ver-
sion is the mounting version "deep" which ts into the
cavity AB according to factory standard. See separate
data sheet for the mounting version "shallow". These
valves are also available with or without manual over-
ride, and with the option of an additional hand lever.
All external parts of the screw-in valves are zinc-nickel
plated and are thus suitable for use in the harshest
operating environments. The slip-on coils can be
replaced without opening the hydraulic envelope and
can be positioned at any angle through 360°. These
valves are predominantly used in certain mobile and
industrial applications where leak-tight shut-o fun-
ctions are crucially important. Examples are where
loads, tensions, or clamping forces must be held wi-
thout leakage. For self-assembly, please refer to the
section related data sheets.
Symbol
Without manual override (standard)
With manual override