Z2FS 6…J 1/2
RE 27 506-M/08.00
RE 27 506-M/08.00
Double throttle check valve
Type Z2FS 6…J
When compared to the standard version the following modifications have been carried out:
– The external metal components have been electro-galvanised or given an anti-corrosion protection.
– The adjustment is protected against corrosion by a cap.
– Seawater resistance is identified by the code „J“ in the ordering code.
Note:
Valve fixing screws must be ordered separately:
4 off M5 DIN 912-10.9 A3C or NEL
1)
M
A
= 8.9 Nm, Material No. 00011396
1)
The code NEL stands for non-electrolytically applied zinc coatings which contain a lubrication additive for the reduction of friction in
accordance with ISO/WD 10683, colour silver.
Further information can be obtained from the standard documentation RE 27 506.
Ordering details
Preferred types
Type Material No.
Z2FS 6-2-4X/1QJ 00416482
Z2FS 6-2-4X/1QJV 00405544
Z2FS 6-2-4X/2QJ 00901959
Further details in clear text
No code = NBR seals
V = FKM seals
(other seals on request)
Attention!
The compatibility of the seals and
pressure fluid has to be taken into account!
J = Seawater resistance
1Q = With fine control
2Q = Standard version
Throttle check valve sides A and B = –
1)
Throttle check valve side A = A
Throttle check valve side B = B
Adjustment element
Adjustment screw with lock nut and protective cap = 2
*
Z2FS 6 –4X/ J V
1)
The same adjustment elements on sides A and B
Type Material No
Z2FS 6-2-4X/2QJV 00444252
Z2FS 6 A2-4X/1QJ 00931733
Z2FS 6 B2-4X/2QJV 00579751