1/2
IFC2 0T.F1.02.00.09 - Z
Insert type
Flow control, 2-way pressure
compensated fixed setting
A constant flow rate, regardless of system pressures, is established
from 1 to 2 while a minimum pressure differential of 145 psi (10
bar) exists between the two ports. The valve cannot be adjusted for
variable flow output. Flow from 2 to 1 is limited by the diameter of
the selected control orifice and is not pressure compensated.
Technical data
Description
Performance
RE 18329-70/03.16
Replaces: RE 18329-70/02.10
Max. operating pressure bar (psi) 210 (3000)
Max. flow l/min. (gpm)
see “Regulated flow range” table
Fluid temperature range °C (°F) -30 to 100 (-22 to 212)
Weight kg (lbs) 0.013 (0.03)
Special cavity see “Dimensions”
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult
factory
Seal kit (*)
code
material no.
RGIFC2010000100
R931002403
Fluids
Mineral-based or synthetics
with lubricating properties at
viscosities of 10 to 500 mm
2
/s (cSt)
Recommended degree of fluid
contamination
Nominal value max. 10µm (NAS 8)
ISO 4406 19/17/14
Other Technical Data See data sheet RE 18350-50
(*) Only external seals for 10 valves
2/2 Bosch Rexroth Oil Control S.p.A.
0TF1020009Z RE 18329-70/03.16
© This document, as well as the data, specifications and other
information set forth in it, are the exclusive property of Bosch Rexroth
Oil Control S.p.a.. It may not be reproduced or given to third parties
without its consent.
The data specified above only serve to describe the product. No
statements concerning a certain condition or suitability for a certain
application can be derived from our information. The information given
does not release the user from the obligation of own judgment and
verification. It must be remembered that our products are subject to a
natural process of wear and aging.
Subject to change.
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
Dimensions
Ordering code
Series 0/A to L
unchanged performances and dimensions
Insert type - Flow control,
2-way pressure compensated
fixed setting
Regulated flow range l/min. (gpm)
= 01 = 02 = 03 = 04 = 05 = 06 = 07 = 08 = 09 = 10
1 (0.3)
± 20%
2 (0.5)
± 20%
3 (0.8)
± 20%
4 (1.1)
± 15%
5 (1.3)
± 15%
6 (1.6)
± 15%
7 (1.9)
± 15%
8 (2.1)
± 15%
9 (2.4)
± 15%
10 (2.6)
± 15%
Port size Ø 12.7 (0.5)
0T.F1.02.00 09 Z *
Type Material number
0TF102000901000 R931002294
0TF102000902000 R931002295
0TF102000903000 R931002296
0TF102000904000 R931002297
0TF102000905000 R931002298
0TF102000906000 R931002299
0TF102000907000 R931002300
0TF102000908000 R931002301
0TF102000909000 R931002302
0TF102000910000 R931002303
Type Material number
