1/2
VUM1.180 0T.U6.04.00.99 - Z
When pressure at 1 rises above the spring bias pressure, the poppet is lifted
and flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. Precision
machining and hardening processes allow virtually leak-free performance in the
checked condition.
Note: to obtain a good leak proof performance coin the cavity seat using a
loose valve poppet (P/N 0F.S2.023) as a coining tool.
Impact energy: 7 ± 2 Nm.
Technical data
Description
Performance
RE 18329-54/10.10
Max. operating pressure bar (psi) 380 (5500)
Max. flow l/min. (gpm)
180 (48)
Max. internal
leakage
drops/min. 5
Fluid temperature range °C (°F) -30 to 100 (-22 to 212)
Installation torque Nm (ft-lbs) 50-55 (37-41)
Weight kg (lbs) 0.13 (0.29)
Special cavity 871
Seal kit (*)
code
material no.
RG0870020000100
R931002407
Fluids
Mineral-based or synthetics with
lubricating properties at viscosities of
5 to 800 mm
2
/s (cSt)
Filtration
Nominal value max. 10µm (NAS 8)
ISO 4406 19/17/14
Installation No restrictions
Other Technical Data See data sheet RE 18350-50
(*) Only external seals for 10 valves
Insert type
Check, poppet type
Special cavity, 871
2/2 Bosch Rexroth Oil Control S.p.A.
0TU6040099Z RE 18329-54/10.10
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
cartridges@oilcontrol.com
www.boschrexroth.com
Dimensions
Ordering code
Insert type - Check, poppet type
Series 0/A to L
unchanged performances and dimensions
SPRINGS
Special cavity, 871
Cracking pressure bar (psi)
= 00
1 (15)
0T.U6.04.00.99 Z *
Type Material number
0TU604009900000 R931002473
Type Material number
