from 1 to 2
from 2 to 1
1/2
VMA1.130 0T.M4.10 - X - 99 - Z - W
Insert type
Relief, direct acting and
anti-cavitation function
Special cavity, 924
Flow is free from 1 to 2 until pressure increases to meet the selected
valve setting, allowing relief flow through port 1 to tank. This valve
combine the typical function of shock relief valve (direct acting) and
anticavitation function through the check valve. The direct action and
the specific design allow a very fast opening and closing.
Note: to obtain a good leak proof performance coin the cavity seat
using a loose valve seat (P/N 0F.S0.083) as a coining tool.
Please consult factory for any question.
Technical data
Description
Performance
RE 18329-15/07.16
Replaces: RE 00162-02/11.10
Max. operating pressure bar (psi) 400 (5800)
Max. flow l/min. (gpm)
130 (34)
Max. internal
leakage (*)
drops/min. 30
Fluid temperature range °C (°F) -30 to 100 (-22 to 212)
Installation torque Nm (ft-lbs) 50-55 (37-41)
Weight kg (lbs) 0.12 (0.27)
Special cavity
924
see data sheet RE 18325-75
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult
factory
Seal kit (**)
code
material no.
RG0870020000100
R931002407
Fluids
Mineral-based or synthetics
with lubricating properties at
viscosities of 10 to 500 mm
2
/s (cSt)
Recommended degree of fluid
contamination
Nominal value max. 10µm (NAS 8)
ISO 4406 19/17/14
Installation No restrictions
Other Technical Data See data sheet RE 18350-50
(*) at 80% of pressure setting
(**) Only external seals for 10 valves
Dimensions
VMA7.130 version with
retainer ring availbale by
request fitting slightly
different cavity of VMA1.130
2/2 Bosch Rexroth Oil Control S.p.A.
0TM410X99ZW RE 18329-15/07.16
© This document, as well as the data, specifications and other
information set forth in it, are the exclusive property of Bosch Rexroth
Oil Control S.p.a.. It may not be reproduced or given to third parties
without its consent.
The data specified above only serve to describe the product. No
statements concerning a certain condition or suitability for a certain
application can be derived from our information. The information given
does not release the user from the obligation of own judgment and
verification. It must be remembered that our products are subject to a
natural process of wear and aging.
Subject to change.
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
Type Material number
0TM410009905020 R931002246
0TM410009905030 R931002247
0TM410009905040 R931002248
0TM410009905050 R931001860
0TM410009905060 R931002253
0TM410009905070 R931001861
0TM410009905080 R931001864
0TM410009905090 R931002254
0TM410009905100 R931002089
0TM410009910020 R931002255
0TM410009910030 R931001587
0TM410009910040 R931002256
0TM410009910050 R931001869
0TM410009910060 R931002257
0TM410009910070 R931001870
0TM410009910080 R931001600
0TM410009910090 R931002090
0TM410009920020 R931002258
0TM410009920030 R931002259
0TM410009920040 R931001871
Type Material number
0TM410009920050 R931001659
0TM410009920060 R931002260
0TM410009920070 R931002261
0TM410009920080 R931002262
0TM410009930020 R931002263
0TM410009930030 R931001727
0TM410009930040 R931002264
0TM410009930050 R931002265
0TM410009930060 R931002266
0TM410009935020 R931002267
0TM410009935030 R931001779
0TM410009935040 R931002268
0TM410009935050 R931002269
0TM410009935060 R931002270
0TM410009935070 R931002271
0TM410009935080 R931001872
0TM410009935090 R931001780
0TM410009935100 R931002272
0TM410009935110 R931002273
Ordering code
Insert type - Relief, direct
acting and anti-cavitation function
Series 0/A to L
unchanged performances and dimensions
Adjustments
= 00 Fixed setting
Special cavity, 924
Std. SETTING bar (psi) Q=10 l/min (2.6 gpm)
for
Z=05
for
Z=10
for
Z=20
for
Z=30
for
Z=35
SPRINGS
= 02
20
(290)
110
(1600)
190
(2760)
260
(3770)
310
(4500)
Adj. pressure range bar (psi)
= 03
30
(440)
120
(1750)
200
(2900)
270
(3920)
320
(4640)
20-100 (300-1500)
= 05 = 04
40
(580)
130
(1890)
210
(3050)
280
(4060)
330
(4790)
100-180 (1500-2600)
= 10 = 05
50
(730)
140
(2030)
220
(3190)
290
(4210)
340
(4930)
180-250 (2600-3600)
= 20 = 06
60
(870)
150
(2180)
230
(3340)
300
(4350)
350
(5080)
250-300 (3600-4400)
= 30 = 07
70
(1020)
160
(2320)
240
(3480)
360
(5220)
300-400 (4400-5800)
= 35 = 08
80
(1160)
170
(2470)
250
(3630)
370
(5370)
= 09
90
(1300)
180
(2610)
380
(5510)
= 10
100
(1450)
390
(5660)
= 11
400
(5800)
0T.M4.10 X 99 Z W *
