from 1 to 2
from 2 to 1
1/2
VMA1.060 0T.M4.07 - X - 99 - Z - W
Insert type
Relief, direct acting and
anti-cavitation function
Special cavity, 808
Flow is free from 1 to 2 until pressure increases to meet the selected valve
setting, allowing relief flow through port 1 to tank. This valve combine the
typical function of shock relief valve (direct acting) and anticavitation function
through the check valve. The direct action and the specific design allow a very
fast opening and closing.
Note: to obtain a good leak proof performance coin the cavity seat using a
loose valve seat (P/N 0F.S0.036) as a coining tool.
Impact energy: 5 ± 2 Nm.
Technical data
Description
Performance
RE 18329-13/03.16
Replaces: RE 18329-13/11.10
Max. operating pressure bar (psi) 380 (5500)
Max. flow l/min. (gpm)
75 (20)
Max. internal
leakage (*)
drops/min. 30
Fluid temperature range °C (°F) -30 to 100 (-22 to 212)
Installation torque Nm (ft-lbs) 40-45 (33-37)
Weight kg (lbs) 0.05 (0.11)
Special cavity 808 see data sheet RE 18325-75
MTTFd 150 years see data sheet 18350-51
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult
factory
Seal kit (**)
code
material no.
RG0730020000100
R931002406
Fluids
Mineral-based or synthetics with
lubricating properties at viscosities of
10 to 500 mm
2
/s (cSt)
Recommended degree of fluid
contamination
Nominal value max. 10µm (NAS 8)
ISO 4406 19/17/14
Installation No restrictions
Other Technical Data See data sheet RE 18350-50
(*) at 80% of pressure setting
(**) Only external seals for 10 valves
Dimensions
VMA7.060 version with retainer
ring availbale by request fitting
slightly different cavity of
VMA1.060
2/2 Bosch Rexroth Oil Control S.p.A.
0TM407X99ZW RE 18329-13/03.16
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
Type Material number
0TM407009905010 R931002169
0TM407009905020 R931002168
0TM407009905030 R931002170
0TM407009905040 R931002171
0TM407009905050 R931002172
0TM407009905060 R931002173
0TM407009905070 R931002174
0TM407009905080 R931002175
0TM407009905090 R931002176
0TM407009910020 R931002077
0TM407009910030 R931002177
0TM407009910040 R931002080
0TM407009910050 R931002179
0TM407009910060 R931002180
0TM407009910070 R931002181
0TM407009910080 R931002183
0TM407009920020 R931002204
0TM407009920030 R931002205
0TM407009920040 R931002206
Type Material number
0TM407009920050 R931002207
0TM407009920060 R931002208
0TM407009920070 R931002209
0TM407009930020 R931002210
0TM407009930030 R931002211
0TM407009930040 R931002212
0TM407009930050 R931001966
0TM407009930060 R931002213
0TM407009930070 R931001967
0TM407009930080 R931002214
0TM407009935020 R931002215
0TM407009935030 R931001427
0TM407009935040 R931001968
0TM407009935050 R931001969
0TM407009935060 R931002216
0TM407009935070 R931002217
0TM407009935080 R931001970
0TM407009935090 R931002218
Ordering code
Insert type - Relief, direct acting
and anti-cavitation function
Series 0/A to L
unchanged performances and dimensions
Adjustments
= 00 Fixed setting
Special cavity, 808
Std. SETTING bar (psi) Q=5 l/min (1.3 gpm)
for
Z=05
for
Z=10
for
Z=20
for
Z=30
for
Z=35
SPRINGS
= 01
20
(290)
Adj. pressure range bar (psi)
= 02
30
(440)
110
(1600)
180
(2610)
240
(3480)
310
(4500)
20-100 (290-1500)
= 05 = 03
40
(580)
120
(175 0 )
190
(2760)
250
(3630)
320
(4640)
100-170 (1500-2500)
= 10 = 04
50
(730)
130
(1890)
200
(2900)
260
(3770)
330
(4790)
170-230 (2500-3300)
= 20 = 05
60
(870)
140
(2030)
210
(3050)
270
(3920)
340
(4930)
230-300 (3300-4400)
= 30 = 06
70
(1020 )
150
(2180)
220
(3190)
280
(4060)
350
(5080)
300-380 (4400-5500)
= 35 = 07
80
(1160 )
160
(2320)
230
(3340)
290
(4210 )
360
(5220)
= 08
90
(1300)
170
(2470)
300
(4350)
370
(5370)
= 09
100
(1450)
380
(5510)
0T.M4.07 X 99 Z W *
