RE 18324-09/06.2019, Bosch Rexroth Oil Control S.p.A.
Solenoid operated valves direct acting spool type
4-way 2-position
Common cavity, Size 08
RE 18324-09
Edition: 06.2019
Replaces: 11.2018VED-16-08A-42 OD.14 - X - 58 - Y - Z
Technical data
General
Weight 0.14kg (0.31lbs)
Installation orientation Unrestricted
Storage ambient temperature range -40 to 100°C (-40 to 212°F)
Operating ambient temperature range -30 to 90°C (-22 to 194°F)
Hydraulic
Max. operating pressure up to 280bar (4060psi) *
Max. flow up to 20l/min (5 gpm)
Max. internal leakage at 230 bar 40 cm
3
/min. (2.4 cu.in/min.)
Fatigue cycle life 1 million cycles at 250 bar
Fluid temperature range -20 to 80°C (-4 to 176°F)
Fluids: Mineral-based or synthetics with lubricating properties at
viscosities of 20 to 380 mm
2
/s (cSt)
Installation torque 34 - 39Nm (25 - 29ft-lbs)
Recommended degree of fluid
contamination
Nominal value max. 10µm
(NAS 8) ISO 4406 19/17/14
MTTFd
150 years see RE 18350-51
Cavity
CA-08A-4N see 18325-70
Seal kit
code
material no.
RG08A4010530100
R930005582
Seal kit coil and standard
cap
code
material no.
RG02Z0010000100
R930067869
Other technical data See data sheet 18350-50
Electrical
Type of voltage DC voltage
Coil type D36
Supply voltage See data sheet 18325-90
Admitted voltage tolerance: -10% / +25% of nominal voltage at 60°C amb. T
Power consumption 20W
Type of protection See data sheet 18325-90
Note: Coils must be ordered separately
* See performance limits at page 3.
▼ Version 40 ▼ Version 41 ▼ Version 43 ▼ Version 45
▼ Version 47 ▼ Version 51 ▼ Version 11
Bosch Rexroth Oil Control S.p.A., RE 18324-09/06.2019
2 VED-16-08A-42 | Solenoid operated valves
Ordering code
Type Material number
OD144058A000000 R930058339
OD144058D000000 R930058713
OD144158A000000 R930058701
OD144158D000000 R930058711
OD144358A000000 R930058699
OD144358D000000 R930058714
OD144558A000000 R930058700
OD144558D000000 R930058712
Type Material number
OD144758A000000 R930058698
OD144758D000000 R930058715
OD145158A000000 R930071561
OD141158A000000 R930067156
Solenoid operated valves
direct acting spool type
4-way 2-position
0 = With Buna seal
V = With Viton seal
A = Standard
D = Knob style manual override
Common cavity: CA-08A-4N
OD.14 X 58 Y Z 0000 *
40
41
43
45
47
51
11
Series 0/A to L
unchanged performances and dimensions
RE 18324-09/06.2019, Bosch Rexroth Oil Control S.p.A.
Solenoid operated valves | VED-16-08A-42 06.2019 3
Characteristic curves
Version 40 Performance limits at 100% duty cycle
Pressure drop
Flow Q
Pressure Δp
Flow Q
Pressure Δp
Version 41 Performance limits at 100% duty cycle at 90°C and 60°C amb. T.
Pressure drop
Flow Q
Pressure Δp
Flow Q
Pressure Δp
Version 43 Performance limits at 100% duty cycle at 90°C and 60°C amb. T.
Pressure drop
Flow Q
Pressure Δp
Flow Q
Pressure Δp
Version 45 Performance limits at 100% duty cycle at 90°C and 60°C amb. T.
Pressure drop
Flow Q
Pressure Δp
Flow Q
Pressure Δp
Version 47 Performance limits at 100% duty cycle at 90°C and 60°C amb. T.
Pressure drop
Flow Q
Pressure Δp
Flow Q
Pressure Δp
Bosch Rexroth Oil Control S.p.A., RE 18324-09/06.2019
4 VED-16-08A-42 | Solenoid operated valves
Characteristic curves
Version 51 Performance limits at 100% duty cycle
Pressure drop
Flow Q
Pressure Δp
Flow Q
Pressure Δp
Version 11 Performance limits at 100% duty cycle at 90°C and 60°C amb. T.
Pressure drop
Flow Q
Pressure Δp
Flow Q
Pressure Δp
Minimum switching voltage for all versions and 100% ED
Amb. T Voltage required
60°C -10% of V nominal
90°C V nominal
Note: in case of need of performance limits
at specific different working conditions,
please consult factory.
RE 18324-09/06.2019, Bosch Rexroth Oil Control S.p.A.
Solenoid operated valves | VED-16-08A-42 06.2019 5
Dimensions
Solenoid operated valves, direct acting
spool type 4-way 2-position
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
may not be reproduced or given to third parties without its consent. The data
specified above only serve to describe the product. No statements concerning
a certain condition or suitability for a certain application can be derived from
our information. The information given does not release the user from the
obligation of own judgment and verification. It must be remembered that our
products are subject to a natural process of wear and aging. Subject to change.
Standard type
Knob style manual override