RE 18321-31/06.2017, Bosch Rexroth Oil Control S.p.A.
Flow control, 2-way pressure compensated,
Fixed setting
Special cavity, R/MH2FR04K
RE 18321-31
Edition: 06.2017
Replaces: 04.2016MH2FR
Technical data
General
Weight 0.03kg (0.07lbs)
Installation position Any
Ambient temperature range -30 to 100°C (-22 to 212°F) NBR
-15 to 100 °C (5 to 212°F) FKM
Hydraulic
Max. operating pressure 420bar (6090psi)
Rated flow 0.4 - 0.7 - 1.2 l/min.
Fluid temperature range -20 to 80°C (-4 to 176°F)
Fluids: Mineral-based or synthetics with lubricating properties at
viscosities of 10 to 800 mm
2
/s (cSt)
Installation torque 20 - 25 Nm (15 - 19 ft-lbs)
Filtration Class 20/18/15 ISO 4406
Special cavity R/MH2FR04K
Note: The valves are not provided with any surface protection.
Description
The valve type MH2FR is a 2-way flow control valve for
block design installation. It is used for pressure and
temperature independent flow stabilization. If the direction
of flow runs from 1 to 2 through the valve, the pressure in
channel 1 exerts force on the pressure compensator. The
pressure compensator moves to the control position until
the forces are balanced. If the pressure in channel 1 or 2
changes, the pressure compensator keeps readjusting and
thereby maintains a constant pressure drop and the
unchanging cross-section of the throttling point provide for
a constant flow. In the direction of flow from 2 to 1, the
return flow runs freely via the throttling point.
Characteristic curve
At the beginning of control (8 bar), the stated flow is
present with a tolerance of +35% / -5%
2
Bosch Rexroth Oil Control S.p.A., RE 18321-31/06.2017
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
may not be reproduced or given to third parties without its consent. The data
specified above only serve to describe the product. No statements concerning
a certain condition or suitability for a certain application can be derived from
our information. The information given does not release the user from the
obligation of own judgment and verification. It must be remembered that our
products are subject to a natural process of wear and aging. Subject to change.
MH2FR | Flow control, 2-way pressure compensated Fixed setting
Dimensions [mm (inches)]
Bosch Rexroth Oil Control S.p.A., RE 18321-31/06.2017
2 MH2FR | Flow control, 2-way pressure compensated Fixed setting
Dimensions [mm (inches)]
Ordering code
MH2FR 04 K A 2X/ V *
Flow control, 2-way pressure compensated
Fixed setting
For further information, see the
plain text
V =
Seal material
FKM seals
(other seals on request)
Attention!
Observe compatibily of
seals with the hydraulic
fluid used!
Component series 20 to 29
Unchanged installation and connection dimensions
0.4 l/min. 0.4
0.7 l/min. 0.7
1.2 l/min. 1.2
Preferred types
Type Material number
MH2FR 04 KA2X/0.4V R900753499
MH2FR 04 KA2X/0.7V R901047887
MH2FR 04 KA2X/1.2V R901137792
Type Material number
Dimensions
▼ Flow control, 2-way pressure compensated Fixed setting
