RE 18321-17/03.2016, Bosch Rexroth Oil Control S.p.A.
Description
A constant flow rate, regardless of system pressures, is
established from 1 to 3 while a minimum pressure
differential of 14 bar (200 psi) exists between the two
ports. Input flow supplied to 1 in excess of the regulated
output at 3 is by-passed to 2. Output flow can be varied
through a limited range of adjustment and coordinate
change in minimum required pressure differential. Flow
from 3 to 1 is limited by the diameter of the selected
control orifice and is not pressure compensated. Flow from
2 to 1 is not permitted.
Flow control, 3-way pressure compensated,
combination type partially adjustable
Common cavity, Size 10
RE 18321-17
Edition: 03.2016
Replaces: 09.2009VRFC-10A 04.04.01 - X - 85 - Z
Technical data
Pressure min. - max. 14 - 350 bar (200 - 5000 psi)
Max. inlet fow 60 l/min. (16 gpm)
Flow range see “Regulated flow range” table
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 41 - 47 Nm (30 - 35 ft-lbs)
Weight
1)
0.26 kg (0.57 lbs)
Cavity CA-10A-3N (see data sheet 18325-70)
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult factory
Seal kit
2)
Code: RG10A3010520100
material no: R901111369
Fluids Mineral-based or synthetics with
lubricating properties
at viscosities of 10 to 500 mm
2
/s (cSt)
Recommended degree of
fluid contamination
Nominal value max. 10µm (NAS 8) /
ISO 4406 19/17/14
Installation No restrictions
Other Technical Data See data sheet 18350-50
1) Standard version X=03 type
2) Only external seals for 10 valves
Characteristic curve
PRESSURE
REGULATED FLOW
2
Bosch Rexroth Oil Control S.p.A., RE 18321-17/03.2016
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
may not be reproduced or given to third parties without its consent. The data
specified above only serve to describe the product. No statements concerning
a certain condition or suitability for a certain application can be derived from
our information. The information given does not release the user from the
obligation of own judgment and verification. It must be remembered that our
products are subject to a natural process of wear and aging. Subject to change.
VRFC-10A | Flow control, 3-way pressure compensated
Dimensions [mm (inches)]
Ordering code
Dimensions
Leakproof hex. socket screw
Handknob and locknut
Flow control, 3-way pressure compensated
combination type partially adjustable
Series 0/A to L
unchanged performances and dimensions
Version and options standard
Regulated flow range
l/min. (gpm)
Adjustments
02
1.5-2.5 (0.4-0.66)
03 Leakproof hex. socket screw 04 3-4.2 (0.79-1.11)
04 Handknob and locknut 06 4-5.8 (1.06-1.53)
08 5.5-7.8 (1.45-2.06)
09
6.5-9.5 (1.72-2.51)
85 Common cavity, Size 10 11 7.5-11 (1.98-2.91)
14 9.5-14 (2.51-3.70)
20 13-20 (3.44-5.28)
26 19-26 (5.02-6.87)
Preferred types
04.04.01 X 85 Z 00 *
Type Material number
040401038502000 R930000266
040401038504000 R901106648
040401038506000 R901106652
040401038508000 R901106657
040401038509000 R901106659
040401038511000 R901106660
040401038514000 R901106661
040401038520000 R901106662
040401038526000 R901106663
Type Material number
040401048504000 R901106664
040401048506000 R901106665
040401048508000 R901106666
040401048509000 R901106667
040401048511000 R901106668
040401048514000 R901106669
040401048520000 R901106670
040401048526000 R901106671
