RE 18320-77/03.2016, Bosch Rexroth Oil Control S.p.A.
Technical data
Max. operating pressure 350 bar (5000 psi)
Max. flow 50 l/min. (13 gpm)
Max. internal leakage
1)
50 cm
3
/min. (3 cu.in./min.)
Pilot displacement volume 0.28 cm
3
(0.02 cu.in.)
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 41 - 47 Nm (30 - 35 ft-lbs)
Weight 0.2 kg (0.44 lbs)
Cavity CA-10A-3N (see data sheet 18325-70)
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult factory
Seal kit
2)
Code: RG10A3010530100
material no: R930000990
Fluids Mineral-based or synthetics with
lubricating properties at viscosities of
10 to 500 mm
2
/s (cSt)
Recommended degree of
fluid contamination
Nominal value max. 10µm (NAS 8) /
ISO 4406 19/17/14
Installation position No restrictions
Other Technical Data See data sheet 18350-50
1) Measured at 200 bar (2900 psi)
2) Only external seals for 10 valves
Description
Flow is blocked bi-directionally at 2 and 3 until pressure at
1 rises to overcome the spring bias against the spool. When
this bias pressure is surpassed, the spool shifts, allowing
flow from 2 to 3, or 3 to 2. The spring chamber is sealed and
vented to atmosphere, allowing consistent shifting with only
spring bias pressure independent of conditions at 2 or 3.
Directional spool type, direct acting,
external pilot external vent
Common cavity, Size 10
RE 18320-77
Edition: 03.2016
Replaces: 01.2010VDSC-10A 04.77.21 - X - 85 - Z
Characteristic curve
Flow Q
Pressure Δp