RE 18320-30/03.2016, Bosch Rexroth Oil Control S.p.A.
Technical data
Max. operating pressure 420 bar (6000 psi)
Max. flow 480 l/min (127 gpm)
Max. internal leakage
1)
15 drops/min.
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 475 - 500 Nm (352 - 370 ft-lbs)
Weight 1.7 kg (3.7 lbs)
Cavity SUN T-19A
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult factory
Seal kit
2)
Code: RG25U9020110100
material no: R930006268
Fluids Mineral-based or synthetics with
lubricating properties
at viscosities of 10 to 500 mm
2
/s (cSt)
Recommended degree of
fluid contamination
Nominal value max. 10µm (NAS 8) /
ISO 4406 19/17/14
Installation position No restrictions
Other Technical Data See data sheet 18350-50
Pressure setting: at least 1.3 times the load induced pressure.
1) At 70% of pressure setting
2) Only external seals for 10 valves
Description
When pressure at 2 rises above the spring bias pressure,
the check seat is pushed away from the piston and flow is
allowed from 2 to 1. When load pressure at 1 rises above
the pressure setting (turn counterclockwise to increase
setting - turn clockwise to decrease setting), the direct-
acting, differential area relief function is activated and flow
is relieved from 1 to 2. With pilot pressure at 3, the pressure
setting is reduced in proportion to the stated ratio of the
valve, until fully open with free-flow from 1 to 2. The valve
applies a balanced piston design allowing relief operation
at the valve setting independent of back-pressure at 2.
However, the piloted opening of the valve remains subject to
additive pressure at port 2.
Counterbalance, relief compensated
poppet type differential area, counterclockwise adjustment
Sun cavity interchange, T-19A
RE 18320-30
Edition: 03.2016
Replaces: 11.2015VBSP-25U-RS 04.54.18 - X - 50 - Z
Characteristic curve
Flow Q
Pressure Δp