RE 18318-23/03.2016, Bosch Rexroth Oil Control S.p.A.
Technical data
Max. operating pressure
port 1 (P)
350 bar (5000 psi)
Max. pressure admitted
port 2 (T)
140 bar (2000 psi)
Max. flow 30 l/min (8 gpm)
Max. internal leakage
1)
15 drops/min.
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 45 - 50 Nm (33 - 37 ft-lbs)
Weight
2)
0.17 kg (0.38 lbs)
Special cavity 008 (see data sheet 18325-75)
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult factory
Seal kit
3)
Code: RG0008010000100
material no: R930001692
Fluids Mineral-based or synthetics with
lubricating properties
at viscosities of 10 to 500 mm
2
/s (cSt)
Recommended degree of
fluid contamination
Nominal value max. 10µm (NAS 8) /
ISO 4406 19/17/14
Installation position No restrictions
Other Technical Data See data sheet 18350-50
1) At 80% of pressure setting
2) Standard version 03 type
3) Only external seals for 10 valves
Description
Flow is blocked from 1 to 2 until pressure increases to meet
the selected valve setting, lifting the poppet from its seat
and allowing relief flow through port 2 to tank. Pressure at
port 2 is additive to the relief setting of the valve. The unique
Bosch Rexroth Oil Control poppet design provides enhanced
stability at all flows and pressures.
Relief, direct acting guided
poppet type
Special cavity, 008
RE 18318-23
Edition: 03.2016
Replaces: 07.2010VS-30 04.11.18 - X - 99 - Z
Characteristic curve
Flow Q
Pressure Δp
2
Bosch Rexroth Oil Control S.p.A., RE 18318-23/03.2016
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
may not be reproduced or given to third parties without its consent. The data
specified above only serve to describe the product. No statements concerning
a certain condition or suitability for a certain application can be derived from
our information. The information given does not release the user from the
obligation of own judgment and verification. It must be remembered that our
products are subject to a natural process of wear and aging. Subject to change.
VS-30 | Relief, direct acting guided
Dimensions [mm (inches)]
Ordering code
Type Material number
041118039905000 R901113613
041118039910000 R901113614
041118039920000 R901226876
041118039935000 R901113617
Type Material number
041118049905000 R930000148
041118049910000 R930000149
041118049920000 R901127942
041118049935000 R930000151
Dimensions
Leakproof hex. socket screw
OPTION
Tamper resistant cap
ordering code 11.04.23.003
Mat. no. R930000754
Handknob and locknut
04.11.18 X 99 Z 00 *
Series 0/A to L
unchanged performances and dimensions
Relief, direct acting guided
poppet type
Version and options standard
SPRINGS
Adjustments
Adj. press. range
bar (psi)
Pressure increase
bar/turn (psi/turn)
Std. setting
bar (psi)
Q=5 l/min03 Leakproof hex. socket screw
04 Handknob and locknut
05 * 5-50 (75-725) 12 (174) 50 (725)
10 30-100 (435-1450) 24 (348) 100 (1450)
99 Special cavity, 008
20 50-210 (725-3000) 47 (682) 200 (2900)
35 100-350 (1450-5000) 82 (1189) 350 (5000)
Preferred types
Note: Special settings available. Contact factory authorized representative
for ordering code.
* minimum pressure setting intended with Q=5 l/min
