RE 18318-05/07.2016, Bosch Rexroth Oil Control S.p.A.
Technical data
Max. operating pressure
port 1 (P)
350 bar (5000 psi)
Max. pressure admitted
port 2 (T)
350 bar (5000 psi)
Max. flow 50 l/min (13 gpm)
Max. internal leakage
1)
15 drops/min.
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 41 - 47 Nm (30 - 35 ft-lbs)
Weight 0.2 kg (0.44 lbs)
Cavity CA-10A-2N (see data sheet 18325-70)
Lines bodies and standard
assemblies
Please refer to section “Hydraulic
integrated circuit” or consult factory
Seal kit
2)
Code: RG10A2010530100
material no: R901111366
Fluids Mineral-based or synthetics with
lubricating properties
at viscosities of 10 to 500 mm
2
/s (cSt)
Recommended degree of
fluid contamination
Nominal value max. 10µm (NAS 8) /
ISO 4406 19/17/14
Installation position No restrictions
Other Technical Data See data sheet 18350-50
1) At 80% of pressure setting
2) Only external seals for 10 valves
Description
Flow is blocked from 1 to 2 until pressure increases to meet
the selected valve setting, lifting the poppet from its seat
and allowing relief flow through port 2 to tank. Pressure at
port 2 is additive to the relief setting of the valve. The unique
Bosch Rexroth Oil Control poppet design provides enhanced
stability at all flows and pressures.
Relief, direct acting guided
poppet type
Common cavity, Size 10
RE 18318-05
Edition: 07.2016
Replaces: 03.2016VSBN-10A 04.11.55 - X - 85 - Z
Characteristic curve
Flow Q
Pressure Δp
2
Bosch Rexroth Oil Control S.p.A., RE 18318-05/07.2016
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
compact-hydraulics-cv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
may not be reproduced or given to third parties without its consent. The data
specified above only serve to describe the product. No statements concerning
a certain condition or suitability for a certain application can be derived from
our information. The information given does not release the user from the
obligation of own judgment and verification. It must be remembered that our
products are subject to a natural process of wear and aging. Subject to change.
VSBN-10A | Relief, direct acting guided
Dimensions [mm (inches)]
Ordering code
Type Material number
041155038505000 R901191831
041155038510000 R901113609
041155038520000 R901113610
041155038535000 R901115702
Type Material number
041155048510000 R930058261
041155048535000 R930058262
Dimensions
Leakproof hex. socket screw Handknob and locknut
OPTION
Tamper resistant cap
ordering code 11.04.23.002
Mat. no. R930000752
Series 0/A to L
unchanged performances and dimensions
Relief, direct acting guided
Version and options standard
SPRINGS
Adjustments
Adj. press. range
bar (psi)
Pressure increase
bar/turn (psi/turn)
Std. setting
bar (psi)
Q=5 l/min
03 Leakproof hex. socket screw
04 Handknob and locknut
for
X= 03
05 * 5-70 (75-1000) 16 (232) 50 (725)
10 35-140 (500-2000) 24 (348) 100 (1450)
20 105-210 (1500-3000) 54 (783) 200 (2900)
85 Common cavity, Size 10
35
175-350 (2500-5000) 84 (1218) 350 (5000)
for
X= 04
10 25-110 (363-1595) 19 (276) 100 (1450)
35 90-350 (1305-5075) 68 (986) 350 (5000)
Preferred types
04.11.55 X 85 Z 00 *
Note: Special settings available. Contact factory authorized representative
for ordering code.
* minimum pressure setting intended with Q=5 l/min
