1/2
A-VMS-10-NC FC 10 NC
End of stroke
normally closed
This pushbuttom valve allows oil passage in a hydraulic circuit (normally
closed valve); once the slider is set into action oil flow is free from B to
A and it can be used as end of stroke valve where the flow is directly
connected to the tank.
Connect A directly to the tank and B as for necessity; mounting scheme
can vary according to the use.
Technical data
Description
Hydraulic
Max. operating pressure bar (psi) 250 (3600)
Max. flow l/min (gpm)
30 (8)
Relief setting: at least 1.3 times the highest expected load.
General
Manifold material Steel
Weight kg (lbs) 0.8 (1.76)
Fluid temperature
range
°C (°F) between -30 (-22) and +100 (212)
Other technical data see data sheet RE 18350-50
Note: for applications outside these parameters, please consult us.
Performance
RE 18310-19/05.11
Replaces: RE 18310-19/04.10
of stroke
FC10NC RE 18310-19/05.11
2/2 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
motion-control-valves@oilcontrol.
com
www.boschrexroth.com
© This document, as well as the data, specifications and other
information set forth in it, are the exclusive property of Bosch Rexroth
Oil Control S.p.a.. It may not be reproduced or given to third parties
without its consent.
The data specified above only serve to describe the product. No
statements concerning a certain condition or suitability for a certain
application can be derived from our information. The information given
does not release the user from the obligation of own judgment and
verification. It must be remembered that our products are subject to a
natural process of wear and aging.
Subject to change.
Spring weight - N
End stroke Of stroke
80 240
Type Material number
FC 10 R932500192
FC 10
Type Material number
Dimensions
Ordering code
End of stroke Ports G 3/8
