Bosch Rexroth AG, RE 18303-02/02.2016
4 L50L0… (LC04-LV) | 4/3 - 4/2 way Directional valves
Functional description
Functional description
1324
5
(T)
A
P
B(T)
Type L50L0
The hand lever operated valves type L 50L0 provide 3 or 4
way fl ow control, usually from port P to either port A or B,
and the consequent fl ow return to T from B or A
respectively.
The valves are composed by a central cast iron body (1)
which mounts on industry standard surfaces where the
fl ow ports and the installation holes are located; the central
body houses the precisely machined directional control
spool (2) can travel between 2 or 3 position, and which is
held in the neutral or initial position by the return spring
(5), or can be maintained in the shifted poisition by a
mechanical detent.
Through the hand operated lever (3), the control spool can
be pushed from the initial position into a shifted position
where oil fl ow is allowed from P to either A or B.
The control spool assembly (4) is available also with
mechanical detent which holds the spool in the shifted
position: in this case the spool can be brought back into
the central or initial position only by actuating the hand
operated lever (3).
Type L50L0_201_0M100
(available with hydraulic schemes =_M__ see page 17)
These are 2 or 3 positions hand lever operated valves with
control spool (2) normally kept in the neutral or initial
position by the return spring (5): when the control lever (3)
is released, the spool (2) returns to the central or initial
position pushed by the spring force.
Type L50L0_201_0F100
(available with hydraulic schemes =_F__ see page 17)
In these valves the directional control spool (2) can travel
between 2 or 3 positions, each one with mechanical detent:
the spool (2) stays in any reached position also if the hand
control lever (3) is released. The hand operated lever
needs to be actuated only in order to shift the spool from
one position to another one.