RE 18300-14/02.2016, Bosch Rexroth AG
Inlet Elements
with LS connections and double pressure relief valve (P and LS line)
RE 18300-14
Edition: 02.2016
Replaces: 07.2012TE-16-__-
Description
The inlet elements TE-16-__ are employed to connect the
external P,T lines to the P,T channels inside the ED elements
of the Directional Valve Assembly and to connect the LS
ports of the elements equipped with LS channels. They
incorporate two pressure relief cartridge which limits the
maximum primary pressure in the P line and the maximum
load pressure in the LS line and unloads to tank any excess
fl ow.
The TE-16-__ inlet elements are available with body made of
yellow zinc plated (Cr+3) cast iron (CI).
Ports sizes can be G 1/2 or G 3/4 or SAE10 (7/8” 14 UNF).
LS ports are G 1/4 for BSPP version, and SAE 4 (7/16” 20
UNF) for “UNF” version.
Technical data
General
TE16... kg (lbs) 2.6 (6)
Ambient Temperature °C (°F) –20....+50 (-4....+122)
(NBR seals)
Hydraulic
Maximum pressure bar (psi) 310 (4500)
Maximum fl ow l/min (gpm) 120 (31.7)
Hydraulic fl uid
General properties: it must have
physical lubricating and chemical
properties suitable for use in
hydraulic systems such as, for
example:
Mineral oil based hydraulic
fl uids HL (DIN 51524 part 1).
Mineral oil based hydraulic
fl uids HLP (DIN 51524 part 2).
For use of environmentally
acceptable fl uids
(vegetable or polyglycol
base) please consult us.
Fluid Temperature °C (°F) –20....+80 (-4....+176) (NBR)
Permissible degree of
fl uid contamination
ISO 4572: β
x
≥75 X=12...15
ISO 4406: class 19/17/14
NAS 1638: class 8
Viscosity range mm
2
/s 5....420
Note
For applications with different specifi cations consult us
Bosch Rexroth AG., RE 18300-14/02.2016
2 TE-16-__- | Inlet Elements
Ordering details
Ordering details
01 02 03 04 05 06 07
TE-16- - - - -CI
Family
01 Inlet Elements
TE
Confi guration
02 Inlet plate for LS pump system with double check valve
(on P and LS line)
16
Ports
03 G 1/2 DIN 3852
03
G 3/4 DIN 3852
04
7/8-14 UNF-2B (SAE10)
57
Primary pressure relief range
04 35-140 bar (508-2030 psi)
10
70-280 bar (1015-4060 psi)
20
140-420 bar (2030-6091 psi)
35
Plugged
0P
Secondary pressure relief valve
05 25-120 bar (362-1470 psi)
SN
40-200 bar (580-2900 psi)
SB
200-350 bar (2900-5076 psi)
SV
Plugged
0P
Size of drain orifi ce for LS
06 Closed
0X
Diam. 0.3 (Ø0.5+wire0.4)
1)
0C
Diameter 0.4
0E
Diameter 0.5
0G
Material
07 Cast Iron
CI
1) Recommended version.
Symbol
TE-16-__-
T
P
LS
TE-16-__- 0P - 0P
T
P
LS
RE 18300-14/02.2016, Bosch Rexroth AG
Inlet Elements | TE-16-__-
External dimensions and fi ttings
3
Dimensions [mm (inches)]
External dimensions and fi ttings
TE - 16 - . .
TE - 16 - . . - 0P - 0P
()
()
()
()
()
()
()
()
()
()
()
()
()()()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
1 Flange specifi cations for coupling to the ED Directional Valve
Elements
2 Three threaded holes M8 for coupling of the ED Directional Valve
Elements (refer to RE 18301-90/10.09).
3 Hydraulic ports P and T G 3/4 , inlet elements
TE-16-04-…
4 Hydraulic ports MP,LS, G 1/4, inlet elements TE-16-03-... and
hydraulic ports LS G 1/4, inlet elements TE-16-04-..
5 Hydraulic ports P and T SAE10, inlet elements TE-16-57-…
6 Hydraulic ports LS SAE4, inlet elements TE-16-57-…
7 Primary pressure relief cartridge (P line) VSPN-10A, with screw
type adjuster (refer to RE18318-08-09.09).
8 Secondary pressure relief cartridge (LS line) VMD1020, with
screw type adjuster.
9 plugs for primary and secondary pressure relief valves
10 Hydraulic ports MP G 1/4, available only for inlet elements
TE-16-03-..
11 Hydraulic ports P and T G 1/2, inlet elements TE-16-03-..
4
Bosch Rexroth AG, RE 18300-14/02.2016
TE-16-__- | Inlet Elements
Bosch Rexroth Oil Control S.p.A.
Oleodinamica LC Division
Via Artigianale Sedrio, 12
42030 Vezzano sul Crostolo
Reggio Emilia - Italy
Tel. +39 0522 601 801
Fax +39 0522 606 226 / 601 802
compact-hydraulics-cdv@boschrexroth.com
www.boschrexroth.com/compacthydraulics
© This document, as well as the data, specifi cations and other information
set forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a..
It may not be reproduced or given to third parties without its consent.
The data specifi ed above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the
user from the obligation of own judgment and verifi cation. It must be
remembered that our products are subject to a natural process of wear and
aging.
Subject to change.
