RE 18300-09/02.2016, Bosch Rexroth AG
Inlet Elements
with primary pressure relief valve
and proportional LS controlled 3-way fl ow regulator
RE 18300-09
Edition: 02.2016
Replaces: 07.2012TE-10-__-
Description
The inlet elements TE-10-__ are employed to connect the
external P, T lines to the P, T channels inside the ED
elements of the Directional Valve Assembly and to connect to
the LS ports of the ED elements equipped with LS channels.
The LS signal is sent downstream of the proportional fl ow
restrictor VEP: it provides a proportional pressure
compensated fl ow, across the VEP, for the ED elements of
the Directional Valve Assembly, and it unloads the excess
fl ow. The main functions are: to limit the maximum primary
pressure in the P line and to supply proportional pressure
compensated fl ow the ED elements of the Directional Valve
Assembly. TE-10-__ inlet elements are available with body
made of Black Anodized Aluminium (Al).
P and T Port sizes can be G 3/8, G 1/2, or SAE 8. Test point
M is G 1/4 on BSPP versions, and SAE 4 in SAE versions.
Technical data
General
TE-10-02-00- kg (lbs) 0.83 (1.83)
TE-10-03-00- kg (lbs) 0.88 (1.94)
TE-10-56-00- kg (lbs) 0.88 (1.94)
TE-10-02-S_- kg (lbs) 1.08 (2.37)
TE-10-03-S_- kg (lbs) 1.16 (2.57)
TE-10-56-S_- kg (lbs) 1.16 (2.57)
Max rated fl ow at P1
TE-10-02-00- l/min (gpm) 0-12 (0-3.1)
TE-10-03-00- l/min (gpm) 0-32 (0-8.4)
TE-10-56-00- l/min (gpm) 0-32 (0-8.4)
TE-10-02-S_- l/min (gpm) 0-12 (0-3.1)
TE-10-03-S_- l/min (gpm) 0-32 (0-8.4)
TE-10-56-S_- l/min (gpm) 0-32 (0-8.4)
Ambient Temperature °C (°F) –20....+50 (-4....+122)
(NBR seals)
Hydraulic
Maximum pressure bar (psi) 210 (3045)
Maximum inlet fl ow l/min (gpm) 40 (10.6)
Rated fl ow at P1 l/min (gpm) 32 (8.45)
Hydraulic fl uid
General properties: it must have
physical lubricating and chemical
properties suitable for use in
hydraulic systems such as, for
example:
Mineral oil based hydraulic
fl uids HL (DIN 51524 part 1).
Mineral oil based hydraulic
fl uids HLP (DIN 51524 part 2).
For use of environmentally
acceptable fl uids
(vegetable or polyglycol
base) please consult us.
Fluid Temperature °C (°F) –20....+80 (-4....+176) (NBR)
Permissible degree of
fl uid contamination
ISO 4572: β
x
≥75 X=10...12
ISO 4406: class 19/17/14
NAS 1638: class 8
Viscosity range mm
2
/s 20....380
Note
For applications with different specifi cations consult us