1/2
VUL1 0T.U4.01.00 - Y - Z
Insert type
Check, ball type
When pressure at 1 rises above the spring bias pressure, the poppet is lifted and
flow allowed from 1 to 2. The valve is closed (checked) from 2 to 1. Precision
machining allow virtually leak-free performance in the checked condition. These
valves have to be mounted as indicated.
Technical data
Description
Performance
RE 18329-60/10.10
Max. operating pressure bar (psi) 210 (3000)
Max. flow l/min. (gpm)
see “performance” graph
Max. internal
leakage
drops/min. 5
Fluid temperature range °C (°F) -30 to 100 (-22 to 212)
Installation torque Nm (ft-lbs) see “Dimensions” table
Weight kg (lbs) see “Dimensions” table
Special cavity see “Dimensions”
Seal kit (*)
code
material no.
see “Dimensions” table
Fluids
Mineral-based or synthetics with
lubricating properties at viscosities of
5 to 800 mm
2
/s (cSt)
Filtration
Nominal value max. 10µm (NAS 8)
ISO 4406 19/17/14
Other Technical Data See data sheet RE 18350-50
(*) Only external seals for 10 valves
2/2 Bosch Rexroth Oil Control S.p.A.
0TU40100YZ RE 18329-60/10.10
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
Bosch Rexroth Oil Control S.p.A.
Via Leonardo da Vinci 5
P.O. Box no. 5
41015 Nonantola – Modena, Italy
Tel. +39 059 887 611
Fax +39 059 547 848
cartridges@oilcontrol.com
www.boschrexroth.com
Dimensions
Ordering code
Insert type - Check, ball type
Series 0/A to L
unchanged performances and dimensions
Port sizes
= 09 G 1/4
= 02 G 3/8
= 03 G 1/2
= 04 G 3/4
G A B C D E Hex 1 Hex 2
O-Ring
dimensions
Seal kit H
Weight
kg (lbs)
Inst. torque
Nm (ft-lbs)
Flow max.
l/min. (gpm)
G 1/4
17
(0.67)
5.5
(0.21)
6
(0.24)
7
(0.28)
11.3
(0.44)
3
(0.12)
3
(0.12)
Ø 9x1
(0.35x0.04)
RG09UL010000100
R931002474
3
(0.12)
0.02
(0.04)
6 (4) 15 (4)
G 3/8
18.5
(0.73)
5.5
(0.21)
7.5
(0.3)
9
(0.35)
14.8
(0.58)
4
(0.16)
3
(0.12)
Ø 10.8x1.78
(0.43x0.07)
RG02UL010000100
R931002475
3
(0.12)
0.03
(0.06)
6 (4) 30 (8)
G 1/2
22.5
(0.89)
6.5
(0.26)
9.5
(0.37)
12
(0.47)
18.5
(0.73)
6
(0.24)
5
(0.2)
Ø 14x1.78
(0.55x0.07)
RG03UL010000100
R931002476
4
(0.16)
0.04
(0.08)
10 (7) 50 (13)
G 3/4
28.5
(1.12)
7
(0.28)
14.5
(0.57)
17
(0.67)
24.1
(0.95)
8
(0.3)
8
(0.3)
Ø 18.7x2.6
(0.74x0.1)
RG04UL010000100
R931002477
5
(0.2)
0.07
(2.2)
20 (15) 80 (21)
0T.U4.01.00 Y Z *
Type Material number
0TU401000900000 R931002417
0TU401000200000 R931002418
0TU401000300000 R931002419
0TU401000400000 R931002420
Type Material number
CRACKING PRESSURE bar (psi)
G 1/4 G 3/8 G 1/2 G 3/4
00
2.3
(33.4)
1.75
(25.4)
1.75
(25.4)
0.3
(4.4)
