RE 18316-36/10.09
1/2
VU-MF (G1/2 - G3/4) 04.31.17.00-Y-Z
Check valves
Poppet type with male-female threaded sleeve
Technical data
Description
Performance
Ports
Pressure
P max
bar (psi)
Flow
Q max
l/min (gpm)
Weight
kg (lbs)
G 1/2 350 (5000) 60 (16) 0.30 (0.66)
G 3/4 350 (5000) 130 (34) 0.44 (0.97)
Steel body, zinc plated
Flow is always allowed to pass from A to B when pressure
at A rises above the spring bias pressure and the poppet
is pushed from the seat. The valve is normally closed
(checked) from B to A. Precision machining and hardening
processes allow virtually leak free performance in the
checked condition.
Δp curves vs. flow in “A-B” free flow direction
For cracking pressure range refer to the specific table.
Bosch Rexroth Oil Control S.p.A.
Fimma Division (Rge 2)
Via G. Bovio, 7 Z.I. Mancasale
42124 Reggio Emilia, Italy
Tel. +39 0522 517 277
Fax +39 0522 517 125
cartridges@oilcontrol.com
www.boschrexroth.com
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
Type Material number
043117000301000 R930000444
043117000401000 R930000445
Type Material number Type Material number
2/2 Bosch Rexroth Oil Control S.p.A.
04311700YZ RE 18316-36/10.09
04.31.17.00 Y Z
Dimensions
Ordering code
Poppet type with male-
female threaded sleeve
Springs see table “Z”
Ports size / Dimensions see table “Y”
Springs
Z
Cracking presure Ordering code Ordering code
bar psi
Y=03 Y=04
01 8 116 03.51.01.428 03.51.01.450
Y
Ports
A - B
L
mm
(inches)
I
mm
(inches)
Hex
mm
(inches)
03
G 1/2 57 (2.24) 14 (0.55) 30 (1.18)
04
G 3/4 69 (2.72) 16 (0.63) 36 (1.42)
Ports size / Dimensions
Advantages
-Very compact design and inline mounting for space saving.
-Four sizes (see also next page) provide great adaptability to
the system.
-Mounting position is unrestricted.
-Very low Δp in the free flow direction.
