Solenoid Free to Rotate
Through 360º
316L Stainless Steel Solenoid
Enclosure and Valve
NACE MR-01-75 Internal Wetted
and Body Materials (Option)
Low Power
Arctic Service Options to -36ºC
Up to 690 bar Working Pressure
Worldwide Solenoid Approvals
Ex d, Ex ia, Ex emb and Explosion Proof
Compact Design
Seated Ball Design Offers Extremely
Low Leakage (Less Accumulation
Required, Smaller Pump Size & Duty)
ATEX
Registered
Solenoid Valve
&HUWLÀHGDV6,/&DSDEOH
Innovative and Reliable
Valve Solutions
www.bifold.co.uk
Global Presence for
Peace of Mind
Superior Performance Throughout the Full Operational Range
Direct Acting Solenoid Valves
Model FP01
(Up to 690 bar, 1 litre per minute)
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
)HDWXUHV%HQHÀWV
Solenoid Valve Range
2
Worldwide Approvals
Spacious Enclosure for Ease of Wiring
Widest Range of Override Options
Solenoid Operator is Free to Rotate 360º
Valve can be Mounted in any Orientation
Standard Solenoid Operator
Equipment Design & Build
Worldwide Approval
Solenoid operator is free to rotate 360º allowing for
an easy cable layout and ease of connection
wiring. Solenoid operator internals rotate with the
enclosure and prevent cables being pulled out of
terminal block.
Widest range of override options (Auto Reset,
Spring Return Manual Override, Stayput Manual
Override and Manual Reset.
:RUOGZLGHWHFKQLFDODQGÀHOGVXSSRUW
Standard solenoid valve can be mounted in any
orientation to simplify installation due to all the
components having enhanced rotational capabilities.
&RPPLVVLRQLQJDQG0DLQWHQDQFH%HQHÀWVIRU
the Standard Solenoid Valve
Tropicalised solenoid operator design - 316L
stainless steel enclosure; stainless steel or Remko B
magnetic parts (dependant upon solenoid Ex type)
Fully encapsulated coil.
Spacious solenoid enclosure for ease of wiring.
No time penalty for heat dissipation before
removing solenoid enclosure cover.
No special high temperature cable requirements.
Terminal Block
Surge Suppression
Diode Ex d (dc)
Internal Earth
Connection
ATEX
Registered
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
33
)HDWXUHV%HQHÀWV
Solenoid Valve Range
Simple Maintenance
State of the Art Testing
6,/&DSDELOLW\)0($([WHQVLYH4XDOLÀFDWLRQ7HVWLQJ
Coupled with 100% Computerised Diagnostic Test Procedures.
6DIHW\DQG(QYLURQPHQWDO%HQHÀWV
SIL 3 capability: The product has met manufacturer
design process requirements of Safety Integrity Level
(SIL) 3.
Force balanced valve design with high safety factors
to de-energise at all pressures in Normally Open and
1RUPDOO\&ORVHGFRQÀJXUDWLRQV
100% computerised diagnostic testing to ensure each
VROHQRLGYDOYHLVSURYHQDORQJZLWKFRQÀUPHGVDIHW\
factors.
%LIROGKDVVWDWHRIWKHDUWWHVWLQJDQGTXDOLÀFDWLRQ
equipment including endurance, environment, climatic,
performance, function and leakage testing.
The standard solenoid operator is a holding magnet
type which ensures the valve will operate in damp
conditions. The risk of corrosion to internal
components is reduced, unlike other valve types that
incorporate a solenoid core tube design with a
'wetted' armature that will only operate in dry air
conditions!
The standard solenoid valve has proven arctic
service and low temperature performance.
Products are manufactured, inspected, assembled and
tested in our state of the art production facilities.
Dry solenoid armature to prevent corrosion and
affecting safe shut down.
Simple maintenance - Removable transient suppression
diode on Ex d DC solenoid valve assemblies and
removable solenoid coil without removing valve from
the tubing.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
FP01 Solenoid Valve Range
4
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Preferred Range
Product
Schematic
Representation
Page
Number
Product Code
Product Description
13
13
13
13
DIRECT ACTING SOLENOID VALVES - PREFERRED RANGE
FP01
S1
FP01
S1
Manual Reset
FP01
S2
FP01
S2
Manual Reset
†
FP01/S1/M/32/NC/S/74AT4-24D/36
FP01/S2/M/32/NC/S/74AT4-24D/36
FP01/S1/M/32/NC/S/77A-24D/30
FP01/S2/M/32/NC/S/77A-24D/30
FP01/S1/M/32/NC/S/78A-155
FP01/S2/M/32/NC/S/78A-155
FP01/S1/M/32/NC/S/74AT4-24D/ML/36
FP01/S2/M/32/NC/S/74AT4-24D/ML/36
FP01/S1/M/32/NC/S/77A-24D/ML/30
FP01/S2/M/32/NC/S/77A-24D/ML/30
FP01/S1/M/32/NC/S/78A-155/ML
FP01/S2/M/32/NC/S/78A-155/ML
ATEX II 2 GD c, Ex emb IIC T4 Gb
ATEX II 2 GD c, Ex emb IIC T4 Gb
ATEX II 2 GD, Ex d IIC T6
ATEX II 2 GD, Ex d IIC T6
ATEX II I GD, Ex ia IIC T6 Ga
ATEX II I GD, Ex ia IIC T6 Ga
IECEx Ex emb IIC T4 Gb
IECEx Ex emb IIC T4 Gb
IECEx Ex d IIC T6
IECEx Ex d IIC T6
IECEx Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
3.6 Watt, Cv 0.01, 345 bar.
3.6 Watt, Cv 0.01, 517 bar.
3.0 Watt, Cv 0.01, 345 bar.
3.0 Watt, Cv 0.01, 517 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Auto Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Auto Reset.
3 way 2 position, direct acting, Normally
Closed, Auto Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Auto Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Auto Reset.
3 way 2 position, direct acting, Normally
Closed, Auto Reset.
ATEX II 2 GD c, Ex emb IIC T4 Gb
ATEX II 2 GD c, Ex emb IIC T4 Gb
3.6 Watt, Cv 0.01, 345 bar.
3.6 Watt, Cv 0.01, 517 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Manual Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Manual Reset.
3 way 2 position, direct acting, Normally
Closed, Manual Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Manual Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Manual Reset.
3 way 2 position, direct acting, Normally
Closed, Manual Reset.
ATEX II 2 GD, Ex d IIC T6
ATEX II 2 GD, Ex d IIC T6
IECEx Ex d IIC T6
IECEx Ex d IIC T6
3.0 Watt, Cv 0.01, 345 bar.
3.0 Watt, Cv 0.01, 517 bar.
†
†
†
ATEX II I GD, Ex ia IIC T6 Ga
ATEX II I GD, Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
155 Ohms, Cv 0.01, 345 bar.
155 Ohms, Cv 0.01, 517 bar.
155 Ohms, Cv 0.01, 345 bar.
155 Ohms, Cv 0.01, 517 bar.
IECEx Ex emb IIC T4 Gb
IECEx Ex emb IIC T4 Gb
† Solenoid must be used in conjunction with a correctly matched Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system.
VALVE LIMITS
1
2
3
VALVE LIMITS
1
2
3
VALVE LIMITS
1
2
3
VALVE LIMITS
1
2
3
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
FP01 Solenoid Valve Range
Preferred Range
5
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Product
Schematic
Representation
Page
Number
Product Code
Product Description
13
13
DIRECT ACTING SOLENOID VALVES - PREFERRED RANGE
FP01
S3
FP01
S3
Manual Reset
FP01/S3/M/32/NC/S/74AT4-24D/36
FP01/S3/M/32/NC/S/77A-24D/30
FP01/S3/M/32/NC/S/78A-155
FP01/S3/M/32/NC/S/74AT4-24D/ML/36
FP01/S3/M/32/NC/S/77A-24D/ML/30
FP01/S3/M/32/NC/S/78A-155/ML
ATEX II 2 GD c, Ex emb IIC T4 Gb
IECEx Ex emb IIC T4 Gb
3.6 Watt, Cv 0.01, 690 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Auto Reset.
ATEX II 2 GD, Ex d IIC T6
IECEx Ex d IIC T6
3.0 Watt, Cv 0.01, 690 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Auto Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Manual Reset.
ATEX II 2 GD, Ex d IIC T6
IECEx Ex d IIC T6
3.0 Watt, Cv 0.01, 690 bar.
†
ATEX II I GD, Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
3 way 2 position, direct acting, Normally
Closed, Auto Reset.
155 Ohms, Cv 0.01, 690 bar.
3 way 2 position, direct acting, Normally
Closed, Manual Reset.
†
ATEX II I GD, Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
155 Ohms, Cv 0.01, 690 bar.
ATEX II 2 GD c, Ex emb IIC T4 Gb
3.6 Watt, Cv 0.01, 690 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, Manual Reset.
IECEx Ex emb IIC T4 Gb
† Solenoid must be used in conjunction with a correctly matched Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system.
VALVE LIMITS
12
3
VALVE LIMITS
12
3
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
6
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Product
Schematic
Representation
Page
Number
Product Code
Product Description
14
14
DIRECT ACTING SOLENOID VALVES
FP01/S2/S2/M/32/NC/S/77A-24D/SB/30
FP01/S3/S3/M/32/NC/S/78A-155/SB
FP01/S2/S2/M/32/NC/S/77A-24D/SB/M/30
FP01/S3/S3/M/32/NC/S/78A-155/SB/M
ATEX II 2 GD, Ex d IIC T6
IECEx Ex d IIC T6
3.0 Watt, Cv 0.01, 517 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, pulse operated, bi-stable,
hydraulically latched, fail to close on loss of
pressure, Auto Reset.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, pulse operated, bi-stable,
hydraulically latched, fail to close on loss of
pressure. *Manual Override.
ATEX II 2 GD, Ex d IIC T6
IECEx Ex d IIC T6
3.0 Watt, Cv 0.01, 517 bar.
†
ATEX II I GD, Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
3 way 2 position, direct acting, Normally
Closed, pulse operated, bi-stable,
hydraulically latched, fail to close on loss
of pressure, Auto Reset.
155 Ohms, Cv 0.01, 690 bar.
3 way 2 position, direct acting, Normally
Closed, pulse operated, bi-stable,
hydraulically latched, fail to close on loss
of pressure. *Manual Override.
†
ATEX II I GD, Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
155 Ohms, Cv 0.01, 690 bar.
Other Products Within The FP01 Range
Solenoid Valves
FP01
S1 / S1, S2 / S2
& S3 / S3
FP01
S1 / S1, S2 / S2
& S3 / S3
Manual Override
Spring Return
FP01/S1/S1/M/32/NC/S/74AT4-24D/SB/36
FP01/S1/S1/M/32/NC/S/74AT4-24D/SB/M/36
ATEX II 2 GD c, Ex emb IIC T4 Gb
IECEx Ex emb IIC T4 Gb
3.6 Watt, Cv 0.01, 345 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, pulse operated, bi-stable,
hydraulically latched, fail to close on loss of
pressure, Auto Reset.
ATEX II 2 GD c, Ex emb IIC T4 Gb
3.6 Watt, Cv 0.01, 345 bar.
3 way 2 position, direct acting, Normally
Closed, 24Vdc, pulse operated, bi-stable,
hydraulically latched, fail to close on loss of
pressure. *Manual Override.
IECEx Ex emb IIC T4 Gb
† Solenoid must be used in conjunction with a correctly matched Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system.
* Manual Override Spring Return.
FP01 - S1 / S1, S2 / S2 & S3 / S3
For the complete S1 / S1, S2 / S2 & S3 / S3 range, please see the selection chart on Page 14.
12
3
VALVE LIMITS
12
3
VALVE LIMITS
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
Overview
7
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Materials of Construction
Technical Data
Product Options
Solenoid enclosure and valve manufactured from 316L stainless steel as standard.
Internal components are constructed from 316L stainless steel, AISI 440C, CA104 aluminium bronze and ceramic as standard.
Alternative materials are available for NACE MR-01-75 compliance.
Valve seals are supplied in Nitrile as standard. Alternative elastomers available for extreme conditions and to suite media.
Springs are manufactured from 316S42 stainless steel as standard.
Fasteners are metric A4 18 / 10 grade stainless steel; equivalent to 316L grade stainless steel.
Solenoid Valve Range
&HUWLÀFDWLRQ$SSURYDORSWLRQVDYDLODEOH
SIL 3 capability: The product has met manufacturer design process requirements of Safety Integrity Level (SIL) 3 in
accordance with IEC 61508.
Solenoid valve assemblies can be mounted in any orientation. Solenoid enclosure can be rotated relative to the pilot stage
valve body to suit cable entry.
Working pressure up to 690 bar. Maximum working pressure according to valve model.
2SHUDWLQJPHGLD0LQHUDORLOVZDWHUJO\FROPL[WXUHVVHDZDWHUÀOWHUHGDQGVRPHFKHPLFDOV
For operating temperature range, please see solenoid valve type and seal options.
Manual Reset & Manual Override operator options.
Arctic Service options to -36ºC.
ATEX
Registered
Operating Performance for FP01
Duty cycle 100% continuously rated / energised.
6XUJHVXSSUHVVLRQGLRGHLVÀWWHGRQDOO([GGFVROHQRLGFRLOVDVVWDQGDUG
Response times - pull in < 100ms, drop out < 70ms.
Solenoid Insulation - Class H.
Pull in volts to 90% of nominal. (checked at FAT to be within specified limits to guarantee safety factors).
Maximum volts at 110% of nominal.
IP66 & IP67 Ingress Protection to IEC 60529 and NEMA 4X for standard 7 series solenoid enclosures.
Bifold solenoid valves must be installed, operated and maintained in accordance with the relevant Bifold installation, operating
and maintenance instructions, relevant installation rules and codes of practice.
Flow Performance
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
6ROHQRLG&HUWLÀFDWLRQ$SSURYDOV
&HUWLÀFDWLRQ'HWDLOV
&HUWLÀFDWLRQ$SSURYDO'HWDLOV
Type 77 Solenoid
Type 74 Solenoid
Type 78 Solenoid
Type 77 Solenoid
Type 78 Solenoid
Type 77 Solenoid
Type 77 & 78 Solenoid
Type 78 Solenoid
Type 77 Solenoid
Type 77 Solenoid
IECEx, Certificate Number IECEx Bas 10.0008.
Ex d IIC T6 (Tamb -60ºC to +40ºC).
Ex d IIC T5 (Tamb -60ºC to +55ºC).
Ex d IIC T4 (Tamb -60ºC to +90ºC).
IECEx, Certificate Number IECEx Bas 09.0012X.
Ex emb IIC T4 Gb Tamb -25ºC to +50ºC.
Ex emb IIC T3 Gb Tamb -25ºC to +55ºC.
IECEx, Certificate Number IECEx Bas 09.0092X.
Ex ia IIC T6 Ga (Tamb = -60ºC to +60ºC).
Ex ia IIC T4 Ga (Tamb = -60ºC to +95ºC).
INMETRO, Certificate Number CEPEL-EX-097/2003X.
BR-Ex d IIC T6 -60ºC to +40ºC ambient.
BR-Ex d IIC T5 -60ºC to +55ºC ambient.
BR-Ex d IIC T4 -60ºC to +90ºC ambient.
ATEX, Certificate Number Baseefa 10ATEX0026.
II 2 GD Ex d IIC T6 (Tamb -60ºC to +40ºC).
II 2 GD Ex d IIC T5 (Tamb -60ºC to +55ºC).
II 2 GD Ex d IIC T4 (Tamb -60ºC to +90ºC).
ATEX, Certificate Number Baseefa 10ATEX0026.
II 2GD Ex d IIC T6 (Tamb -60ºC to +40ºC).
II 2GD Ex d IIC T5 (Tamb -60ºC to +55ºC).
II 2GD Ex d IIC T4 (Tamb -60ºC to +90ºC).
ATEX, Certificate Number Baseefa 09ATEX0040X.
II 2GD c Ex emb IIC T4 Gb Tamb -25ºC to +50ºC.
II 2GD c Ex emb IIC T3 Gb Tamb -25ºC to +55ºC.
ATEX, Certificate Number Baseefa 02ATEX0124X.
II I GD Ex ia IIC T6 Ga (Tamb = -60ºC to +60ºC).
II I GD Ex ia IIC T4 Ga (Tamb = -60ºC to +95ºC).
INMETRO, Certificate Number CEPEL-EX-532/05.
BR-Ex ia IIC T6 -60ºC to + 40ºC ambient.
BR-Ex ia IIC T4 -60ºC to + 95ºC ambient.
GOST, Certificate Number B00763, RTN.
Ex d IIC T6 -60ºC to +40ºC ambient.
Ex d IIC T5 -60ºC to +55ºC ambient.
Ex d IIC T4 -60ºC to +90ºC ambient.
GOST K, GGTN K Permit, Kazakhstan,
BIF 7727 2.
GOST, Certificate Number B00015, RTN.
Permit Number PPC 00-28504.
Ex ia IIC T6 -60ºC to +40ºC ambient.
Ex ia IIC T5 -60ºC to +55ºC ambient.
Ex ia IIC T4 -60ºC to +90ºC ambient.
CSA (US), Certificate Number 1398692.
Class 1, Division 1, Groups B, C & D for both
Canada & USA.
Ex d IIC for Canada, AEx d IIC for USA.
T85ºC -60ºC to +40ºC ambient.
T100ºC -60ºC to +55ºC ambient.
T135ºC -60ºC to +90ºC ambient.
Dual Labelled/Marked
Dual Labelled/Marked
Dual Labelled/Marked
Dual Labelled/Marked
For solenoid type 74, the maximum permissible ambient temperature is subject to the coil Wattage. Please see page 9.
Please note that operation ambients are dependent upon seal types.
Label Rationalisation
The temperature details on our solenoid valve labels have, to date,
been laid out with a single ambient range and 'T' rating, as follows :-
$7&7DPE&
or 77A6 - T5 &7DPE&
or 77A9 - T6 &7DPE&
These are in the process of being replaced with a single label which
covers all potential temperature parameters. Therefore the label
will for example, read as follows :-
7&7DPE&
T5 &7DPE&
T6 &7DPE&
77A
{
{
8
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
Solenoid Valve Product Options
Port Connections
Solenoid Coil Spare
Product Weights
Port Connections (FP01)
Solenoid Coil Spare Selection Chart - Ordering Example
Type 74 & 77
Approximate Standard Product Weights
For port connections, please refer to selection chart ordering example
on pages 13 & 14.
&RQÀJXUDWLRQ Pressure Service Vent
Normally Closed 1 2 3
Normally Open 3 2 1
Selector 1 & 3 2 N/A
Diverter 2 1 & 3 N/A
Product
Approximate Weight
(Excluding Sub-base)
(Kg)
S1, S2 & S3 2.5
S1 / S1, S2 / S2 & S3 / S3 5
109
109
Voltage
Coil Type
Coil Type
Power
74 Only
Resistance
†
Nominal Voltage
Ordering Example
Ordering Example
109
109
30 - EXM
155
24DC
12
XXX Voltage (V) 74 (Ex emb) 24 & 48 Vdc
EXM
XXX Nominal Voltage 78 (Ex ia) 12 V
XX Power (W) 74 (Ex emb) 1.8 & 3.6 Watts
Seal Repair Kit
77 (Ex d) 12, 24, 48 &110 Vdc
78 (Ex ia) 155 Ohms
77 (Ex d) 110 & 240 Vac
77 (Ex d) 1.5 & 3.0 Watts
PORT CONNECTIONS TABLE
PRODUCT WEIGHTS
For detailed information, please contact Bifold sales department.
Solenoid Coil Spare
Solenoid Coil Spare Selection Chart Ordering Example
Type 78
† Solenoid must be used in conjunction with a correctly matched Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system.
9
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
XX5HVLVWDQFH
Seal Repair Kit Selection Chart - Ordering Example
(FP01)
Model Code
Ordering Example
When ordering the seal repair kits, please ensure that the serial number of the
valve to be overhauled is submitted with the enquiry / order.
FP01
FP01-SX-M-32-NC-S-RK
S1 345 bar
S2 517 bar
S3 690 bar
RK Repair Kit
S1 / S1 345 bar
S2 / S2 517 bar
S3 / S3 690 bar
M Sub-base Mounting
NC Normally Closed
NO Normally Open
22 2-way, 2-position
32 3-way, 2-position
S Nitrile (standard)
V Viton
SA Nitrile (Low Temperature)
3 / 2 Only
SV Selector Valve
DV Diverter Valve
Connections
Maximum Valve
Pressure
Valve
&RQÀJXUDWLRQ
O-ring Material
Repair Kit
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
Ex emb Options
FP01 Solenoid Options
10
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Media #
-20ºC to +40ºC
-25ºC to +40ºC
-20ºC to +55ºC
-25ºC to +55ºC
Ambient
-25ºC to +55ºC (T3)
(Up to 3.0 W)
-25ºC to +50ºC (T4)
(Up to 4.0 W)
-25ºC to +40ºC (T3)
(3.0W - 6.8 W)
Media
#
-20ºC to +40ºC
-25ºC to +40ºC
-20ºC to +55ºC
-25ºC to +55ºC
Ambient
-25ºC to +55ºC (T3)
(Up to 3.0 W)
-25ºC to +50ºC (T4)
(Up to 4.0 W)
-25ºC to +40ºC (T3)
(3.0 W - 6.8 W)
IP66
IP67
NEMA 4X
IP66
IP67
NEMA 4X
M20 x 1.5
(½" NPT
Option)
M20 x 1.5
(½" NPT
Option)
Product
Ty p e
Solenoid
Order
Code
Typical
Apparatus
Code
Ingress
Protection
Cable
Entry
Connection
&HUWLÀFDWLRQ2SWLRQV
74
1.8
3.6
0.01
74
1.8
3.6
0.01
ATEX IECEx
ATEX IECEx
Options Table 1 74 (Ex emb)
)RUGHWDLOHGLQIRUPDWLRQRQFHUWLÀFDWLRQSOHDVHVHHSDJH
Other Wattages available upon request.
# Permissible media operating temperatures are dependent upon the selected O-Ring material. Please refer to the product selection charts on pages 13 to 14.
Standard
Vo ltage
CV
Rate
Power
Consumption
(W)
Temperature
Range (ºC)
Ex emb IIC
T3 / T4
Ex emb IIC
T3 / T4
24 Vdc
48 Vdc
24 Vdc
48 Vdc
FP01 (S1)
FP01 (S2)
FP01 (S3)
FP01 (S1 / S1)
FP01 (S2 / S2)
FP01 (S3 / S3)
SOLENOID OPTIONS TABLE 1 74 (Ex emb)
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
Ex d Options
FP01 Solenoid Options
11
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
IP66
IP67
NEMA 4X
IP66
IP67
NEMA 4X
M20 x 1.5
(½" NPT
Option)
M20 x 1.5
(½" NPT
Option)
ATEX IECEx
INMETRO
GOST
CSA (C, US)
GOST K GGTN
ATEX IECEx
INMETRO
GOST
CSA (C, US)
GOST K GGTN
Product
Ty p e
Solenoid
Order
Code
Typical
Apparatus
Code
Ingress
Protection
Cable
Entry
Connection
&HUWLÀFDWLRQ2SWLRQV
77
1.5
3.0
0.01
77
1.5
3.0
0.01
)RUGHWDLOHGLQIRUPDWLRQRQFHUWLÀFDWLRQSOHDVHVHHSDJH
Other Wattages available upon request.
# Permissible media operating temperatures are dependent upon the selected O-Ring material. Please refer to the product selection charts on pages 13 to 14.
Options Table 2 77 (Ex d)
FP01 (S1)
FP01 (S2)
FP01 (S3)
FP01 (S1 / S1)
FP01 (S2 / S2)
FP01 (S3 / S3)
Standard
Vo ltage
CV
Rate
Power
Consumption
(W)
Temperature
Range (ºC)
Ex d IIC
T6, T5
or T4
Ex d IIC
T6, T5
or T4
12 Vdc
24 Vdc
48 Vdc
110 Vdc
12 Vdc
24 Vdc
48 Vdc
110 Vdc
110 Vac
240 Vac
50 or 60 Hz
110 Vac
240 Vac
50 or 60 Hz
Media
#
-20ºC to +90ºC (T4)
-60ºC to +90ºC (T4)
Ambient
-60ºC to +40ºC (T6)
-60ºC to +55ºC (T5)
-60ºC to +90ºC (T4)
Media
#
-20ºC to +90ºC (T4)
-60ºC to +90ºC (T4)
Ambient
-60ºC to +40ºC (T6)
-60ºC to +55ºC (T5)
-60ºC to +90ºC (T4)
SOLENOID OPTIONS TABLE 2 77 (Ex d)
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
FP01 Solenoid Options
Ex ia Options
12
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Options Table 3 78 (Ex ia)
)RUGHWDLOHGLQIRUPDWLRQRQFHUWLÀFDWLRQSOHDVHVHHSDJH
† Solenoid must be used in conjunction with a correctly matched Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system.
# Permissible media operating temperatures are dependent upon the selected O-Ring material. Please refer to the product selection charts on pages 13 to 14.
Product
Ty p e
Typical
Apparatus
Code
Ingress
Protection
Cable Entry
Connection
&HUWLÀFDWLRQ2SWLRQV
78 †
0.01
0.01
Ex ia IIC
T6 or T4
Ex ia IIC
T6 or T4
78 †
IP66
IP67
NEMA 4X
IP66
IP67
NEMA 4X
M20 x 1.5
(½" NPT
Option)
M20 x 1.5
(½" NPT
Option)
Temperature
Range
Solenoid
Order
Code
CV
Rate
Media
#
-20ºC to +95ºC
-60ºC to +95ºC
Ambient
-60ºC to +60ºC (T6)
-60ºC to +95ºC (T4)
Media
#
-20ºC to +95ºC
-60ºC to +95ºC
Ambient
-60ºC to +60ºC (T6)
-60ºC to +95ºC (T4)
SOLENOID OPTIONS TABLE 3 78 (Ex ia)
GOST K GGTN
INMETRO
ATEX IECEx
GOST
GOST K GGTN
INMETRO
ATEX IECEx
GOST
FP01 (S1)
FP01 (S2)
FP01 (S3)
FP01 (S2 / S2)
FP01 (S3 / S3)
FP01 (S1 / S1)
Safety Parameters: Type 78
Ui = 31 V, Ii = 210 mA, Pi = 1.5 W, Ci = 0 μF, Li = 0 mH
Coil Resistance : 155 Ohm ± 5%
Minimum Current @ solenoid coil = 80 mA
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
FP01 - S1, S2 & S3 Selection Chart
FP01 (S1, S2 & S3)
13
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Dimensional Drawing
FP01 Selection Chart - Ordering Example
FP01
Model Code
Connections
Maximum Valve
Pressure
9DOYH&RQÀJXUDWLRQ
O-ring Material
Solenoid Approval
Voltage
Ex emb 'T' Option
Solenoid
Option
Option
Sub-Base Options
Options
Power
Resistance
†
Ordering Example
XX Refer to solenoid options tables.
XXX Voltage, refer to
Solenoid option
tables.
XX5HVLVWDQFH
S1 345 bar
S2 517 bar
S3 690 bar
FP01 / S1 / M/32 / NC / 74 A T4-24D / ML/ K85 / H2S /S /
36 /
M Sub-base Mounting
Direct acting, spring return
NC Normally Closed
NO Normally Open
22 2-way, 2-position (effected by omitting / plugging one port in the sub-base)
32 3-way, 2-position
S Nitrile (standard)
V Viton
SA Nitrile (Low Temperature)
XX Power (W)
78 (Ex ia)
74 (Ex emb) Page 10 - Table 1
74 (Ex emb) Page 10 - Table 1
77 (Ex d)
77 (Ex d) Page 11 - Table 2
77 (Ex d) Page 11 - Table 2
78 (Ex ia) Page 12 - Table 3
74 (Ex emb)
K85 ½" NPT cable entry
T4 Class ≤ 4.0 W (50ºC maximum ambient temperature)
M Electrical to switch or temporary manual override
ML Electrical and manual required
MOR Electrical to switch or stayput manual override
For maximum operating temperatures
see 'T' Rating Limitations for Ex emb,
Ex d & Ex ia on pages 10, 11 & 12.
3 / 2 Only
SV Selector Valve
DV Diverter Valve
(-30ºC to +130ºC)
(-20ºC to +180ºC)
(-36ºC to +180ºC)
A $7(;,(&(['XDO&HUWLÀHG/DEHOOHG
G GOST
I INMETRO
U CSA (US) ATEX Dual Certified/Labelled
74(Ex emb) 77(Ex d) 78(Ex ia)
x
x
xx
999
9
9
9
9
9
H2S NACE MR-01-75 compliant internal wetted
and body materials
FACTORY SET
ADJUSTEMENT
M20 x 1.5P
CABLE ENTRY
PUSH TO
RESET OR
OVERRIDE
(OPTION)
3
2
1
1
23
VALVE SHOWN AS
NORMALLY CLOSED
REQUIRED FIXING HOLES
M6 x 1P x 10 DP
2 PLACES
55,5
20,8
25,4
198
25
(M & ML)
50,8
14 24,5
22,5
9
167,5
EXTERNAL
EARTH
SOLENOID ENCLOSURE MAY BE
ROTATED THRO' 360 IF°
UNRESTRICTED
2 x S.H.C.S.
M6 x 40 LG
SUB-BASE
(OPTION)
For the shaded block sections, please refer to the same shaded sections on pages 10, 11 & 12.
† Solenoid must be used in conjunction with a correctly matched Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system.
The solenoid valve installation operating and maintenance instruction reference is OP0165.
VALVE LIMITS
SCHEMATIC 3/2 NC
1
2
3
Type 74 (Ex emb)
Type 77 (Ex d)
Voltage can be applied
in either direction
WINDING
CASE
SOLENOID
DC VOLTAGE
Wiring Diagrams
+
WINDING
CASE
SOLENOID
DC VOLTAGE
-
+
WINDING
CASE
SOLENOID
DC VOLTAGE
-
WINDING
CASE
SOLENOID
AC VOLTAGE
Type 78 (Ex ia)
Page 10 - Table 1
Page 11 - Table 2
- 1.8 & 3.6 Watts
- 1.5 & 3.0 Watts
- 155 Ohms Page 12 - Table 3
[M221]
M221 ¼" NPT
M437 ¼" BSPP
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
FP01 - S1 / S1, S2 / S2 & S3 / S3 Selection Chart
FP01 (S1 / S1, S2 / S2 & S3 / S3)
Dimensional Drawing
EXTERNAL
EARTH
31
25 178 147 25
31
375
20,8
EXTERNAL
EARTH
REQUIRED FIXING HOLES
M6 x 1P x 10DP
2 PLACES
SOLENOID ENCLOSURE MAY BE
ROTATED THRO' 360°
IF UNRESTRICTED
SUB-BASE
(OPTION)
M20 x 1.5P
CABLE ENTRY
M20 x 1.5P
CABLE ENTRY
2 x S.H.C.S.
M6 x 40 LG
(M & ML)(M & ML)
3
2
1
1
23
50,8
14 24,5
22,5
9
VALVE SHOWN AS
NORMALLY CLOSED
PUSH TO
RESET OR
OVERRIDE
(OPTION)
1
2
3
14
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
FP01 Selection Chart - Ordering Example
FP01
Model Code
Connections
Maximum Valve
Pressure
9DOYH&RQÀJXUDWLRQ
O-ring Material
Solenoid Approval
Voltage
Solenoid
Option
Option
Default Position
Options
Resistance †
Power
Ordering Example
XX Refer to solenoid options tables.
XXX Voltage, refer to
Solenoid option
tables.
XX5HVLVWDQFH
S1 / S1 345 bar
S2 / S2 517 bar
S3 / S3 690 bar
FP01/ S1/S1 M// 32/NC/ 74 A T4- M / K85 / HS2 / [M221]S / 24D/ SB / 36 /
M Sub-base
Mounting
Pulse operated, hydraulically latched, spring bias to close on loss of pressure
NC Normally Closed
32 3-way, 2-position
S Nitrile (standard)
V Viton
SA Nitrile (Low Temperature)
XX Power (W)
78 (Ex ia) - 155 Ohms Page 12 - Table 3
74 (Ex emb) Page 10 - Table 1
74 (Ex emb) Page 10 - Table 1
77 (Ex d)
77 (Ex d) Page 11 - Table 2
77 (Ex d) Page 11 - Table 2
78 (Ex ia) Page 12 - Table 3
74 (Ex emb)
K85 ½" NPT cable entry
SB Spring bias to close on loss of hydraulic supply pressure
M Electrical to switch or temporary manual override
ML Electrical and manual required
MOR Electrical to switch or stayput manual override
For maximum operating temperatures
see 'T' Rating Limitations for Ex emb,
Ex d & Ex ia on pages 10, 11 & 12.
(-30ºC to +130ºC)
(-20ºC to +180ºC)
(-36ºC to +180ºC)
A $7(;,(&(['XDO&HUWLÀHG/DEHOOHG
G GOST
I INMETRO
U CSA (US) ATEX Dual Certified/Labelled
74(Ex emb) 77(Ex d) 78(Ex ia)
x
x
xx
999
9
9
9
9
9
For the shaded block sections, please refer to the same shaded sections on pages 10, 11 & 12.
† Solenoid must be used in conjunction with a correctly matched Intrinsically Safe (IS) solenoid driver. The valve installer is responsible for a correct and safe IS system.
The solenoid valve installation operating and maintenance instruction reference is OP0165.
Ex emb 'T' Option
T4 Class ≤ 4.0 W (50ºC maximum ambient temperature)
Sub-Base Options
M221 ¼" NPT
M437 ¼" BSPP
H2S NACE MR-01-75 compliant internal wetted
and body materials
Type 74 (Ex emb)
Type 77 (Ex d)
Voltage can be applied
in either direction
WINDING
CASE
SOLENOID
DC VOLTAGE
Wiring Diagrams
+
WINDING
CASE
SOLENOID
DC VOLTAGE
-
+
WINDING
CASE
SOLENOID
DC VOLTAGE
-
WINDING
CASE
SOLENOID
AC VOLTAGE
Type 78 (Ex ia)
VALVE LIMITS
SCHEMATIC 3/2 NC
1
2
3
Page 10 - Table 1
Page 11 - Table 2
- 1.8 & 3.6 Watts
- 1.5 & 3.0 Watts
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
Sub-Base Manifold
&RQÀJXUDWLRQV
Interface Details
15
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
Bifold Supplied Sub-Base Detail
Interface Detail
( For Customer Designed Sub-Base)
123
FILTER
FILTER FILTER
321
3
2
1
1
2
2 x S.H.C.S.
M6 x 40 LG
3
50.830.1
14 24.5
22.5
9
47.1
M6 x 1P THREAD
MIN 10 DP - 2 PLACES
FLUID PORTS
Ø2 MAX - 3 PLACES
LOCATING DOWEL HOLES
Ø3,18 - 2 PLACES
2
1 / 31 / 3
18
11,2 11,2
20,8
10,410,4
123
FILTER
32
FILTER
1
3-Way, 2-Position Normally Closed
(For 2-Way Valve Port 3 Must Be Plugged)
3-Way Diverter
(For S1,S2 & S3 only)
3-Way Selector
(For S1,S2 & S3 only)
3-Way, 2-Position Normally Open
(For 2-Way Valve Port 1 Must Be Plugged)
Surface Finish Requirements
NORMALLY
OPEN
3
1
2
DIVERTER
3
1
2
SELECTOR
3
1
2
NORMALLY
CLOSED
3
1
2
r
0,02/100
Rz 3.2 μm (max)
Valve Manifold Mounting - Surface Finish Requirements: -
(applicable to full extent of valve/manifold interface)
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
Accessory Information
Options
16
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
The range of products displayed in this brochure, are designed to accommodate all the options shown below. If the style
or arrangement required for your application is not shown, please contact our office with full description and specification
details.
The solenoid valve switches on and off with the electrical
supply. The manual override button can be pressed to
operate the valve when the solenoid is in the electrically
de-energised position. The manual override is
non-detented, i.e. does not latch in position. When the
button is released, the valve spring returns.
The solenoid valve switches on and off with the electrical
supply. The manual override button is rotated through ¾
turn to operate the valve when the solenoid is in the
electrically de-energised position. The manual override is
detented, i.e. remains in position until rotated back to its
original position when the valve spring returns.
Apply the electrical signal and press the reset button. The valve moves to the energised position and will not de-energise
until the electrical supply is removed. The manual reset is non-detented, spring return, i.e. does not latch in position. The
valve cannot be moved to the energised position by pressing the button if there is no electrical supply to the solenoid.
Type M - Electrical to Switch or Temporary
Manual Override (Spring Return)
Type MOR - Electrical to Switch or Temporary
Manual Rotary Override (Stayput)
Type ML - Electrical and Manual Required to Latch
Product Options
Manual Override Type M Manual Rotary Override Type MOR
Manual Reset Type ML
is a member of the
of companies
www.bifold.co.uk
BFD87 November‘13
© Bifold 2013
Typical Assembly Information
Typical Assemblies
17
VALVE LIMITS
VALVE LIMITS
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please
refer to the product catalogue issue list on our web site or
contact a member of our sales team.
When selecting a product, the applicable operating system
design must be considered to ensure safe use. The products
function, material compatibility, adequate ratings, correct
installation, operation and maintenance are the
responsibilities of the system designer and user.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme to ensure that every product will give optimum
SHUIRUPDQFHDQGUHOLDELOLW\:HDUHWKLUGSDUW\FHUWLÀHGWR
%6(1,62)XQFWLRQDOWHVWFHUWLÀFDWHOHWWHURI
FRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOOFHUWLÀFDWHVSURYLGLQJ
total traceability are available on request, to BS EN 10204 3.1
where available. We reserve the right to make changes
WRWKHVSHFLÀFDWLRQVDQGGHVLJQHWFZLWKRXWSULRUQRWLFH
V
AL
V
E LIMITS
V
AL
V
E LIMITS
P2
T2
T1
P1
P3
S1
S2
S3
B
BA
T
P
SOL 'X'
SOL 'Z'
Typical Valve Assembly Showing FP01 Solenoid Valves - Manual Reset
Typical Valve Assembly Showing FP01 Solenoid Valves
Schematic
Schematic
Marshalsea Hydraulics Limited
Marshalsea House, Venture Way
Priorswood Industrial Estate
Taunton, Somerset, TA2 8DE. UK.
Tel: +44 (0) 1823 331081
Fax: +44 (0) 1823 323382
Email: info@marshalsea.co.uk
Web: www.bifold.co.uk
Bifold, Bifold Fluidpower, Bifold Subsea
and Marshalsea Hydraulics Ltd
are all members of the Bifold Group.
Registered No. 1787729 in England.
5HJLVWHUHG2IÀFH*UHHQVLGH:D\
Middleton, Manchester, M24 ISW.
86$2IÀFH
Bifold Fluidpower Ltd
11490 Westheimer,
Suite 850,
Houston, TX, 77077.
Tel: +1 (713) 783 4253
Fax: +1 (713) 783 0067
Email: marketing@bifold.co.uk
Web: www.bifold.co.uk
8.2IÀFH
Bifold Fluidpower Ltd
Greenside Way,
Middleton, Manchester,
M24 ISW. UK.
Tel: +44 (0) 161 345 4777
Fax: +44 (0) 161 345 4780
Email: marketing@bifold.co.uk
Web: www.bifold.co.uk
6LQJDSRUH2IÀFH
Bifold Fluidpower Ltd
Toa Payoh Industrial Park,
Lorong 8 #07-1475,
Singapore, 3109075.
Tel: +65 6735 1323
Fax: +65 6735 1367
Email: marketing@bifold.co.uk
Web: www.bifold.co.uk
Innovative and Reliable
Valve Solutions
www.bifold.co.uk
Instrument, Process,
Directional Control Valves,
and Pumps
3QHXPDWLFDQG
,QVWUXPHQWDWLRQ9DOYHV
+\GUDXOLF9DOYHV
6XEVHD9DOYHV
+\GUDXOLF3XPSV
,QWHQVLILHUVDQG9DOYHV
Accuracy of Information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated so to
ensure accurate and up-to-date information please refer to
the product catalogue issue list on our web site or contact
a member of our sales team.
Quality Assurance
All Bifold products are manufactured to a most stringent
QA programme. Every care is taken at all stages of
manufacture to ensure that every product will give
optimum performance and reliability. We are third
SDUW\FHUWLÀHGWR%6(1,62)XQFWLRQDOWHVW
FHUWLÀFDWHOHWWHURIFRQIRUPLW\DQGFRSLHVRIRULJLQDOPLOO
FHUWLÀFDWHVSURYLGLQJWRWDOWUDFHDELOLW\DUHDYDLODEOHRQ
UHTXHVWWR%6(1ZKHUHDYDLODEOH:HUHVHUYH
WKHULJKWWRPDNHFKDQJHVWRWKHVSHFLÀFDWLRQVDQG
design etc., without prior notice.
When selecting a product, the applicable operating
system design must be considered to ensure safe use.
The products function, material compatibility, adequate
ratings, correct installation, operation, and maintenance
are the responsibilities of the system designer and user.
BFD87 November‘13 © Bifold 2013