8
OPERATING SPECIFICATIONS
Max. operating pressure ports P/A/B 350 bar
Max. pressure port T - for dynamic pressure see note (*) 250 bar
Nominal flow 8 / 15 / 25 / 40 l/min
Duty cycle Continuous 100% ED
Type of protection (depending on the connector used) IP 65
Flow rate gain See diagram
Power limits curves transmitted See diagram
Fluid viscosity 10 ÷ 500 mm
2
/s
Fluid temperature -20°C ÷ 75°C
Ambient temperature -20°C ÷ 70°C
Max. contamination level from class 7 at 9 in accordance
with NAS 1638 with filter ß
10
≥75
Weight XDP.3.A... (single solenoid) 1,7 Kg
Weight XDP.3.C... (double solenoid) 2,9 Kg
Max. current 2.35A 1.76 A 0.88 A
Solenoid coil resistance 25°C (77°F) 2.25 Ohm 4.0 Ohm 16.0 Ohm
Hysteresis P / A / B / T
with a pressure compensator AM.3.H.3V... ≤5 % <5% <8%
Response to step ∆p = 5 bar (P/A)
0 ÷ 100% 32 ms 40 ms 85 ms
100% ÷ 0 33 ms 33 ms 33 ms
Frequency response -3db (Input signal 50% ±25% Vmax)
22Hz 22Hz 12Hz
(*) Pressure dynamic allowed for 2 millions of cycles
Operating specifications are valid for fluids with 46 mm
2
/s viscosity at 40°C, using the
specified ARON electronic control units. Performance data carried out using the
specified Aron power amplifier SE.3.AN... serie 1 - EUROCARD format - powered
to 24V.
XDP.3.A... / XDP.3.C ... PROPORTIONAL DIRECTIONAL VALVES OPEN LOOP
AMPLIFIER UNIT AND CONTROL
REM.S.RA.*.*. and REM.D.RA.*.*.
Electronic card control single and double pro-
portional solenoid valve.
SE.3.AN.21.00...
Electronic card format EUROCARD for con-
trol and double proportional solenoid valve
AM.3.H.2V.P1 / AM.3.H.3V.P1
and AM.5.H.3V.P1 (*)
Hydrostats 2 or 3 way
(*) for rated flow XDP3 version at 40 l/min only
XDP.3.A...
BC.3.07
Standard subplate
CONFIGURATION FORDOUBLEFLOWRATE
OVERALL DIMENSIONS
Support plane
specifications
Fixing screws UNI 5931 M5x25
(min. 8.8 material screws are recommended)
Tightening torque 4 ÷ 5 Nm / 0.4 ÷ 0.5 Kgm
P1 Rotary emergency
P5 Rotary emergency 180°
"D15P" PROPORTIONAL SOLENOIDS
Type of protection (in relation to connector used) IP 66
Duty cycle 100% ED
Insulation class wire H
Weight (coil) 0,354 Kg
Weight (solenoid) 0,608 Kg
ETD15P - 01/2002/e