File: CDC3002_E 01/2010/eXI • 2

SETTORE

MOBILE

L 12V

M 24V

N 48V*

P 110V*

Z 102V*

X 205V*

W Without DC coils

* Special voltage

115Vac/50Hz

120Vac/60Hz

with rectifier

230Vac/50Hz

240Vac/60Hz

with rectifier

CDC Directional control

stackable valve

3 Size

* Body type (tab. 1)

E Electrical operator

** Spool (tab.2)

For series connection

use spool 04 only

* Mounting (tab.3)

* Voltage (tab.4)

** Variants (tab.5)

2 Serial No.

TAB.2 - STANDARD SPOOLS

TWO SOLENOIDS,SPRING CENTRED "C" MOUNTING

Spool Covering Transient position

type

01 +

02 -

03 +

04* -

ONE SOLENOID, SIDE A "E" MOUNTING

Spool Covering Transient position

type

01 +

02 -

03 +

04* -

15 -

16 +

ONE SOLENOID, SIDE B "F" MOUNTING

Spool Covering Transient position

type

01 +

02 -

03 +

04* -

15 -

16 +

Max. pressure ports P/A/B/T 250 bar

Max flow 30 l/min

Max excitation frequency 3 Hz

Duty cycle 100% ED

Fluid viscosity 10 ÷ 500 mm

Fluid temperature -25°C ÷ 75°C

Ambient temperature -25°C ÷ 60°C

Max contamination level class 10 in accordance

with NAS 1638 with filter ß

≥75

Weight with one DC solenoid 1,25 Kg

Weight with two DC solenoids 1,5 Kg

ORDERING CODE

For series connection

configuration, a special

individual stackable valve

CDC.3.*.E.04.**.3T.2 (A B or G

parallel body type only, with

spool 04 type, 3T variant) must

always be used as first element.

For other individual stackable valve

must use body D E or H connector

series type with spool 04 only.

CDC.3.*.E...

IRECTIONAL CONTROL STACKABLE VALVE

* SPOOL WITH PRICE INCREASING

CDC.3.*.E...

INDIVIDUAL VALVE CH. XI PAGE 3

STACKABLE VALVES CH. XI PAGE 4

"A09" DC COILS CH. XI PAGE 8

"LF" VARIANTS CH. XI PAGE 9

SCREWS AND STUDS CH. XI PAGE 10

STANDARD CONNECTORS CH. XI PAGE 25

TAB.3 MOUNTING

STANDARD

PECIALS (WITH PRICE INCREASING)

Directional control stackable valve body is available in two different sizes:

G3/8" or 9/16-18UNF (SAE 6).

The operation of the directional valve is electrical. The centring is achieved by means of

calibrated length springs which immediately reposition the spool in the neutral position when

the electrical signal is shut off. To improve the valve performance, different springs are used

for each spool.

The solenoids, constructed with a protection class of IP65 in accordance with BS 5490

standards, are available in direct current form and different voltage. The electrical controls are

equipped with an emergency manual control inserted in the tube.

The electrical supply connectors meet DIN 43650 ISO 4400 standards. On request, could be

available the following coil connec-

tion variants: AMP Junior connec-

tions; flying leads connections, with

or without integrated diode; Deutsch

connections with bidirectional inte-

grated diode.

The body valve is white zinc plated.

TAB.4 - A09 - DC VOLTAGE

• The AMP Junior coil and with the flying

leads (with or without diode) coils are avail-

able in 12V or 24V DC voltage only.

• The Deutsch coil with bidirectional diode

is available in 12V DC voltage only.

(*) P2 and R5 Emergency tightening torque

max. 6÷9 Nm / 0.6 ÷ 0.9 Kgm with CH n. 22

(**) It's suggest to order the variant without connectors. The

connectors must be order separately. See Ch. XI Page 25

TAB.1 - BODY TYPE

A Ports G3/8" parallel

B Ports 9/16 - 18UNF parallel

D* Ports G3/8" series

E* Ports 9/16 - 18UNF series

G Attachment style, parallel

presetting for modular valves

H* Attachment style, series

presetting for modular valves

L Ports G3/8" parallel - LS vers.

M Attachment style, parallel-LS vers.

presetting for modular valves

(*) For series connection configuration see note below

ordering code

TAB.5 - VARIANTS (**)

S1 No variant 00

SV Viton V1

ES Emergency button E1

P2(*) Rotary emergency button P1

R5(*)Rotary emergency button 180° P5

PT First elem. for series connec. PT

- Pilot light X1

- Rectifier R1

LF Emergency control lever LE

LR Emergency control lever 180° LG

- Pilot light + Rectifier XR

FL coils with flying leads (250 mm) FL

LD coils with flying leads (130 mm)

and integrated diode LD

AJ AMP Junior connection AJ

CX Deutsch connec. bidr.diode CX

Other variants relate to a special design

OD. VARIANT REPLACED CODE

File: CDC3002_E 01/2010/eXI • 3

SETTORE

MOBILE

P (bar)

Q (l/min)

129,5

N°4 fori

6,5

81,5

O-Ring 2-008

Only for LS versions

∆p (bar)

Q (l/min)

CDC.3.*.E... DIRECTIONAL CONTROL STACKABLE VALVE

OVERALL DIMENSIONS

E = Manual override

PRESSURE DROPS

DIRECTIONAL CONTROL STACKABLE VALVE

The diagram at the side shows

the pressure drop curves for

spools during normal usage.

The fluid used is a mineral oil with

a viscosity of 46 mm

/s at 40 C°;

the tests have been carried out at

a fluid temperature of 40 C°.

LIMITS OF USE (MOUNTING C-E-F)

The tests have been carried out with solenoids at operating temperature

and a voltage 10% less than rated voltage with a fluid temperature of 50

C°. The fluid used was a mineral oil with a viscosity of 46 mm

/s at 40

degrees C. The values in the diagram refer to tests carried out with the

oil flow in two directions simultaneously (e.g. from P to A and at the same

time B to T).

In the cases where valves 4/2 and 4/3 are used with the flow in one

direction only, the limits of use could have variations which may

even be negative (See curve No 4 and Spool No 16 used as 2 or 3

ways). The tests were carried out with a counter-pressure of 2 bar

at T port.

Spool n°

type

curve

01 1

02 1

03 3

04 2

15-16 1(4*)

(p*) Parallel connections

(s*) Series connections

Spool

Connections

type

P →A P →B A →T B →T P →T P/ T passing

01 4 4 4 4 / 9

02 (p*) 7 7 6 6 7 9

02 (s*) 7 7 6 6 8 /

03 4 4 6 6 / 9

04 (p*) 2 2 1 1 5 9

04 (s*) 2 2 1 1 3 /

15-16 F 6 6 5 10 / 9

15-16 E 6 6 10 5 / 9

Curve No.

(4*) = 15 and 16 spools used as 2 or 3 way, follow the curve n°4

Fittings, max. tightening torque 60 Nm

(*)

File: CDC3002_E 01/2010/eXI • 4

SETTORE

MOBILE

95,5

Ch./Hex. 10

STACKABLE DIRECTIONAL CONTROL VALVES

OVERALL DIMENSIONS

HYDRAULIC SYMBOLS AND INSTRUCTION OF CONNECTION

SERIES CONNECTION

PARALLEL CONNECTION

FE02-FE INLET MODULE FE 10 INLET MODULE

LENGTH LENGTH

NO. ELEMENTS

(mm)

D C

(mm)

2 192 180 202 190

3 238 226 248 236

4 284 272 294 282

5 330 318 340 328

6 376 364 386 374

For series connection configuration, a special individual valve

bank section (CDC.3.*.E.04.**.3T.2) must always be used as first

element (see ordering code)

Special element

CDC.3.*.E.04.**.3T.2

Special closing plug

Tighten the screws to a torque of 10 Nm