File: AM66003_E 01/2000/eIV • 18
4
AM.66.A AM.66.B
AM.66.AB
AM.66.P AM.66.PT*
AM.66.T
AM.66.A1 AM.66.B1
AM.66.A1B1
AM.66... MODULAR COMPENSATED
FLOW
CONTROL ASSEMBLY
CETOP 3
Max. operating pressure 320 bar
Hydraulic fluids Mineral oils DIN 51524
Fluid viscosity 10 ÷ 500 mm
2
/s
Fluid temperature -25°C ÷ 75°C
Ambient temperature -25°C ÷ 60°C
Max. contamination level class 10 in accordance
with NAS 1638 with filter ß
25
≥75
Weight 1,3 Kg
AM Modular valve
66 Size
** Control on lines
A / B / P / PT* / AB
For T / A1 / B1 / A1B1 versions
see table "Hydraulic symbols"
** 00 = No variant
V1 = Viton
3 Serial No.
PT * = From line towards exhaust (P
→ →
→ →
→ T drain)
• In order to obtain versions with regulation on T, the AM.66.P regulator carrying block
should be turned by 180°.
• In order to obtain versions A1, B1 and A1B1 the AM.66.A, AM.66.B or AM.66.AB
regulators carrying block should be turned by 180°.
ORDERING CODE
HYDRAULIC SYMBOLS
OVERALL DIMENSIONS
K = OR plate
Support plane
specifications
This is an intermediate block (AM.66)
for modular mounting of one or two
flow rate regulators type QC.3...
The flow regulator type QC.3.2...
must be ordered separately.
AM.66...
QC.3.2... CH. III PAGE 2
SCREWS AND STUDS CH. IV PAGE 21
