File: AM5V$003_E 01/2010/eIV • 24
4
AM.5.VM.A
AM.5.VM.B
AM.5.VM.AB
AM.5.VM.P
AM.5.VI.A
AM.5.VI.B
AM.5.VI.AB
P (bar)
Q (l/min)
3
2
1
P (bar)
Q (l/min)
3
2
1
AM.5.VM type pressure regulating
valves are available within operating
range 7 ÷ 350 bar. Adjustment is by
means of a grub screw or a plastic
knob. They are three basic versions:
AM.5.VM, on single A or B lines, and
on double A and B lines, with drainage
on T; AM.5.VM.P, on single P line,
with drainage on T; AM.5.VI, on sin-
gle A or B lines, and on double A and
B lines, with crossed drainage on ei-
ther A or B (see hydraulic symbols).
Three spring types can be fitted on all
versions, with calibrated ranges as
shown in the unit specifications.
Piloted operation cartridge type
CMP.30 is used on versions AM.5.VM
and AM.5.VM.P (see ordering code),
while on version AM.5.VI direct acting
cartridge type CMP.20 is used instead.
For the minimum permissible set-
ting pressure depending on the
spring, see the minimum pressure
setting curve.
ORDERING CODE
AM.5.VM... / AM.5.VI... MODULAR
MAX
. PRESSURE VALVES CETOP 5
Max. operating pressure 350 bar
Setting ranges: spring 1 50 bar
spring 2 140 bar
spring 3 350 bar
Max. flow 80 l/min
Hydraulic fluids Mineral oils DIN 51524
Fluid viscosity 10 ÷ 500 mm
2
/s
Fluid temperature -25°C ÷ 75°C
Ambient temperature -25°C ÷ 60°C
Max. contamination level class 10 in accordance
with NAS 1638 with filter ß
25
≥75
Weight AM.5.VM.A/B/P... 2,5 Kg
Weight AM.5.VM.AB... 2,7 Kg
Weight AM.5.VI.A/B... 5,7 Kg
Weight AM.5.VI.AB... 5,9 Kg
HYDRAULIC SYMBOLS
AM Modular valve
5 CETOP 5/NG10
** VM = Maximum pressure
VI = Maximum crossline relief
** Adjustment on the lines
AM.5.VM Version = A / B / P / AB
AM.5.VI Version = A / B / AB
* Type of adjustment
M = Plastic knob
C = Grub screw
* Setting ranges at port A/B/P
CMP 30 CMP 20
(AM.5.VM only) (AM.5.VI only)
1 = max. 50 bar 1 = max.50 bar (white spring)
2 = max. 140 bar 2 = max. 140 bar (yellow spring)
3 = max. 350 bar 3 = max. 250 bar (green spring)
* Setting ranges at port B
Omit if the setting is same as that at port A
CMP 30 CMP 20
(AM.5.VM only) (AM.5.VI only)
1 = max.50 bar 1 = max.50 bar (white spring)
2 = max. 140 bar 2 = max. 140 bar (yellow spring)
3 = max. 350 bar 3 = max. 250 bar (green spring)
** 00 = No variant
V1 = Viton
3 Serial No.
PRESSURE - FLOW RATE
FOR
CMP.30
MINIMUM SETTING PRESSURE
FOR
CMP.30
AM.5.VM... / AM.5.VI...
CMP.20... BFP CARTRIDGE CATALOGUE
CMP.30... BFP CARTRIDGE CATALOGUE
SCREWS AND STUDS CH. IV PAGE 35
File: AM5V$003_E 01/2010/eIV • 25
4
AM.5.VM.AB...
AM.5.VM.P...
AM.5.VI.AB...
OVERALL DIMENSIONS
AM.5.VM... / AM.5.VI...
MODULAR MAX. PRESSURE VALVES CETOP 5
Type of adjustment
M Plastic knob
C Grub screw
Type of adjustment
M Plastic knob
C Grub screw
Type of adjustment
M Plastic knob
C Grub screw
Support plane
specifications
Support plane
specifications
Support plane
specifications
