File: AD5RI003_E 01/2000/eI • 44
1
Q (l/min)
∆p (bar)
P
→→
→→
→ A
P
→ →
→ →
→ B
A
→ →
→ →
→ T
B
→ →
→ →
→ T
Max. operating pressure 320 bar
Max. pressure port T 160 bar
Min. recommended pressure 15 bar
Max. flow 70 l/min
Min. flow 6 l/min
Setting ranges: Spring 1 15 ÷ 50 bar
Spring 2 20 ÷ 140 bar
Spring 3 50 ÷ 320 bar
Fluid viscosity 10 ÷ 60 mm
2
/s
Fluid temperature -20°C ÷ 75°C
Max. contamination level class 10 in accordance
with NAS 1638 with filter ß
25
≥75
Weight 5,4 Kg
PRESSURE DROPS
HYDRAULIC SYMBOL
E = Manual override
AD.5.RI... AUTOMATIC RECIPROCATING
VALVES
CETOP 5
ORDERING CODE
Fixing screws UNI 5931 M6x40
with material specifications min. 8.8
Tightening torque 8 Nm / 0.8 Kgm
Support plane
specifications
This valve type is characterized by a
fully hydraulic operation, as it takes
advantage of the system pressure
rise to cause an automatic and con-
tinuous inversion of the utilization.
The changeover takes place when
the system pressure exceeds the
inversion valves calibration pressure,
and therefore also in not predeter-
mined position. At the cylinder stroke
end, the overall maximum pressure
valve should be adjusted on a value
30% higher than the system operat-
ing pressure.
The inverter valves pressure calibra-
tion values should be 15% lower than
that of the overall maximum pres-
sure valve, and 15% higher than the
maximum operating pressure.
Note: to operate the push button
emergency, a minimum pressure of
3 bar on the actuator is needed.
AD.5.RI...
AD Directional valve
5 CETOP 5/NG10
RI Automatic reciprocating valve
hydraulically operated
automatic reciprocation
211 Scheme
Z No voltage
* Setting ranges:
1 = 15 ÷ 50 bar
2 = 20 ÷ 140 bar
3 = 50 ÷ 320 bar
** 00 = No variant
V1 = Viton
3 Serial No.
