Switching function:

One single-pole micro switch (change-over switch)

The pressure increase closes contacts on terminalss 1 - 3 and opens

contacts on terminals 1 - 2

Ordering Code

Pressure switch consists of an aluminum housing,

a piston, a prestressed spring and a microswitch.

When the pressure corresponding with the spring setting

is reached, the switch closes or opens the respective

electric circuit.

The pressure switch is being supplied with a connector

and with two bolts.

When delivered with a sandwich plate, the switch can be

turned around its length axes by 90°.

The subplate can be ordered separately or with the

switch.

Functional Description

HU 9201

6/2005

Pressure Switch

TS2

MTS2

TS2 - -

Pressure switch

Pressure range

18 Adjustable pressure

73...2611 PSI (5 ... 180bar)

35 Adjustable pressure

725...5076 PSI (50...350 bar)

Piston sensing system with soft sealing

Leakage free

Mechanical service life 10 millions of switching

operations

Micro switches UL approved

Silver plated contacts in micro switch

Basic model for flange mounting

Type of subplate

0 without subplate

1 subplate type DP3-TS2-1 G1/4

3 subplate type DP3-TS2-3 SAE 6

max

to 5076 PSI (350 bar)

Replaces

HU 9201 1/2005

HU 9201

Technical Data

Switching pressure ranges PSI (bar) 73...2611 (5 ... 180) 725...5076 (50...350)

Switching pressure . . . . . at the range beginning

difference ca.

1) . . . . . . . .

at the range end

PSI (bar)

116 (8)

230 (16)

87 (6)

360 (25)

Limit value

PSI (bar) 3626 (250) 8702 (600)

Adjustable range (Falling pressure ) PSI (bar) 44...2321 (3 ... 160) 580...4351 (40 ... 300)

Adjustable range (Rising pressure ) PSI (bar) 73...2611 (5 ... 180) 725...5076 (50...350)

Max. Hysteresis (At the end of the range) % 15

Number of switching max. 1/min 60

Material of the housing Aluminium 230

Materials in the sensing element Stainless Steel, Turcon and NBR

Viscosity range SUS (mm

/s) up to 1000

Repeatability % ± 1 from range end value

Electrical connection plug connector to DIN 43 650

Switching element micro switch

Hydraulic fluid

Petroleum oils (HM, HL, HLP)

Phosphate ester fluids (HFD-R)

Ambient temperature range F (°C) -40 ... +176 (-40 ... +80)

Max. temperature at the switching element F (°C) +176 (+80)

Maximum degree of fluid contamination Class 21/18/15 to ISO 4406 (1999).

Max. vibration Lbs (g) 0,033 (15)

Mounting position optional

Weight Lbs (kg) 0.772 (0.35)

Operating data at 3.5 million switching operations.

Also short pressure peaks during the operation must not exceed this limit value.

Limit value corresponds with the max. testing pressure.

Related to pressure control at constant fluid and ambient conditions.

Enclosure type IP 65 (Connector DIN 43 650 A, Pg9 )

Voltage max. V 250 AC

Current max. A 5

Electric Data of the Microswitch

Silver plated contacts

Voltage Inductive endurance Resistance endurance

30 V 3,0 A 4,0 A

250 V 0,2 A 0,2 A

250 V~ 2,0 A 3,0 A

125 V~ 3,0 A 5,0 A

Minimum endurance 160 mA by 5 V DC

HU 9201

Pressure Switch Dimensions Dimensions in inches (millimetres )

Model TS2 - XX - 0

Model TS2 - XX - 1

Model TS2 - XX - 3

1a O-ring 8 x 1,5 - for adjustable pressure max 2611 PSI (180 bar) - supplied

witch each switch

1b O-ring 5 x 1,5 - for adjustable pressure max 5076 PSI (360 bar) - supplied

witch each switch

2 2 mounting bolts M5x60 (tightening torque 3.69 Ibf.ft (5 Nm)

supplied with each switch

3 Setting of the switch point (inside hexagon 5 mm)

HU 9201

Ordering Code of Sandwich Plates

Models of sandwich plates size 06



valve side

 subplate side

Models of sandwich plates size 10

MTS2 - /

Valve size of the sandwich plate

D 03 (06 mm)

D 05 (10 mm)

D 03 (06)

D 05 (10)

Sandwich plate of the pressure switch

Model

connection in port A

connection in port B

connections in ports A and B

connection in port P

HU 9201

1 Sandwich plate

2 Name plate

3 Damping orifice M4x

Æ0.4

4 Square ring 9.25 x 1.68 (4 purchase)

supplied with each plate

5 4 mounting holes

6 Mounting surface for TS

MTS2 - 06/C

Required surface finish of

interface

MTS2 - 10/C

1 Sandwich plate

2 Name plate

3 Damping orifice M4x

Æ0.4

4 Square ring 12.42 x 1.68 (5 purchase)

supplied with each plate

5 4 mounting holes

6 Mounting surface for TS

Required surface finish of

interface

Sandwich Plate Dimensions Dimensions in inches and (millimetres)

HU 9201



The plastic packaging is recyclable.



Certified documentation is available per request.

MTS2 - 06

MTS2 - 10

A, C B, P, C

Mounting Instructions for MTS2

Caution!

Subject to alteration without notice!

ARGO-HYTOS a. s. CZ - 543 15 Vrchlabí

Tel.: +420-499-403111, Fax: +420-499-403421

E-mail: sales.cz@argo-hytos.com