q
Screw-in cartridge design
q
5 pressure ranges
q
Pressure setting by
- Hexagon set screw lock
- Adjustable handknob
HA 5144
7/2012
7/8-14 UNF • p
max
350 bar (5076 PSI) • Q
max
60 L/min (15.85)GPM)
Pilot Operated Pressure
Reducing Valves
SP4A-B3
The pressure valves SP4A-B3 are pilot operated
screw-in cartridge pressure reducing valves designed as
3 way valves, i.e. with pressure protection of the secon-
dary circuit. The reducing valve consists of a body (1)
with thread 7/8-14 UNF, control spool (2), spring (3) and
the adjustment element (4). The flow from the primary
circuit flows to the first metering edge, where its pressure
is reduced. The reduced pressure corresponds with the
adjustment of the control spring of the ball pilot valve (5).
The reduced pressure is continuously controlled and
compared with the pressure preset. If any control error
appears, the respective control action takes place and
the reduced pressure returns to its preset value. If
pressure behind the valve increases due to the effect of
external load acting on the user, the control spool shifts
further against the spring, the reducing metering edge
closes and the second metering edge opens. The fluid
passes through the „third way“ to port T. The control flow
of the pilot valve (from the spring room) is also routed to
port T.
The valve body and the adjustment screw are zinc
coated.
Functional Description
Replaces
HA 5144 11/2008