1
q
Wide range of throttling oriffices
q
Two models:
- cartridge
- screw-in cartridge valve
The pressure compensated flow control valves VSK are
designed to control flow rates practically independent of
pressures and temperatures. The set up flow rate is
constant and depends on the orifice area. The 2-way
flow control valves can be used in meter-in, meter out or
bleed-off applications.
The valve consists of housing (1), throttling orifice (2),
pressure compensator (3), spring (4) and adjustment
screw (5).
Throttling in the direction A® B takes place on the
throttling area of the orifice (2). To provide for the
independence between flow rate and pressure, a
pressure compensator (3) with the metering edge (6) is
located behind the throttling orifice. The spring (4)
pushes the compensator to its extreme right position.
Provided that there is flow passing through the valve, the
input pressure acts on the face area of the pressure
compensator and shifts it to the left, thus reducing the
flow area of the metering edge (6) which results in
decreasing the pressure difference at the throttling
orifice. The movement of the compensator stops as
soon as the equilibrium is reached and the pressure
difference returns to its required value. The pressure
compensator continuously compares the pressure
difference at the orifice area (2) with the value preset by
the spring pretension and ensures the necessary
control, thus holding the flow rate constant. The flow rate
of the VSK2 can be adjusted in a small range by setting
the adjustment screw (5).
The flow rate in direction B® A is also given by the orifice
area (2), but the function of the pressure compensator is
excluded.
The function of the VSK4 is similar, but in this case, the
pressure compensator (3) is located in front of the
throttling orifice (2).
The housing of the VSK2 valve does not have any
surface treatment, the housing of the VSK4 is phosphate
coated. All the other parts are zinc coated.
VSK2
VSK4
Functional Description
VSK2
VSK4
HA 5121
6/2012
Replaces
HA 5121 5/2008
Size 06 · p
max
320 bar · Q
max
10 L/min
Constant Flow - Control Valves
VSK