1
Functional Description
P
T
Pressure relief valves VPP1 were designed for
applications requiring a safety valve or a pressure
regulating valve working over a wide range of pressures
and flow rates.
The valve basically consists of the valve body (1), pop-
pet with damping spool (2) and compression spring (3).
Pressure is manually set by an adjustment screw (4).
The spring pushes the poppet into the seat (5) holding
the valve in its normally closed position. When the force,
caused by the pressure acting on the exposed surface
area of the poppet, exceeds the spring force, the valve
opens and the flow passes from port P to port T. To
optimize the valve performance, five pressure ranges
are available. Choosing the closest range is
recommended. The design enables the valve to be used
as a screw-in cartridge for manifold mounting, built into
a threaded housing or in a subplate mounted housing.
Both the threaded and the subplate mounted housings
can be delivered either with metric or pipe threads.
The basic surface treatment of the valve body and the
adjustment screw are zinc coated.
HA 5061
7/2012
Replaces
HA 5061 9/2011
Size 06, 10 · p
max
320 bar · Q
max
120 L/min
Directly Operated Pressure Relief
Valves
VPP1
q
Screw-in cartridge, modular and in-line
design
q
Six pressure ranges
q
Four pressure adjustment options
q
Subplates - see catalogue HA 0002
2
HA 5061
Ordering Code
VPP1- - /
Nominal size
Size 06
Size 08 - only models M and G
Size 10
10
06
08
Adjustment option
Screw with internal hexagon
Adjustable handknob
Lockable cylindrical handknob
Non-lockable cylindrical handknob
S
R
O
Z
Direct Operated Relief Pressure
Valve
Model
V
M
G
P
screw-in cartridge valve
cartridge in threaded housing - with metric threads
cartridge in threaded housing - with BSP threads
cartridge in subplate mounted housing
Pressure range in bar
2,5
6,3
10
16
25
32
up to 320
up to 25
up to 63
up to 100
up to 160
up to 250
Seals
without designation NBR
Nominal size mm 06 10
Maximum flow L/min 50 120
Max. service pressure ports ( P, T, A, B ) bar 350
Working pressure related to flow bar see p-Q characteristics
Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524
Fluid temperature range
for standard sealing (NBR)
(°C) -30 ... +100
Viscosity range (mm
2
/s) 20 ... 400
Maximum degree of fluid contamination Class 21/18/15 to ISO 4406
Weight - screw-in cartridge valve
other models
kg
0,4
1,5
0,5
3,7
Mounting position unrestricted
Technical Data
3
HA 5061
p-Q Characteristics Measured at n = 32 mm
2
/s
Size 06
Flow Q [L/min]
Size 10
Pressure drop p [bar]
Flow Q [L/min]
Pressure drop p [bar]
4
HA 5061
Valve Dimensions Dimensions in imillimeters
Cartridge valve - model „V“
1 Screw adjustment model „S“ [inside HEX 5]
2 Adjustable handknob model „R“
3 Non-lockable cylindrical handknob model „O“
4 Lockable cylindrical handknob model „Z“
With all adjustmen mechanisms:
rotation = pressure decrease
rotation = pressure increase
5 Protective cap
6 Locknut HEX 16
7 Valve model code engraved
8 Wrench flats HEX 32
Tightening torque 80 Nm for Size 06
Wrench flats HEX 36
Tightening torque 140 Nm for Size 10
9 Distance to remove the key
10 Seal:
Size 06: Back-up ring M8-116 (1 pc.)
O-ring 20x2.65 NBR70 (1 pc.)
Size 10: Back-up ring BBP80-B121-N9 (1 pc.)
O-ring 26.64x2.62 NBR70 (1 pc.)
11 Seal:
Size 06: D 17.4x24x1.5-NSA (1 pc.)
Size 10: D 24.7x32x2 (adapted) (1pc.)
Cavity
S
R
O
Z
156 87 10 11
2
3
94
Size 06 Size 10
(mm) (mm)
D1 M28 x 1,5 M35 x 1,5
ÆD2 25 H9 32 H9
ÆD3 6 10
ÆD4 6 10
ÆD5 24,9 31,9
ÆD6 15 18,5
ÆD7 6 10
L1 15 18
L2 19 21+0,4
L3 32 35
L4 35 41
L5 45 52
L6 56,5±5,5 67,5±7,5
L7 65 80
T
P
5
HA 5061
Cartridge in threaded housing - models „M“ and „G“
1 Name plate
2 Adjustment mechanism - see page 4
3 4 mounting holes
4 2 threaded holes (other mounting possibility)
5 Port P’ (as input can be used P or P’)
thread M1/L1
21 35
4
P'
T
P
Model
L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18
VPP1-06-xM/x
45 7.5 25 7.5 45 22,5 55 15 40 20 7,5
VPP1-06-xG/x
VPP1-08-xM/x
60 10 40 10 60 30 70 20 49 21 10
VPP1-08-xG/x
VPP1-10-xM/x
VPP1-10-xG/x
Model
M1 M2
ÆD1 ÆD2 L1 L2 L3 L4 L5 L6 L7
VPP1-06-xM/x
M14 x 1,5
M6 25 6,6 12 10
0,5
80 60 40 20
VPP1-06-xG/x
G 1/4
VPP1-08-xM/x
M18 x 1,5
M8
30
9 16 20 100 80 60 30
VPP1-08-xG/x
G 3/8 28
VPP1-10-xM/x
M22 x 1,5
34
VPP1-10-xG/x
G 1/2
HA 5061
Required surface finish of
interface
Cartridge in subplate mounted housing - model „P“
1 Name plate
2 Adjustment mechanism - see page 4
3 Port P', thread M1/H1 can be used as input
pressure or for measuring
4 4 mounting holes
5 Square ring:
size 06 - DKAR 00011 [7.65x1.68 (2 pcs.)]
size 10 - DKAR 00014 [12.42x1.68 (2 pcs.)]
2 1543
P'
TP
P'
Accessories (delivered with subplate model „P“)
Bolt kit Square ringe
Size 06
M6x50 DIN 912-10.9 (4 pcs.)
Tightening torque 8.9 Nm
DKAR 00011
7,65 x 1,68 (2 pcs.)
Size 10
M8x70 DIN 912-10.9 (4 pcs.)
Tightening torque 15 Nm
DKAR 00014
12,42 x 1,68 (2 pcs.)
Seak kit for cartridge valve
Type
Dimensions, quantity
Ordering number
O-ring Back-up ring U-Seal
Size 06
Standard NBR
8 x 1,8 (1 pc.) 19,43 x 23,79 x 1,14 (1 pc.) 17,4 x 24 x 1,5 (1 pc.)
1597210020 x 2,65 (1 pc.) - -
20 x 2 (1 pc.) - -
Size 10
Standard NBR
8 x 1,8 (1 pc.) 27,46 x 31,8 2 x1,1 (1 pc.) 24,7 x 30,8 x 2 (1 pc.)
1597220020 x 2 (1 pc.) - -
26,64 x 2,62 (1 pc.) - -
Spare Parts
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
Tel.: +420-499-403111, Fax: +420-499-403421
E-mail: sales.cz@argo-hytos.com
www.argo-hytos.com
Model
M1 H1
ÆD1 ÆD2 ÆD3 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11
VPP1-06-xP/x
G 1/4 12
6 10,8 6,6 80 60 40 20 45 22,5 55 15 40 20 7,5
VPP1-10-xP/x
10 15,6 9 100 80 60 30 60 30 70 20 45 21 10
Note: Subplates - see catalog HA 0002
Caution!
The packing foil is recyclable.
The protecting plate can be returned to the manufacturer.
For applications outside these parameters, please consult the manufacturer.
The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.
6
