1
q
Screw-in cartridge valve
q
For leak-free applications
q
Simple design
q
High reliability
A
P
T
The fluid pressure in port P opens the ball check valve
(1), thus allowing the fluid to pass to port A. Due to the
area and pressure differential between ports P and A,
the poppet (2) closes tightly the connection between
ports A and T.
If there is no pressure in port P, then any pressure in port
A causes the fluid to pass in the direction A ® T. At the
same time, the ball check valve provides a leak free
closure between ports A and P.
The valve housing and the poppet are made of steel and
hardened steel respectively.
The valve is delivered without any surface treatment.
Functional Description
Spare Parts
Seal kit
Type Dimensions, quantity Ordering number
Standard NBR
O-ring
14 x 1.78 (1 pc.)
227375009 x 1.8 (1 pc.)
10 x 1 (1 pc.)
Viton
14 x 1.78 (1 pc.)
227376009.25 x 1.78 (1 pc.)
10 x 1 (1 pc.)
Ordering Code
VJL2 - 304 -
3 way design
Valve size
Shuttle Valve
Type of the connecting thread
M Metric thread (M22x1.5)
G Pipe thread (G1/2)
Seals
no designation Standard (NBR)
V Viton (FPM)
Dimensions in millimeters
HA 5007
7/2012
Size 04 · 210 bar (3000 PSI) · 15 L/min(4 GPM)
Logical 3 Way Check Valves
VJL2-304
Replaces
HA 5007 4/2007
2
HA 5007
Technical Data
Valve size 04
Nominal flow rate P ® A L/min (GPM) 15 (4)
Nominal flow rate A ® T L/min (GPM) 15 (4)
Maximum working pressure bar (PSI) 210 (3000)
Pressure drop bar (PSI) see the characteristic
Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524
Fluid temperature range (NBR) °C (°F) -30 ... +100 (-22 ... +212)
Fluid temperature range (Viton) °C (°F) -20 ... +120 (-4 ... +248)
Viscosity range mm
2
/s (SUS) 20 ... 400 (98 ... 1840)
Maximum degree of fluid contamination Class 21/18/15 to ISO 4406
Weight kg (lbs) 0.04 (0.088 )
Mounting position unrestricted
Dp-Q Characteristic Measured at n = 32 mm
2
/s (156 SUS)
Valve Dimensions Dimensions in millimeters (inches)
2
1
(
1.056
)(
2.113
)(
3.170
)(
4.227
)
(29)
(58)
(87)
(116)
(145)
(174)
Pressure drop Dp [bar (PSI)]
Flow Q [L/min (GPM)]
Valve Cavity
2 4 3
1
Dimensions in millimeters:
1 Screw driver slot
for valve in cavity
2 O-ring 9 x 1.8 NBR70 (1 pc.),
supplied with valve
3 O-ring 14 x 1.78
4 O-ring 10 x 1 (1 pc.),
supplied with valve
Caution!
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
Tel.: +420-499-403111, Fax: +420-499-403421
E-mail: sales.cz@argo-hytos.com
www.argo-hytos.com
Pressure drop Dp related to flow rate.
Flow in direction
1
P ® A
2
A ® T
The packing foil is recyclable.
The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.
