1
2
1 2 3 5
6
4
1
2
1 2 3 5 64
1
HA 4063
7/2012
2/2 Way Solenoid Operated
Directional Control Valves Poppet
Type
SD3E-B2
The pilot operated 2/2 way solenoid actuated poppet
valves control in the first line the start and stop function of
the oil flow. The valve consists of the valve bushing (1),
main control spool (2), return spring (3), cartridge with
actuating system (4) and of the solenoid coil (5) that is
mounted on the actuating system. The valve bushing is
screwed into the cartridge part.
In the variant normally closed / normally open, the valve
is securely held in the respective basic position by a
spring. By energizing the solenoid coil the spring force is
overcome and the pilot valve is pressed onto the seat or
lifted. Opening and closing of the main control spool is
hydraulically supported through the orifice boring
created in the main control spool.
The DC solenoid coils can be delivered for 12 V and 24 V
supply voltages.
For the alternating current supply, either of 120V/60Hz or
230V/50Hz voltage, the relevant rectifiers for the C19 coil
types are available in the auxiliary connector. For the
C22 coil types and AC voltage design, the rectifiers are
integrated directly into the connector base. . By
loosening the fixing nut (6), the solenoid coil can be
replaced or turned in the range of 360°.
Notice.
The valves are supplied without solenoids coils. The
solenoid coil, the terminal box and the body for line
mounting have to be ordered separately.
7/8-14 UNF •p
max
420 bar (6091 PSI)• Q
max
75 L/min (19.81 GPM)
Absence of current opened 2O2
Absence of current closed 2L2
Functional Description
Replaces
HA 4063 10/2010
q
2/2 way cartridge valves solenoid operated
with spool direction
q
Manual override
q
High transmitted power
2
HA 4063
Ordering Code
SD3E-B2
/
Standard S
High Performance H
Description
Refer to the table with functional symbols
Functional Symbols
Manual Override Dimensions in millimeters (inches)
Manual override
No designation standard for 2O2
M2 covered with rubber bootn only for 2O2
M5 socket head screw
M9 without manual override
Seals
No designation NBR
V FPM (Viton)
Standard valve ~82,0(3.228)
High performance valve
~100,0(3.937)
Standard valve ~78,0(3.071)
High performance valve
~84,8(3.339)
Standard valve ~78,0(3.071)
No designation - Standard for 2O2
Designation M2 - for 2O2
covered with rubber bootn
Designation
M5 - for 2L2
by screwing in of the socket
head screw 2,5(0.098)
High performance valve
~90,0(3.543)
Designation
M5 - for 2O2
by screwing in of the socket head
screw 2,5(0.098)
Standard valve~70,5 (2.776)
High performance valve
~83,0 (3.268)
Standard valve~71,0 (2.795)
High performance valve
~83,0 (3.268)
Standard valve~70,5 (2.776)
High performance valve
~83,0 (3.268)
Designation
M9 - for 2L2
without manual override
Designation M9 - for 2O2
without manual override
Designation Symbol
Designation Symbol
2/2 Way Solenoid Operated
Directional Control Valve
Poppet Type 7/8-14 UNF
Solenoid coil, terminal box and body for line mounting have to be ordered separately. For selection of solenoid coil
and terminal box type use catalogue HA 8007. For selection of valve body for in-line mounting use catalogue HA0018.
3
HA 4063
Connection
1
2L2
1
2O2
Connection
1
2L2
1
2O2
Flow Q ( )[ ]L/min GPM
(2030)
(3046)
(1015)
(6092)
(7107)
(4061)
(5076)
0 15 30 45 60 75
100
150
50
300
350
200
250
Flow Q ( )[L/min GPM
(1450)
(2176)
(725)
(4351)
(5076)
(2901)
(3626)
0 (4.0) (7.9) (11.9) (19.8)(15.8)
1
0 15 30 45 60 75
140
210
70
420
490
280
350
0 (4.0) (7.9) (11.9) (19.8)(15.8)
1
Operating pressure p bar PSI[ ]( )
Operating pressure p bar PSI[ ]( )
Standard valve
Oil 80 °C (176 °F) / Ambient temperature 50 °C (122 °F)
Voltage Un -10% [V], 24V
High performance valve
Oil 80 °C (176 °F) / Ambient temperature 50 °C (122 °F)
Voltage Un -10% [V], 24V
Standard High performance
Valve size B2
Cartridge cavity 7/8-14 UNF-2A
Maximum flow L/min(GPM) 60 (15.85) 75 (19.81)
Max. operating pressure bar (PSI) 250 (3626) 420 (6091)
Pressure drop bar (PSI) see Dp-Q characteristics
Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524
Fluid temperature range °C (°F ) -20 ... +80 (-4 ...+176) -20 ... +80 (-4 ...+176)
Ambient temperature, max. °C (°F ) -20 ... +50 (-4 ...+122) -20 ...+ 80 (-4 ...+176)
Viscosity range mm
2
/s (SUS) 10 ... 500 (49 ... 2450)
Maximum degree of fluid contamination Class 21/18/15 according to ISO 4406
Coil groups
1)
C19B C22B
Permissible rated voltage variation % AC,DC ±10 AC,DC ±15
Max. switching frequency 1/h 15 000
Duty cycle % 100
Service life cycles 10
7
Enclosure type to EN 60529
1)
P 67 (IP 65)
Valve tightening torque Nm ( lbf.ft) 35+5 (25.81+3.68)
Plastic nut tightening torque Nm ( lbf.ft) 3+1 (2.213+0.738) 3+1 (2.213+0.738)
Weight kg (Ibs) 0.23 (0.51) 0.30 (0.66)
Mounting position unrestricted
Valve body ( data sheet HA 0018) SB-B2
Technical Data
p-Q Characteristics Measured at n = 32 mm
2
/s (156 SUS)
Operating limits for hydraulic power transferred by the directional valve. For respective spool type - see
functional symbols.
Flow Q [L/min (GPM)]
Flow Q [L/min (GPM)]
1)
see data sheet coils HA 8007
HA 4063
Coil for Standard valve
C19B
Type of the Solenoid Coils Dimensions in millimeters (inches)
Coil for High performance valve
C22B
Dp-Q Characteristics Measured at n = 32 mm
2
/s (156 SUS)
Pressure drop Dp related to flow rate.
Standard valve + High performance valve
4
*Use the terminal box with rectifier!
**Standard length of connecting wire is 300 mm, other lengths on request.
Note:
Example of most frequent coil types.
For complete range of SD3E-B2 valve coils with technical information about voltage, enclosure type, terminal box please
refer to coil data sheet HA 8007.
2
4
0
12
6
8
10
15 30 45 60 75
2
1
3
(14.5)
(29.0)
(72.5)
(43.5)
(58.0)
(87.0)
(3.96) (7.93) (11.89) (15.85) (19.81)
Connection Dirrection Solenoid
1
2L2
1® 2 switched off
2
2L2
2® 1 switched on
2
2L2
1® 2 switched on
2
2O2
1® 2 switched off
3
2O2
2® 1 switched off
Flow Q [L/min (GPM)]
Pressure drops Dp [bar (PSI)]
49,4(1.945)
19
(0.748)
37
(1.457)
29(1.142)
22(0.866)
45(1.772)
32,5(1.279)
52(2.047)
Standard valve High performance valve
Solenoid Connector
SD3E-B2 / S... SD3E-B2 / H...
Type code Type code
12 VDC EN 175301-803-A C19B-01200E1-6NA C22B-01200E1-6,55NA
24 VDC EN 175301-803-A C19B-02400E1-25,75NA C22B-02400E1-25,3NA
12 VDC AMP-Junior-Timer ( 2-pins) C19B-01200E3-6NA C22B-01200E3A-6,55NA
24 VDC AMP-Junior-Timer (2-pins) C19B-02400E3-25,75NA C22B-02400E3A-25,3NA
12 VDC Flying leads** C19B-01200E8N300-6NA C22B-01200E8N300-6,55NA
24 VDC Flying leads** C19B-02400E8N300-25,75NA C22B-02400E8N300-25,3NA
12 VDC Deutsch DT04-2P --- C22B-01200E12-6,55NA
24 VDC Deutsch DT04-2P --- C22B-02400E12-25,3NA
120 VAC EN 175301-803-A C19B-10600E1-494NA* C22B-10600E1-545NA*
230 VAC EN 175301-803-A C19B-20500E1-1653NA* C22B-20500E1-2353NA*
120 VAC EN 175301-803-A (with rectifier) C19B-12060E5-494NA C22B-12060E5-545NA
230 VAC EN 175301-803-A (with rectifier) C19B-23050E5-1653NA C22B-23050E5-2353NA
5
HA 4063
Standard valve
High performance valve
HEX 27
Valve Dimensions Dimensions in millimeters (inches)
70,8(2.79)
7/8-14 UNF-2A
30,5(1.20)
82,6(3.25)
7/8-14 UNF-2A
Æ
15,82 -0,025
(0.622/0.623)
30,5(1.20)
Æ
15,82 -0,025
(0.622/0.623)
Æ
19(0.75)
Æ
22(0.87)
HEX 30
HEX 27
Cavity Dimensions in millimeters (inches)
25,3+0,4(0.99+0.016)
33,3+0,4(1.31+0.016)
min 31,4(1.24)
max 23,6(0.93)
min14(0.55)
Æ
24±0,05(0.94/0.95)
min 34(1.34)
Æ
max 1(0.04)
min 16(0.63)
(0.624/0.627)
2,5 (0.1+0.016)+0,4
7/8-14 UNF
-2B
3
0
°
R 0,2
R 0,2
Æ
15,87
+0,05
A
3
,2
1,61
A
0,05
A
0
,0
5
A
0
,0
4
3,2
(
(
,
90° 10°
±
1
,6
30 2°°
±
6
HA 4063
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
Tel.: +420-499-403 111
E-mail:info.cz@argo-hytos.com
www.argo-hytos.com
Caution!
The packing foil is recyclable.
The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.
Standard and high performance valve
Dualseal - PU O-ring - NBR O-ring - Viton Ordering number
13,47 x 15,87 x 3,1 (1pc.) 19,4 x 2,1 (1pc.) - 18960400
13,47 x 15,87 x 3,1 (1pc.) - 19,4 x 2,1 (1pc.) 18960500
Solenoid retaining nut with seal for standard valve
Type of nut O-ring - Viton Ordering number
Standard nut 18 x1,5 (1pc.) 20777000
Nut M2 18 x1,5 (1pc.) 20777600
Solenoid retaining nut with seal for high performance valve
Type of nut O-ring - Viton Ordering number
Standard nut 22 x 2 (1pc.) 15844600
Nut M2 22 x 2 (1pc.) 18961700
Spare Parts Dimensions in millimeters
