1
2/2 Hydraulic Operated Cartridge
Directional Control Valves
SD6H-A3
HA 4052
03/2012
Hydraulic operated cartridge valve
Two position Valves
Two ranges of opening pressure
Adjusting of the pressure needed for shifting
External Drain of spring Aren - stable setting
HEX 6
HEX 24
HEX 6
HEX 27
SD6H-A3/2I11-6
SD6H-A3/2I12-13
SD6H-A3 / -
2/2 Hydraulic Operated Cartrige
Directional Control Valves
Functional symbols
Refer to the table with functional symbols
Cracking pressure
6 10 - 60 bar
13 35 -130 bar
Seals
No designation Standard (NBR)
V Viton ( FPM)
3
3
Functional Symbols
Designation Symbol Designation Symbol
2I11 2I12
The valve allows partitioning of the working fluid flow by
a slide. The slide moves in a steel housing and is adjus-
ted by the pressure of the working fluid acting on the front
surface of the slide (X). The pressure required to changeo-
ver the slide is adjustable by pressing the spring adjusting
screw. The transfer of the force exerted by the spring to the
slide through hardened steel ball in the axis of the motion
greatly reduces the effect of radial forces on the slide and
its jamming in the housing. The valve is available in two
interconnecting versions. The basic position of the slide
allows the flow through valve P→S (2I11) or vice versa
the valve is closed (2I12). The liquid from the space of the
spring is drained through an external outlet (Y) and thus
cannot influence the magnitude of the set pressure.
In basic version the valve body and the setting screw are
zinc coated.
Ordering Code
3/4-16 UNF • pmax 350 bar • Qmax 30 L/min