1
Functional Description
The 2/2 poppet type directional control valves are
designed to check and open flow of the hydraulic
fluid. Additionally, they can also provide flow
throttling.
The valve consists of the housing (1), the poppet (2) and
the actuating section (3).
Opening and closing of the valve is handled by a
poppet. The poppet is pushed onto the seat by a spring,
thus providing leakfree closure of the valve. The poppet
can be operated by a push hand knob or a hand lever.
The model with the hand knob (3) has 2 operating
positions. After releasing the hand knob, the spring
returns the valve into its closed position. The model with
a hand lever in fact also has only two operating
positions, but the hand lever can be set to 3. position.
These are as follows:
Position 0 , middle hand lever position - the valve is
closed by means of the return spring.
Position I. opens the valve against the return spring.
Position II. actuates a contact (with the model with
micro switch), e.g. in order to turn on the pump motor by
means of a switching relay. With the model without
microswitch, this position also exists, but it does not
have any function.
Caution! The
preferential flow direction is 2 à 1
because of smaller operating forces.
The basic surface treatment of the valve is zinc coating.
HA 4051
7/2012
3/4-16 UNF · p
max
250 bar (3626 PSI) · Q
max
20 L/min (5.3 GPM)
2/2 Hand Operated Directional
Control Valves Poppet Type
SD1M-A2/S
q
Poppet design - leakfree closure
q
Simple design
q
2 models
Replaces
HA 4060 10/2007