1
Functional Description
The directly operated 3/2 way solenoidactuatedspool valve
controls in the first line the start and stop function of the oil
flow. The valve consists of the valve body (1), control spool
(2), return spring (3), cartridge with actuating system (4) and
of the solenoid coil (7) that is mounted on the actuating
system. The valve bushing is screwed into the cartridge part
(4).
The valve bushing is fixed in the cartridge by a wire ring (5)
and sealed with the seal ring (6). Separation of the valve
bushing and the cartridge prevent transmitting the stresses,
which could be caused by too high tightening torques. The
DC solenoid coils can be delivered for 12 V and 24 V supply
voltages. For AC applications 120 V/ 60 Hz or 230 V/ 50 Hz,
the suitable rectifiers for the Light line solenoid coils are
available, with them being mounted in an additional
terminal box. With the high power solenoid coils in AC
variants, the rectifiers are integrated directly in the
connector. By loosening the fixing nut (8), the solenoid coil
can be replaced or turned in the range of 360°. The valve
body is zinc coated.
Note:
The valves are supplied without solenoids coils. The
solenoid coil, the terminal box and the housing body for line
mounting have to be ordered separately.
Light line
High performance
Replaces
HA 4041 11/2013
HA 4041
07/2014
3/2 Way Solenoid Operated
Directional Control Valves Spool
Type
SD2E-A3
3/4-16 UNF • p
max
350 bar (5076 PSI) • Q
max
30 L/min (7.9 GPM)
q
Hardened and precision working parts
q
High flow capacity
q
High transmitted hydraulic power
q
Wide range of manual overrides available
q
All ports may be fully pressurized
q
Variety of optional spools connections available
q
Coil interchangeability with all series SD*- A* valves
1
2
3
1
2
3

  

  
2D31
2D26
2D25
2D21
2
HA 4041
Ordering Code
Manual Override Dimensions in millimeters (inches)
Designation Symbol InterpositionDesignation Symbol Interposition
Functional Symbols
SD2E-A3
/
3/2 Way Solenoid Operated
Directional Control Valve
Light line L
High performance H
Description
Refer to the table with functional symbols
Seals
No designation NBR
V FPM (Viton)
No designation - standard
Light line ~70.2(2.63)
High performance ~70,0 (2.76)
Manual override
No designation standard
M5 socket head screw
M9 without manual override
Solenoid coil, terminal box and body for line mounting have to be ordered separately. For selection of solenoid coil
and terminal box type use catalogue HA 8007. For selection of valve body for in-line mounting use catalogue HA0018.
Designation M9 - without manual override
Light line ~67,2 (2.65)
High performance ~70,0 (2.76)
Designation M5 - with socket head 2.5 (0.098)
Light line ~77,2(3.04)
High performance ~77,5(3.05)
3
HA 4041
High performance
Öl 80 °C (176 °F) / Ambient temperature 50 °C (122 °F)
Voltage Un -10% [ V ] 24VDC
Light line
Oil 60 °C (140 °F) / Ambient temperature 50 °C (122 °F)
Voltage Un -10% [ V ] 24VDC
p-Q Characteristics Measured at n = 32 mm
2
/s (156 SUS)
Operating limits for hydraulic power transferred by the directional valve. For respective spool type - see
functional symbols.
Light line High performance
Cartridge thread 3/4-16 UNF-2B
Maximum flow L/min (GPM) 20 (5.3) 30 (7.9)
Max. operating pressure bar (PSI) 250 (3626) 350 (5076)
Pressure drop bar (PSI) see Dp-Q characteristics
Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524
Fluid temperature range °C (°F) -20 ... 60 (-4 ... 140) -20 ... 80 (-4 ...176)
Ambient temperature, max. °C (°F) -20 ... 50 (-4 ...122) -20 ... 80 (-4 ... 176)
Viscosity range mm
2
/ s (SUS) 10 ... 500 (49 ... 2450)
Maximum degree of fluid contamination Class 21/18/15 according to ISO 4406 (2006)
Coil groups
1)
C14B C19B
Permissible rated voltage variation % AC,DC ±10 AC,DC ±15
Max. switching frequency 1/h 15 000
Duty cycle % 100
Enclosure type to EN 60529
1)
IP 67 (IP 65)
Service life cycles 10
7
Valve tightening torque Nm ( lbf.ft) 30+2 (22.127+1.475)
Plastic nut tightening torque Nm ( lbf.ft) 3+1 (2.213+0.738) 3+1 (2.213+0.738)
Weight kg(Ibs) 0,15 (0.33) 0,20 (0.44)
Mounting position unrestricted
Technical Data
1)
see data sheet coils HA 8007
1 2,3, ,4 2 ,4,3
(1450)
(2176)
(725)
(4351)
(2901)
(3626)
100
150
50
300
200
250
Operating pressure p [bar (PSI)]
0 4 8 12 16 20
(1.1) (2.1) (3.2) (4.2) (5.3)
Flow Q ( )[ ]L/min GPM
1
1,2,3,4
(1450)
(2176)
(725)
(4351)
(5076)
(2901)
(3626)
100
150
50
300
350
200
250
Operating pressure p [bar(PSI)]
Flow Q [ ( )]L/min GPM
( . )1 3
( . )2 6
( .0)4
( . )5 3
( . )6 6
( .9)7
5 10 15 20 25 30
0
1, 2
2
1
1, 2
3
Connection Direction
1
2D21 3®2, 2®1
1
2D25 3®2, 2®1
1
2D31 3®1
2
2D26 3®2, 2®1
3
2D31 2®1
Connection Direction
1
2D26 3®2
2
2D26 2®1
3
2D25 3®2, 2®1
4 2D21 3®2, 2®1
4
HA 4041
Dp-Q Characteristics Measured at n = 32 mm
2
/s (156 SUS)
Pressure drops related to flow rate.
Light line + High performance
Coil for Light line
C14B
Type of the Solenoid Coils Dimensions in millimeters (inches)
Coil for High performance
C19B
41,3(1.63)
20(0.79)
13,4
30(1.18)
(0.53)
49,4(1.95)
19
(0.75)
37
(1.46)
29(1.14)
Note:
Example of most frequent coil types.
For complete range of SD2E-A3 valve coils with technical informatik about voltage, enclosure type, terminal box please
offer to coil data sheet HA 8007.
Light line High performance
Solenoid Connector
SD2E-A3 / L...
SD2E-A3 /
H...
Type code Type code
12 VDC EN 175301-803-A C14B-01200E1-6,55NA C19B-01200E1-7,1NA
24 VDC EN 175301-803-A C14B-02400E1-26,2NA C19B-02400E1-28,8NA
12 VDC AMP-Junior-Timer C14B-01200E3A-6,55NA C19B-01200E3-7,1NA
24 VDC AMP-Junior-Timer C14B-02400E3A-26,2NA C19B-02400E3-28,8NA
120 VAC EN 175301-803-A with integrated rectifier - C19B-12060E5-527NA
230 VAC EN 175301-803-A with integrated rectifier - C19B-23050E5-2065NA
120 VAC* EN 175301-803-A (with rectifier) C14B-10600E1-536NA C19B-10600E1-527NA
230 VAC* EN 175301-803-A (with rectifier) C14B-20500E1-2476NA C19B-20500E1-2065NA
*Use the terminal box with rectifier!
4
Pressure drop p bar(PSI)
D
[ ]
Flow Q [ ( )]L/min GPM
( . )1 3
( . )2 6
( .0)4 ( . )5 3 ( . )6 6 ( .9)7
5 10 15 20 25 30
0
( )58
( )116
( )174
( )232
( )290
8
12
16
20
24
( )348
4
2
1
3
2
Connection Direction
1
2D21 3®2
1
2D25 3®2
1
2D31 2®1
2
2D21 2®1
3
2D26 3®2
4
2D25 2®1
4
2D26 2®1
4
2D31 3®1
5
HA 4041
Valve Dimensions Dimensions in millimeters (inches)
276HR 276HR
1
2
3
39 5 (1.55),
3/4-16 UNF-2A
1 ,4 22
(0.56)
1 ,5 82
(0.62)
70.2 (2.76)
13,35
(0.53)
Light line
HEX 27
HEX 27
High performance
HEX 24
HEX 30
6
HA 4041
Caution!
The packing foil is recyclable.
The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
Tel.: +420-499-403 111
E-mail: info.cz@argo-hytos.com
www.argo-hytos.com
Cavity Dimensions in millimeters (inches)
Spare Parts Dimensions in millimeters
Light line and High performance
Dualseal - PU O-ring - NBR O-ring - Viton Ordering number
11,87 x 14,27 x 3,1 (1pc.)
17 x 1,8 (1pc.) - 15661700
13,4 x 15,87 x 3,1 ( 1pc.)
11,87 x14,27 x 3,1 (1pc)
- 17,17 x 1,78 (1pc.) 20777200
13,4 x 15,87 x 3,1 ( 1pc.)
Solenoid retaining nut with seal for Light line
Type of nut O-ring - Viton Ordering number
Standard nut 12,3 x 2,4 (1pc.) 20776900
Solenoid retaining nut with seal for High performance
Type of nut O-ring - Viton Ordering number
Standard nut 18 x1,5 (1pc.) 20777000