The RPE4-10 directional control valves consist of

housing (1), control spool (5), centering springs (4) and

operating solenoids (2, 3).

The three-position directional control valves are fitted

with two solenoids and two springs. The two position

directional control valves have one solenoid and one

return spring.

The operating solenoids are DC solenoids and are

supplied through connectors (6, 7) without rectifiers. For

AC supply the solenoids are provided with rectifiers,

which are integrated directly into the connectors (6, 7) or

inside the coil.

By loosening the retaining nut (8), the solenoid can be

turned on its axis and locked in three positions 90° apart.

Provided that the pressure in T-port does not exceed

(25 bar), the spool of the valve can be shifted by manual

override (9).

The basic surface treatment of the valve housing (1) is

phosphate coated, the operating solenoids (2, 3) are

zinc coated.

HA 4039

11/2014

Size 10 · p

max

350 bar · Q

max

140 L/min

Directional Control Valves

Solenoid Operated

RPE4-10

Replaces

HA 4039 7/2009

a b

   



4/3, 4/2 way directional control valves

Cylindrical DC solenoids with removable coils.

Electrical connectors can be rotated in three

positions 90° apart

Spool-position sensor optional

4 chamber spool - reducing

Push button manual override

Installation dimensions to DIN 24 340 /

ISO 4401 / CETOP RP121-H

Subplates see data sheet HA 0002

CSA Upon request

Functional Description

HA 4039

Ordering Code

RPE4-10 /

Nominal size

Number of operating positions

two positions 2

three positions 3

Directional Control Valve

Solenoid Operated

Seals

no designation standard (NBR)

V Viton (FPM)

Rated supply voltage of solenoids

(at the coil terminals)

12 V DC / 3.17 A

01200

24 V DC / 1.73 A 02400

205 V DC / 0.20 A 20500

230 V AC / 0.20 A / 50 (60) Hz 23050

120V AC / 60Hz* 12060

The AC coils correspond with E5 type.

Functional symbols

see the table functional symbols

Damping

no designation without damping

T2 with orifice

T3 with throttle screw

Manual override

no designation standard

N2 covered with rubber boot

Type of the solenoid coil

with for the electrical connector, EN 175301-803 E1

with integrated rectifier and for the electrical connector E5

EN 175301-803

Note: Connector of the position sensor is not supplied

(see ordering number on page 9)

FOR PREFERRED TYPES SEE BOLD TYPING IN ORDERING CODE, FUNCTIONAL SYMBOLS

AND TABLE OF PREFERRED TYPES ON PAGE 10

CSA Upon request

Sensing of the end position

no designation without s ensor

S1 normally-open sensor to 50bar

S2 normally-open sensor to 210bar

S4 normally-closed sensor to 50bar

HA 4039

Designation Symbol Interposition Designation Symbol Interposition

Y51

Z51

C51

C11

H11

R11

Y11

R21

Z11

Technical Data

Nominal size mm 10

Maximum flow L/min see p-Q characteristics

Maximum operating pressure at ports P, A, B bar 350

Maximum operating pressure at port T bar

50 for version S1, S4 and 210 for versinon S2

Pressure drop bar see Dp-Q characteristics

Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524

Fluid temperature range (NBR / Viton) °C -30 ... +80 / -20 ... +80

Ambient temperature max. °C +50

Viscosity range mm

/s 20 ... 400

Maximum degree of fluid contamination Class 21/18/15 to ISO 4406

Maximum allowable voltage variation % AC: ±10 DC: ±10

Maximum switching frequency 1/h 15 000

Switching time, ON; at n = 32 mm

/s ms AC: 50 ... 330 DC: 50 ...120

Switching time, OFF; at n = 32 mm

/s ms AC: 100 ... 300 DC: 30 ... 90

Duty cycle % 100

Service life cycles 10

Enclosure type to EN 60529 IP 65

Weight - valve with 1 solenoid

- valve with 2 solenoids

3.9

5.4

Mounting position unrestricted

Functional Symbols

HA 4039

p-Q Characteristics Measured at n = 32 mm

P-A P-B A-T B-T P-T

Z11 1 1 2 2

Z51 1 2

H11 1 1 2 2 1

H51 1 2 1

P11 1 1 2 2

P51 1 2

Y11 1 1 2 2

Y51 1 2

C11 4 3 4 5 1

C51 4 5 1

R11 1 1 2 2

X11 1 1 2 2

B11 1 1 2 2

B51 1 2

L21 1 1 1 2 2

R21 1 1 1 3

J15 1 1 2 3

J75 1 1

A51 1 1

C21 6 6 6 6 4

Flow Q [L/min]

Operating pressure p [bar]

Flow Q [L/min]

Dp-Q Characteristics Measured at n = 32 mm

Pressure drop Dp related to flow rate.

Pressure drop Dp [bar]

Z11 Z51 H11 H51 P11 P51 Y11 Y51 C11 C51 R11 X11 B11 B51 L21 R21 J15 J75 A51 C21

1 1 1 1 1 1 5 5 3 3 2 2 4 4 7 2 6 6 8 9

Operating limits for maximum hydraulic power transferred by the directional valve. For respective spool type - see

functional symbols. The power curves hold true for symmetrical valve flows (e.g. flows in directions P-A and B-T are identical).

In case of an asymmetric flow, the power curves can lie substantially lower. In such cases we highly recommend to consult the

respective power curve with the valve manufacture.

hexagon5

hexagon36

hexagon32

HA 4039

Valve Dimensions Dimensions in millimetres

Valve with one solenoid "a"

Functional symbols R11, R21,

Y51, C51, Z51, H51,

Valve with one solenoid "b"

Functional symbols C11, H11

1 Solenoid a

2 Solenoid b

3 Manual override

4 Name plate

5 Square ring 12,42 x 1,68 (5 pcs.)

supplied with valve

6 4 mounting holes

7 Retaining nut of the solenoid

8 Electrical connector, EN 175301-803

9 Throttle screw

10 Space reguired to remove connector

Valve with two solenoids

Required surface finish of

interface.

HA 4039

Type of the Solenoid Coil

Solenoid coil with terminal for the electrical

connector, EN 175301-803

Solenoid coil with integrated rectifier and

terminalfor electrical connector, EN 175301-803

Manual Override

Standard Rubber boot

Without designation

Dimensions

Description:

Standard model of the manual override.

Standard retaining nut of the solenoid.

Designation N2

Dimensions

Description:

Manual override protected by rubber boot.

41,5

53,5

46,5

58,5

50,5

hexagon 14 A/F

hexagon 10 A/F

hexagon 3 A/F

T2 - Noozle Æ 0,6

T3 - Throttle Screw

The control orifice allows for

stepless adjustment of

the valve shifting time.

The orifice extends

the valve shifting time.

Soft Shifting Spool Options Delay Time

Switching times

Switching time, on and off ms 120 ... 350

Switching times

Switching time, on and off ms 30 ... 2000

HA 4039

The proximity sensor transforms

the spool position into an

electrical step signal. It can be

used with directional control

valves with one or two solenoids.

106

~257

8,5

a (b) Sa (Sb)

36,5

113,5

~391

bSbSaa

Technical Data of the Connector

Power supply voltage range V 10 ... 30 DC

Ambient temperature range °C -25 ... +80

Indication yellow LED

Two-Position Directional Control Valve

Dimensions in millimeters

Signal of solenoid a (b) Signal of sensor Sa (Sb) LED

S1, S2 - normally-open S4 - normally-closed S1, S2 S4

0 1 0 ON OFF

1 0 1 OFF ON

Technical Data of the Sensor S1, S4 S2

Rated power supply voltage V 24 DC

Power supply voltage range V 10 ... 30 DC

Rated current mA 200

Enclosure type of sensor to EN 60529 IP 67

Max. operating pressure bar 50 210

Switching frequency Hz 1000

Ambient temperature range °C -25 ... +80

Three-Position Directional Control Valve Dimensions in millimeters

Signal of solenoid Signal of sensor Sa (Sb) LED

S1, S2 - normally-open S4 - normally-closed S1, S2 S4

a b Sa Sb Sa Sb Sa - LED Sb - LED Sa - LED Sb - LED

0 0 1 1 0 0 ON ON OFF OFF

1 0 0 1 1 0 OFF ON ON OFF

Spool Position Sensor

S1, S2 - Circuit diagram of the

normally-open sensor

S4 - Circuit diagram of the

normally-closed sensor

Connector

PNP Sensor

Connector

PNP Sensor

HA 4039

1 Solenoid coil

2 Nut with seal

3 Electrical connector

4 Connector of position sensor with LED

5 Sensor

6 Seal kit

7 Mounting bolts

8 Rubber cap with manual override

Spare Parts

3 5

2 8

HA 4039

Connector of position sensor

Type designation Model Max. input voltage Ordering number

K02

connector of position

sensor with LED

10...30 V DC 17364800

S1 normally-open sensor 10...30 V DC 405111129213

S2 normally-open sensor 10...30 V DC 18838900

S4 normally-clsed sensor 10...30 V DC 20725300

Seal kit

Type

Dimensions

Ordering number

Square ring O-ring

Standard NBR70 12,42 x 1,68 (5 pcs.), 11,9 x 8,4 x 1 (1 pc.) 23,81 x 2,62 (2 pcs.), 1,8 x 1 (1 pc.) 15901000

Viton 12,42 x 1,68 (5 pcs.), 11,9 x 8,4 x 1 (1 pc.) 23,47 x 2,62 (2 pcs.), 1,8 x 1 (1 pc.) 15901100

Mounting bolts

Dimensions Tightening torque Ordering number

M6 x 40 DIN 912-10.9 (4 pcs.) 14+2 Nm 15847700

Soft Shift Conversion Kit

T2 10 Nm 15901200

T3 10 Nm 15901300

Solenoid coil

Type designation of the coil voltage

Type of the coil

E1 E5

Ordering number

01200 16195700

02400 16196100

20500 23898000

23050 16195100

12060 17366300

Solenoid retaining nut with seal

Type of the nut Seal ring Ordering number

Standard nut 30 x 2 15900800

Rubber cap with manual override 15900900

Electrical connector, EN 175301-803

Type

designation

Connector A grey Connector B black

Ordering number

K1 16202200 16202100

K5 16202600 16202500

K2 16202800 16202700

16202400

16202300

K4 16203000 16202900

Electrical Connector, EN 175301-803

Connector B (black)

without rectifier - M16x1.5

( bushing bore Æ 6-8 mm)

230 V AC/DC

Connector A (grey)

Connector B (black)

without rectifier - M16x1.5

( bushing bore Æ 4-6 mm)

230 V AC/DC

Connector A (grey)

Connector B (black) without rectifier with LED

and quenching diode - M16x1.5

( bushing bore Æ 6-8 mm)

12 ... 24 V DC

Connector A (grey)

Connector B (black)

with rectifier - M16x1.5

( bushing bore Æ 6-8 mm)

230 V AC

Connector A (grey)

K4 Connector B (black)

with rectifier with LED

and quenching diode - M16x1.5

( bushing bore Æ 6-8 mm)

230 V AC

Recommended solenoid coils used with electrcial connector with rectifiers - type designation K3, K4

Rated supply source voltage

(permissible rated voltage variation ±10 %)

Type designation of the solenoid voltage

230 V AC / 0.17 A / 50 (60) Hz 20500

HA 4039



In the case of directional valves with two solenoids, any of the solenoids may be energized, but only after switching

off the other.



Directional valves with other functional symbols as those shown in the table, please consult with the manufacturer.



The packing foil is recyclable.



The protective plate can be returned to manufacturer.



Mounting bolts M6 x 40 DIN 912-10.9 or studs must be ordered separately.



The technical information regarding the product presented in this catalogue is for descriptive purposes only.

It should not be construed in any case as a guaranteed representation of the product properties in the sense

of the law.



For RPEW4-10 with CSA only: Use supply wires suitable for at least 75°C.

Caution!

Subject to alteration without notice!

ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí

Tel.: +420-499-403111, Fax: +420-499-403421

E-mail: sales.cz@argo-hytos.com

www.argo-hytos.com

Preffered Types

Type Ordering number Type Ordering number

RPE4-103Z11 15888500 RPE4-103Z11/02400E1 15889500

RPE4-102Z51 15892000 RPE4-102Z51/02400E1 15892300

RPE4-103C11 15888700 RPE4-103C11/02400E1 15890000

RPE4-102C51 15892100 RPE4-102C51/02400E1 15892500

RPE4-103H11 15889000 RPE4-103H11/02400E1 15892700

RPE4-103Y11 15888900 RPE4-103Y11/02400E1 15893100

RPE4-102R11 15889100 RPE4-102R11/02400E1 15890700

RPE4-102R21 15889200 RPE4-102R21/02400E1 15893400

RPE4-102Y51 15892200 RPE4-102Y51/02400E1 15893700

RPE4-103Z11/01200E1 15891600 RPE4-103Z11/23050E5 21867800

RPE4-102Z51/01200E1 15891200 RPE4-102Z51/23050E5 21868300

RPE4-103C11/01200E1 15891700 RPE4-103C11/23050E5 21868500

RPE4-102C51/01200E1 15891500 RPE4-102C51/23050E5 21868800

RPE4-103H11/01200E1 15891000 RPE4-103H11/23050E5 21862100

RPE4-103Y11/01200E1 15890400 RPE4-103Y11/23050E5 21868900

RPE4-102R11/01200E1 15891900 RPE4-102R11/23050E5 21869400

RPE4-102R21/01200E1 15891300 RPE4-102R21/23050E5 21869900

RPE4-102Y51/01200E1 15891400 RPE4-102Z51/23050E5 21870100