1
Ordering Code
Basic manifolds DP6 are used for hydraulic systems
which require only one directional valve assembly. With
regard to its versatile connection possibilities, it is
suitable either for horizontal mounting of the pump drive
unit on the tank cover, or for vertical arrangement with
the pump situated in the tank under the oil level.
The steel manifold can be supplied in two sizes. A direct
operated pressure relief valve is available in six pressure
ranges.
The basic surface treatment of the block is zinc coating.
DP6-06-VPP1-S/XX
DP6-10-VPP1-S/XX
Functional Description
q
Basic manifold for hydraulic systems
q
6 pressure ranges
q
Installation dimensions to ISO 4401-AB-03-4-A,
ISO 4401-AC-05-4-A, DIN 24 340-A6
and DIN 24 340-A10
DP6 - - - /
Nominal size
06 mm
10 mm
06
10
Pressure relief valve
VPP1 - 06, 10
VPP2 - 06
VPP1
VPP2
Basic block
Pressure range
2.5
6.3
10
16
25
32
up to 25 bar
up to 63 bar
up to 100 bar
up to 160 bar
up to 250 bar
up to 320 bar
Adjustment element
S
R
Screw with inside HEX 5
Hand knob
(P)
(T B A)
HA 0012
5/2008
Replaces
HA 0012 2/2000
Size 06, 10 · p
max
350 bar · Q
max
50, 120 L/min
Basic Manifold with Pressure
Relieve Valve
DP6
2
HA 0012
Valve Dimensions Dimensions in millimeters
DP6-06-VPP1-S/XX
Port A B P T P1 T1 M
Thread
G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G1/4
Counterbore
Æ24 Æ24) Æ24 Æ24 Æ28 Æ28 Æ20
Depth
of counterbore
11115.55.51
1 Basic block
2 Pressure relief valve
3 4 mounting holes
1
2
3
(P)
(T B A)
3
Valve Dimensions Dimensions in millimeters
DP6-10-VPP1-S/XX
(P2)
(Ta)
(Tb B2 A2)
1 Basic block
2 Pressure relief valve
3 4 mounting holes
Port A B P T P1 T1 M M1
Thread
G3/4 G3/4 G3/4 G3/4 G3/4 G3/4 G1/4 G1/4
Counterbore
Æ33 Æ33 Æ33 Æ33 Æ38 Æ38 Æ38 Æ20
Depth
of counterbore
11115.55.511
1
2
3
HA 0012
Caution!
The packing foil is recyclable.
The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
Tel.: +420-499-403111
E-mail: info.cz@argo-hytos.com
www.argo-hytos.com
