11
A
P
T
A
T
P
Model S
Model R
Directly Operated Pressure
Reducing Valve
SP2A-B3
HA 5146
09/2013
Functional Description
7/8-14 UNF • p
max
420 bar (6092 PSI) • Q
max
60 L/min (15.85 GPM)
This 3 way direct operated pressure reducing valve is
designed to reduce the system pressure. Due to its
3 way design the valve is also capable of relieving the
secondary pressure. The pressure can be set by an ad-
justment screw (5).
In its initial position the valve allows free flow from
port P to A. The pressure in port A acts on the front
face of the control spool (2) against the spring
(4). When the pressure in port A reaches the set
pressure, the control spool moves into the regu-
lating position and closes the flow from port P to
A u n t i l t h e p r e s s u r e f a l l s b a c k t o t h e s e t p r e s s u r e .
This will maintain a constant pressure in line A. A fur-
ther pressure increase in port A caused by a potential
external force on the actuator will cause the spool to
shift against the spring until the spool opens port T
and allows the oil flow pass to tank.
The valve bush (1) is fixed to the cartridge (3). Un-
coupling the bush from the cartridge makes a trans-
ference of tensions caused by high tightening torques
impossible. In the basic version the valve body and the
adjustment screw are zinc plated.
High pressure valve up to 420 bar
Hardened and precision working parts
Four Optional spring ranges
Stabile pressure characteristic
over the complete pressure range
Quiet performance over complete power
range