1
Functional Description
The check valve sandwich plates are used to allow flow
in one direction and prevent flow in the other one. The
sandwich design enables vertical stacking with other
components of the same size. The check elements can
be built into one or two ports, the other ports being
through-holes.
The seat (3) is machined directly in the housing (1) and
the poppet (2) is pushed onto the seat by compression
spring (4). The cracking pressure depends on the spring
used, on its preload and on the pressurized poppet
surface area.
The valve housing surface is phosphate coated.
HA 5018
6/2012
Size 06 (D 03) · 350 bar (5076 PSI) · 50 L/min (13.2 GPM)
Check Valves Sandwich Plates
MVJ3-06
A2 P2 T2 B2
A1 P1 T1 B1
q
Sandwich plate design for use in vertical stacking
assemblies
q
Poppet design
q
Leakfree closure in one or two service ports
q
8 different models
q
Installation dimensions to ISO 4401/ DN 24 340
MODEL AB
A2 B2
A1 B1
Replaces
HA 5018 10/2010
2
HA 5018
Ordering Code
Valve size mm (US) 06 (D 03)
Maximal flow L/min (GPM) 50 (13.2)
Maximum operating pressure bar (PSI) 350 (5076)
Cracking pressure bar (PSI) 0,5 (7.25) 1,5 (21.75) 3 (43.51) 5 (72.51)
Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524
Fluid temperature range for standard sealing (NBR) °C (°F) -30 ... +80 (-22 ... +176)
Fluid temperature range for Viton seals (FPM) °C (°F) -20 ... +80 (-4 ... +176)
Viscosity range mm
2
/s (SUS) 20 ... 400 (98 ... 1840)
Maximum degree of fluid contamination Class 21/18/15 to ISO 4406
Weight kg (lbs) 0.8 (1.8)
Mounting position unrestricted
Notes: The orientation of the symbol on the name plate
corresponds with the valve function.
Functional symbols
valve side
subplate or manifold side
MVJ3-06 - -
Nominal size
Sandwich Check Valve Plate
for Stacking Assemblies
Seals
no designation
V
NBR
FPM (Viton)
Cracking pressure
005 0,5 bar ( 7.25 PSI)
015 1,5 bar (21.75 PSI)
030 3,0 bar (43.51 PSI)
050 5,0 bar (72.51 PSI)
Surface finishing
no designation
A
Phosphate
PO-A
Functional symbols
Check valve in line P
* P
Check valve in line T* T
Check valve in line A* A
Check valve in line B* B
Check valve in line A* C
Check valve in line B* D
Check valve in line A a B* AB
Check valve in line P a T* PT
* see the table Functional symbols
A2 P2 T2 B2
A1 P1 T1 B1
P
A2 P2 T2 B2
A1 P1 T1 B1
T
A2 P2 T2 B2
A1 P1 T1 B1
A
A2 P2 T2 B2
A1 P1 T1 B1
B
A2 P2 T2 B2
A1 P1 T1 B1
C
A2 P2 T2 B2
A1 P1 T1 B1
D
A2 P2 T2 B2
A1 P1 T1 B1
AB
A2 P2 T2 B2
A1 P1 T1 B1
PT
Technical Data
3
HA 5018
Valve Dimensions Dimensions in milimeters (inches)
3
1
2
7
4
5
6
0 5 10 15 20 25 30 35 40 45 50
(2.64) (5.28) (7.92) (10.56) (13.2)
(14.5)
(29,0)
(43.5)
(58,0)
(72.5)
(87,0)
(101.5)
0,5
3
5
1,5
Pressure drop Dp [bar (PSI)]
Flow Q [L/min (GPM)]
Required surface finish
of interface
Dimensions in millimeters (inches):
1 Name plate
2 4 mounting through-holes
3 Seal kit, supplied with valve
40,5 (1.594)
27,8 (1.094)
19 (0.748)
10,3 (0.405)
12,5(0.492)
6(0.236)
16,3 (0.641)
26,6 (1.047)
32,5 (1.280)
44 (1.732)
31 (1.220) 0,75 (0.03)
40 (1.575)
64 (2.520)
4x 5,4 (0.213)Æ
A2 B2
P2
T2
5,75 (0.226)
7,5(0.295)
TRHOUGHT
1
3
2
Dp-Q Characteristics Measured at n = 32 mm
2
/s (156 SUS)
Pressure drop Dp related to flow rate.
[
[
[
[
in
mm
0,8(32)
Rmax 6,3(248) ([]mm
m in)
0.01 / 100
0.0004 / 4.0
4
HA 5018
Spare Parts Dimensions in millimeters (inches)
Caution!
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
Tel.: +420-499-403 111,
E-mail:
info.cz@argo-hytos.com
www.argo-hytos.com
The packing foil is recyclable.
The protective plate can be returned to manufacturer.
Mounting bolts M5 must be ordered separately. Tightening torque of the bolts is 8.9 Nm.
The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.
Seal kit
Type
Dimensions, quantity
Order number
O-Ring Square Ring
Standard NBR70 - 9,25 x 1,68 (4 pcs.) 28551800
Viton 9,25 x 1,78 (4 pcs.) - 28551900
