1
Functional Description
The RPEL1-04 directional control valves consist of cast
iron housing (1), control spool (5) with two centering
springs (4) and operating solenoids (2, 3).
The three-position directional valves are fitted with two
solenoids and two springs. Two-position directional
valves have either one solenoid and one return spring or
two solenoids and a detent assembly.
The operating solenoids are DC solenoids supplied
through connectors A, B (6, 7). For AC supply the
solenoids are provided with a rectifiers which are
integrated in the DIN connector socket as part of the
solenoid. By loosening the nut (8), the solenoid can be
turned around its axis up to 360°.
In the case of solenoid malfunction or power failure, the
spool of the valve can be repositioned by manual
override (9), provided the pressure in the T-port does not
exceed 25 bar (363 PSI).
The valve housing (1) is phosphate coated and the
solenoids (2, 3) are zinc coated.
b
a
HA 4037
05/2014
Size 04 (D 02) · 250 bar (3600 PSI) · 30 l/min (8.0 GPM)
Solenoid - Operated Directional
Control Valves
RPEL1-04
q
4/3-, 4/2- and 3/2-way directional control valves
with solenoid control
q
Solenoids can be turned around their axis to any
position
q
Push button manual override
q
Installation dimensions acording
to ISO 4401 CETOP - RP 121H
q
Subplates see data sheet HA 0002
2
HA 4037
Seals
No designation NBR
V FPM (Viton)
Rated supply voltage of solenoids
(at the coil terminals)
12 V DC / 1,83 A
01200
24 V DC / 0,92 A 02400
*205 V DC / 0,08 A 20500
Other voltages per request
Functional symbols
see the table functional symbols
Nominal size
Solenoid Operated
Directional Control Valve
Number of valve positions
two positions
2
three positions 3
Ordering Code
Type of the solenoid coil
E1 with the connector to EN 1745301-803-A
E2 with the integrated quenching diode and
the connector to EN 1745301-803-A
E3 with the connector AMP-Junior-Timer 2 PIN
E4 with integrated quenching diode and
the connector AMP-Junior-Timer 2 PIN
E12 with the connector Deutsch DT04-2P
E13 with integrated quenching diode and
the connector Deutsch DT04-2P
For selection of the solenoid coil and the terminal box type
use catalogue HA 8007.
Voltage of Recommended solenoid coils used with electrical connector with rectifiers - see page 3
Rated supply source voltage
(permissible rated voltage variation ±10 %)
Type designation of the solenoid voltage
230 V AC / 0.20 A / 50 (60) Hz 20500
RPEL1-04 /
Technical Data
Nominal size mm(US) 04 (D 02)
Maximum flow l/min (GPM) see p-Q characteristics
Maximum operating pressure at ports P, A, B bar (PSI) 250 (3600)
Maximum operating pressure at port T bar (PSI) 100 (1450)
Pressure drop bar (PSI) see Dp-Q characteristics
Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524
Fluid temperature range (NBR / Viton) °C (°F) -30 ... +80 (-22 ... +176 ) / -20 ... +80 ( -4 ... +176 )
Ambient temperature, max. °C (°F) +50 (+122)
Viscosity range mm
2
/s (SUS) 20 ... 400 (98 ... 1840)
Maximum degree of fluid contamination Class 21/18/15 to ISO 4406 (1999)
Maximum allowable voltage variation % AC: ±10 DC: ±10
Coil design see HA 8007
C14B
Maximum switching frequency 1/h 15 000
Switching time, ON; at n = 156 SUS (32 mm
2
/s) ms 30 ... 50
Switching time, OFF; at n = 156 SUS (32 mm
2
/s) ms AC: 70 ... 100 DC: 30 ... 50
Duty cycle % 100
Service life cycles 10
7
Enclosure type to EN 60 529
E1; E2 E3A; E4A E12; E13
IP 65 IP 65 IP 67; IP 69
Weight - valve with 1 solenoid
- valve with 2 solenoid
kg (lbs)
0,75 (1.65)
0,9 (1.98)
Mounting position unrestricted
3
HA 4037
Functional Symbols
Type Symbol Crossover
Type Symbol Crossover
Note:
* Coil version 205 are suitable for the rectified voltage of 230V /50Hz, Rectifier in coil included
Other designs available at request.
Coils C14B
Type Ordering number
Nominal
voltage
Nominal
current
Connector
12 VDC 1,83 A E1 - EN 175301-803-A C14B-01200E1-6,55NA 16210300
24 VDC 0,92 A E1 - EN 175301-803-A C14B-02400E1-26,2NA 16210400
205 V DC* 0,08 A E1 - EN 175301-803-A C14B-20500E1-2476NA 16210500
12 VDC 1,83 A E2 - E1 with quenching diode C14B-01200E2-6,55NA 24101600
24 VDC 0,92 A E2 - E1 with quenching diode C14B-02400E2-26,2NA 24101800
12 VDC 1,83 A E3A - AMP Junior Timer (2 pins; male) C14B-01200E3A-6,55NA 28822500
24 VDC 0,92 A E3A - AMP Junior Timer (2 pins; male) C14B-02400E3A-26,2NA 28686400
12 VDC 1,83 A E4A - E3A with quenching diode C14B-01200E4A-6,55NA 28822600
24 VDC 0,92 A E4A - E3A with quenching diode C14B-02400E4A-26,2NA 28822400
12 VDC 1,83 A E12 - Deutsch DT04-2P C14B-01200E12-6,55NA 29268200
24 VDC 0,92 A E12 - Deutsch DT04-2P C14B-02400E12-26,2NA 29268900
12 VDC 1,83 A E13 - E12 with quenching diode C14B-01200E13-6,55NA 29268800
24 VDC 0,92 A E13 - E12 with quenching diode C14B-02400E13-26,2NA 29269000
E12, E13
Deutsch DT04-2P
Protection degree IP67, IP69
41,3(1.626)
20(0.787)
13,4
30(1.181)
(0.528)
30(1.181)
34,1(1.354)
41,3(1.626)
13,4(0.528)
41,3(1.626)
30(1.181)
39,3 (1.547)
13,4(0.528)
Connector design
E1, E2
EN 175301-803-A
Protection degree IP65
E3A, E4A
AMP Junior Timer
Protection degree IP65
Dimensions of Coils C14 Dimensions in millimeters (inches)
4
HA 4037
Z11 C11 H11 Y11 R11 X11 Z51 C51 H51 Y51
P-A131122 3
P-B1311221 11
A-T1311221 11
B-T131122 3
P-T 2 2 2
Dp-Q Characteristic Measured at n = 32 mm
2
/s (156 SUS) and t = 40 °C ( 104 °F)
Pressure drop Dp related to flow rate.
Pressure drop Dpinbar(PSI)
Flow Q in l/min (GPM)
p-Q Characteristic Measured at n = 32 mm
2
/s (156 SUS) and t = 40 °C (104 °F)
Operating limits for maximum hydraulic power transferred by the directional valve. For respective spool type - see spool
symbols.
3
2
1
4
Operating pressure p in bar( PSI)
Flow Q in l/min (GPM)
Z11 C11 H11 Y11 R11 X11 Z51 C51 H51 Y51
1413221413
3
2
1
5
HA 4037
a
a
b
b
80 (3.149)
43 (1.692)
40 (1.575)
27 (1.063)
20 (0.787)
9(0.354)
5,3 (0.209)
5,3 (0.209)
10,8 (0.425)
1.4 (0.055)
127 (4.5)
7 (0.276)
92 (3.622)
30 (1.181)
59 (2.323)
61 402(2. )
3 7 1 5 2 7 3
9
8
4
a
b
22,5 (0.886)
20,25 (0.797)
11,25 (0.443)
0.75 (0.030)
59 (2.323)
61 402(2. )
3 (0.118) deep 5 (0.197)
24 (0.945)
24 (0.945)
26.5(1.043)
19,7 (0.776)
12 (0.472)
4,3 (0.169)
36 (1.417)
18.5(0.728)
2.25 (0.089)
4
.7
5
(
0
.1
8
7
)
6
Valve Dimensions Dimensions in millimeters and inches
Valve with two solenoids
Valve with one solenoid
b
Spool symbols X11, Z11, C11, H11,
Y11
[
[
[
[
in
mm
0,8(32)
Rmax 6,3(248) ([]mm
m in)
0.01 / 100
0.0004 / 4.0
Required surface finish of
interface
1 Solenoid a
2 Solenoid b
3 Manual override
4 Name plate
5 Square ring 7.65 x 1.68 (4 pcs.)
supplied with valve
6 4 mounting holes
7 Retaining nut of the solenoid 3+1Nm (2.2+0.7 Ibf-ft)
8 Electrical connector, EN1745301-803-A
9 Space required to remove connector
Valve with one solenoid a
Spool symbols R11, Z51, C51, H51,
Y51
6
HA 4037
Subject to alteration without notice!
ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí
tel.: +420-499-403 111
e-mail: info.cz@argo-hytos.com
www.argo-hytos.com
Caution!
For directional valves with two solenoids, one solenoid must be without power before the other solenoid can be
powered. Switching time for directional valves with detent assembly (impulse control)
should not be shorter than 60 ms.
Other functional symbols on request.
The packing foil is recyclable.
Mounting bolts M5 x 35 EN 1745301-803-A or studs must be ordered separately.
Tightening torque of the bolts is 5+2 Nm (3.7+1.5 lbf-ft ).
The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.
Electrical connector, EN 1745301-803-A
Type
designation
Model
Max. input
voltage
Connector A
Gray
Connector B
Black
Ordering number (kit)
K1
without rectifier - M16x1.5,
bushing bore Æ 0.24-0.31 in (Æ 6-8 mm)
230 V AC/DC 16202200 16202100
K2
without rectifier with LED and quenching
diode - M16x1.5,
bushing bore Æ 0.24-0.31 in (Æ 6-8 mm)
12...24 V DC 16202800 16202700
K3
with rectifier - M16x1.5,
bushing bore Æ 0.24-0.31 in (Æ 6-8 mm)
230 V AC 16202400 16202300
K4
with rectifier with LED and quenching
diode - M16x1.5,
bushing bore Æ 0.24-0.31 in (Æ 6-8 mm)
230 V AC 16203000 16202900
K5
without rectifier - M16x1.5,
bushing bore Æ 0.16-0.24 in (Æ 4-6 mm)
230 V AC/DC 16202600 16202500
Seal kit
Type
Dimensions, quantity
Ordering number (kit)
Square ring O-ring
Standard NBR70 7,65 x 1,68 (4 pcs) 16 x 2 (2 pcs) 15873800
Viton 7,65 x 1,78 (4 pcs) 16 x 2 (2 pcs) 15874400
Mounting bolts (kit)
Dimensions, number Bolt torque Ordering number (kit)
M5 x 35 DIN 912-10.9 (4 pcs) 5+2 Nm (3.7+1.5 lbf-ft ) 15874600
a
35
3
1
2
4
1 Solenoid coil - see coils table
2 Nut with seal
3 Electrical connector
4 Seal kit
5 Mounting bolts
Spare Parts
