The RPE3-04 directional control valves consist of cast

iron housing (1), control spool (5) with two centering

springs (4) and operating solenoids (2, 3).

The three-position directional valves are fitted with two

solenoids and two springs. Two-position directional

valves have either one solenoid and one return spring or

two solenoids and a detent assembly.

The operating solenoids are DC solenoids supplied

through connectors A, B (6, 7). For AC supply the

solenoids are provided with a rectifiers which are

integrated in the DIN connector socket as part of the

solenoid. By loosening the nut (8), the solenoid can be

turned around its axis up to 360°.

In the case of solenoid malfunction or power failure, the

spool of the valve can be repositioned by manual

override (9), provided the pressure in the T-port does not

exceed 25 bar (363 PSI).

The valve housing (1) is phosphate coated and the

solenoids (2, 3) are zinc coated.

HA 4014

09/2013

Directional Control Valves

Solenoid Operated

RPE3-04

Replaces

HA 4014 10/2010

4/3-, 4/2- way directional control valves

with solenoid control

Solenoids can be turned around their axis to any

position

Push button manual override

Installation dimensions acording to

DIN 24 340 / ISO 4401 / CETOP

RP121-H

Subplates see data sheet HA 0002

CSA Upon request

Functional Description

Size 04 (D 02) · 320 bar (4600 PSI) · 30 L/min (8.0 GPM)

HA 4014

Ordering Code

RPE3-04 /

Nominal size 04(D02)

Solenoid Operated

Directional Control Valve

Number of valve positions

two positions

three positions 3

Seals

no designation NBR

V FPM (Viton)

Orifice in P-Port

no designation without orifice

D1 Æ0.8 mm (0.031 in)

D2 Æ1.0 mm (0.039 in)

D3 Æ1.2 mm (0.047 in)

D4 Æ1.5 mm (0.059 in)

D5 Æ0.7 mm (0.027 in)

Manual override

no designation standard

N2 covered with rubber protective boot

*Electrical connector, EN 1745301-803

no designation without connector

K1 connector without rectifier

K2 connector without rectifier with LED

and quenching diode

K3 connector with rectifier

K4 connector with rectifier with LED

and quenching diode

K5 connector without rectifier

FOR PREFERRED TYPES SEE BOLD TYPING IN ORDERING CODE, FUNCTIONAL SYMBOLS

AND TABLE OF PREFERRED TYPES ON PAGE 8

Rated supply voltage of solenoids

(at the coil terminals)

12 V DC / 2.41 A

01200

14 V DC / 1.66 A 01400

21 V DC / 1.14 A 02100

24 V DC / 1.16 A 02400

42 V DC / 0.59 A 04200

48 V DC / 0.56 A 04800

60 V DC / 0.41 A 06000

102 V DC / 0.24 A 10200

205 V DC / 0.12 A 20500

24 V AC / 1.44 A / 50 (60) Hz 02450

115V AC / 0.26 A / 50 (60) Hz 11550

230 V AC / 0.14 A / 50 (60) Hz 23050

The AC coils correspond with E5 type.

Type of solenoid coil

E1 with terminal for the connector, EN 1745301-803

E2 with terminal for the connector, EN 1745301-803

and quenching diode

E3 with AMP-Junior-Timer-connectorr

E4 with AMP-Junior-Timer-connectorr and quenching diode

E5 with integrated rectifier and with terminal

for the connector, EN 1745301-803

Other coils on demand see catalog HA 8007

Functional symbols

see the table functional symbols

Recommended solenoid coils used with electrcial connector with rectifiers - type designation K3, K4

Rated supply source voltage

(permissible rated voltage variation ±10 %)

Type designation of the solenoid voltage

24 V AC / 1.44 A / 50 (60) Hz 02100

115 V AC / 0.26 A / 50 (60) Hz 10200

230 V AC / 0.14 A / 50 (60) Hz 20500

Note: Electrical connectors have to be ordered separately. See see pages 6 and 8.

RPE3-04 /

CSA Upon request

HA 4014

Technical Data

Valve size mm (US) 04 (D 02)

Maximum flow L/min (GPM) see p-Q characteristics

Maximum operating pressure at ports P, A, B bar (PSI) 320 (4600)

Maximum operating pressure at port T bar (PSI) 210 (3045)

Pressure drop bar (PSI) see Dp-Q characteristics

Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524

Fluid temperature range (NBR / Viton) °C (°F) -30 ... +80 (-22 ... +176) /-20 ... +80 (-4 ... +176)

Ambient temperature, max. °C (°F) +50 (122)

Viscosity range mm

/s (SUS) 20 ... 400 (98 ... 1840)

Maximum degree of fluid contamination Class 21/18/15 to ISO 4406

Maximum allowable voltage variation % AC: ±10 DC: ±10

Maximum switching frequency h

-1

15 000

Switching time, ON; at n = 156 SUS (32 mm

/s) ms 30 ... 50

Switching time, OFF; at n = 156 SUS (32 mm

/s) ms AC: 70 ... 100 DC: 30 ... 50

Duty cycle % 100

Service life cycles 10

Enclosure type to EN 60 529 IP 65

Weight - valve with 1 solenoid

- valve with 2 solenoid

kg (lbs)

0.9 (1.978)

1.25 (2.747)

Mounting position unrestricted

Spool Symbols

Type Symbol Crossover

HA 4014

p-Q Characteristic Measured at n = 32 mm

/s (156 SUS)

Operating limits for maximum hydraulic power transferred by the directional valve. For respective spool type - see spool

symbols.

Operating pressure p [bar (PSI)]

Flow Q [L/min (GPM)]

Z11 C11 H11 P11 Y11 L21 B11 Y71 R11 R21 A51 P51 Y51 C51 Z51 X11 J15 J75

121114151341121114

Dp-Q Characteristic Measured at n = 32 mm

/s (156 SUS)

Pressure drop Dp related to flow rate.

Z11 C11 H11 P11 Y11 L21 B11 Y71 R11 R21 A51 P51 Y51 C51 Z51 X11 J15 J75

P-A13111112221 3 221

P-B1311111 22111 1221

A-T1311111222 11 122

B-T1311111122 3 22

P-T 2 2 2

Flow Q [L/min (GPM)]

Pressure drop Dp [bar (PSI)]

HA 4014

Valve Dimensions Dimensions in millimeters (inches)

(

)

(

)

2.25 (0.089)

22,5 (0.886)

20,25 (0.797)

11,25 (0.443)

0.75 (0.030)

66 (2.598)

61 402(2. )

193 (7.598)

3 (0.118) deep 5 (0.197)

24 (0.945)

26.5(1.043)

19,7 (0.776)

12 (0.472)

4,3 (0.169)

37,5 1.476()

36 (1.417)

12 (0.472)

86 (3.386)

50 (1.969)

40 (1.575)

27 (1.063)

20 (0.787)

9(0.354)

5,3 (0.209)

10,8 (0.425)

1.4 (0.055)

134 (5.276)

7 (0.276)

18.5(0.728)

Valve with one solenoid a

Spool symbols R11, R21, A51, P51,

Y51, C51, Z51

Valve with one solenoid b

Spool symbols Z11, X11, C11, H11

1 Solenoid a

[(Nut torque 2.21 ft-lbs. (3Nm)]

2 Solenoid b

[(Nut torque 2.21 ft-lbs. (3Nm)]

3 Manual override

4 Name plate

5 Square ring 7.65 x 1.68 (4 pcs.)

supplied with valve

6 4 mounting holes

7 Retaining nut of the solenoid

8 Electrical connector,

DIN EN1745301-803

9 Space required to remove connector

[

0,8(32)

Rmax 6,3(248) ([]mm

m in)

0.01 / 100

0.0004 / 4.0

Required surface finish of

interface

37 1 5

273

Valve with two solenoids

27,3 (1.074)

40,3 (1.586)

HA 4014

16.1 (0.634)

22.3 (0.878)

Type of the Solenoid Coil

Type Dimensions Description

Solenoid coil with terminal for the electrical

connector, EN 1745301-803

Solenoid coil with integrated quenching

diode (bipolar transil diode) and terminal for

the electrical connector, EN 1745301-803

Solenoid coil with terminal for

AMP-Junior-Timer electrical connector.

Solenoid coil with integrated quenching

diode (bipolar transil diode) and terminal for

AMP-Junior-Timer electrical connector.

Solenoid coil with integrated rectifier and

terminal for the electrical connector,

EN 1745301-803

Electrical connector, EN1745301-803

47(1.850)

35(1.378)

42(1.654)

30(1.181)

STANDARD RUBBER BOOT

no designation

Dimensions

Standard model of manual override.

Standard retaining nut of the solenoid.

Manual override protected by rubber boot.

Manual override

Type N2

Dimensions

Connector B (black)

without rectifier - M16x1.5

( bushing bore Æ 6-8 mm)

230 V AC/DC

Connector A (grey)

Connector B (black)

without rectifier - M16x1.5

( bushing bore Æ 4-6 mm)

230 V AC/DC

Connector A (grey)

Connector B (black) without rectifier with LED

and quenching diode - M16x1.5

( bushing bore Æ 6-8 mm)

12 ... 24 V DC

Connector A (grey)

Connector B (black)

with rectifier - M16x1.5

( bushing bore Æ 6-8 mm)

230 V AC

Connector A (grey)

K4 Connector B (black)

with rectifier with LED

and quenching diode - M16x1.5

( bushing bore Æ 6-8 mm)

230 V AC

HA 4014

Orifice in P-Port

Type ÆD mm (inch)

P-port orifices limits the flow into the

directional control valve.

Attention:

When the orifice in P port is

additionally mounted the standard

used square ring NBR is replaced

with O-ring from Viton.

0,8 (0.032)

1,0 (0.040)

1,2 (0.047)

1,5 (0.059)

0,7 (0.028)

Spare Parts

Seal ring

* CSA Upon request

1 Solenoid coil

2 Retaining nut with seal

3 Electrical connector

4 Orifice in P-port with seal

5 Seal kit

6 Mounting bolts

Solenoid coil

Type designation

Type of the coil

E1 E2 E3 E4 E5

Ordering number

01200 27316600 27631400 27330200 27631600

*01200 24140700

02400 27316700 27632400 27449700 27633400

*02400 24140800

20500 27382400 - - -

23050 27449900

*23050 24141000

Solenoid retaining nut with seal

Type of the nut

Seal ring Ordering number

Standard nut

18 x 1.5

15874500

Nut with rubber boot 15874800

HA 4014

Caution!

Subject to alteration without notice!

ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí

Tel.: +420-499-403 111

E-mail: info.cz@argo-hytos.com

www.argo-hytos.com

Electrical connector, EN 175301-803

Type

designation

Connector A

grey

Connector B

black

Ordering number

K1 16202200 16202100

K5 16202600 16202500

K2 16202800 16202700

K3 16202400 16202300

K4 16203000 16202900

Orifice in P-Port

Type designation ÆD mm (in) Seal ring Ordering number

D1 0.8 (0.031)

7.65 x 1.78

15874000

D2 1.0 (0.039) 15874100

D3 1.2 (0.047) 15874200

D4 1.5 (0.059) 15874300

D5 0.7 (0.027) 15874900

Seal kit

Type

Dimensions, number

Ordering number

Square ring O-ring

Standard NBR70 7.65 x 1.68 (4 pcs.) 16 x 2 (2 pcs.) 15873800

Viton 7.65 x 1.78 (4 pcs.) 16 x 2 (2 pcs.) 15874400

Mounting bolts

Dimensions, number Tightening torque Ordering number

M5 x 35 DIN 912-10.9 (4 pcs.) 5 Nm (3.68 Ibf . ft) 15874600

Preferred Types of Valves

Type Ordering number Type Ordering number

RPE3-042Z11/01200E1 16711100 RPE3-042R11/02400E1 15855300

RPE3-043Z11/01200E1 15849000 RPE3-042R21/02400E1 15855700

RPE3-043C11/01200E1 15849900 RPE3-042A51/02400E1 15855200

RPE3-043H11/01200E1 15850300 RPE3-042Y51/02400E1 15855100

RPE3-043Y11/01200E1 15850500 RPE3-042J15/02400E1 15856600

RPE3-042R11/01200E1 15851900 RPE3-042Z11/23050E5 21714900

RPE3-042R21/01200E1 16711000 RPE3-043Z11/23050E5 16712400

RPE3-042A51/01200E1 16710900 RPE3-043C11/23050E5 16712700

RPE3-042Y51/01200E1 15851800 RPE3-043H11/23050E5 15858800

RPE3-042J15/01200E1 16711400 RPE3-043Y11/23050E5 16712500

RPE3-042Z11/02400E1 15855900 RPE3-042R11/23050E5 15859100

RPE3-043Z11/02400E1 15852200 RPE3-042R21/23050E5 21764800

RPE3-043C11/02400E1 15852800 RPE3-042A51/23050E5 16712600

RPE3-043H11/02400E1 15853200 RPE3-042Y51/23050E5 21785500

RPE3-043Y11/02400E1 15853600 RPE3-042J15/23050E5 21785600



When the distributor contains two electromagnets any of the two electromagnets can be switched on only after the

other one switches off. The electromagnets switching time on distributors with locking arrangement must not be

shorter than 60 ms.



Distributors with other interconnections than those shown in the catalogue can be supplied on request.



The packaging foil can be recycled



The transport base plate can be returned to the manufacturer.



Mounting screws M5 x 35 DIN 912-10.9 or bolts must be ordered separately.

The screws tightening torque is 5 Nm (3.68 Ibf . ft).



The mentioned data only serve to describe the product and in no case are to be understood in terms of law as

guaranteed characteristics.