Sandwich Plates for Valves
SB-04(06)
HA 0028
5/2012
Sandwich plates for vertical grouping
Choice of channels interconnection
Selection of 3/4-16UNF, 7/8-14UNF cavities
Connection patterns of clear opening of size 04, 06
(D02, D03) in accordance with ISO standards
Size 04, 06 (D02, D03) • p
max
350 bar (5075 PSI)
- - -
SB
Nominal Size
(D02) 04
(D03) 06
Cavity
Valve 2/2 ... 3/4-16UNF* only 04 (D02) A2
Valve 3/2 ... 3/4-16UNF* only 04 (D02) A3
Valve 2/2 ... 7/8-14UNF* only 06 (D03) B2
Valve 3/2 ... 7/8-14UNF* only 06 (D03) B3
Number of valves in Sandwich Plates 1
2
Functional Symbols
see Functional symbols side 2 a 3
Body Material
G GG30 (350 bar)
Surface treatment
Z Zinc coated
Seals
V FPM (Viton)
Sandwich Plates
for Valves
The sandwich plates are used for assembly of built-in
two way and tree way valves in hydraulic circuits. The
cast iron sandwich plate allows mounting of one or two
valves with 3/4-16-UNF thread, or in case of nominal in-
side diameter size 06 also with the 7/8-14-UNF thread.
Through-way channels P, T, A, B in the vertical direction
allow so called vertical grouping. By assembling the
sandwich plates with the valves in the vertical direction
more complex hydraulic control circuits are created.
Top sandwich plate is closed by a cover plate or by a
valve with a body, l.g. directional control valve.
In the basic finish the sandwich plates are zinc coated.
*See Cavity datasheet HA 0019
1