24 Return to Table of Contents V20.1
✓ Shuttle valve senses the greater of two pressures
✓ Sizes 16mm-63mm: ships with standard D03 interface
✓ Sizes 50mm-63mm: D05 interface option available
✓ Size 80mm: ships with standard D05 interface
✓ Standard orifice installed in P
✓ Removable orifice plug options
Applications
On/Off Valve
Will hold valve closed in one condition and
will allow valve to open in the other
condition.
Senses the greater of two pressures between
the X port & the A port. The X port should
be connected to the B port (side of logic
valve), & the Z1 port should be connected
to the A port (nose of logic valve).
By using a standard D03/D05 directional
control with flow from P to A in the de-
energized condition, the shuttle will use the
greater pressure to hold the valve closed.
Energizing the solenoid vents the pressure
above the valve insert to the drain. Flow can
travel freely from A to B or from B to A as
long as the spring force is overcome.
B to Z2 allows control of additional valve.
DIN 24342 COVER
FOR DIRECTIONAL CONTROL
SIZES 16mm TO 80mm
5000 PSI
25 Return to Table of Contents V20.1
General Layout
Sizes 16mm to 63mm with D03 Sizes 50mm to 63mm with D05 (80mm not shown)
50mm only: D03 rotated 90° CW from above image
Cover
Size
A
B
C
Interface
Threads in X, Z1,
& AP
*Orifice Size
in P
Bolts
16 mm
3.00”
2.50”
0.44”
D03
1/4-20 UNC (X, Z1)
1/16” NPT (AP)
1.0 mm
5/16-18 X 2.50” (4)
25 mm
3.50"
2.00"
1.03”
D03
1/16-27 NPT
1.2 mm
1/2-13 X 2.00" (4)
32 mm
4.00"
2.00"
0.78”
D03
1/16-27 NPT
1.3 mm
5/8-11 X 2.00" (4)
40 mm
5.00"
2.40"
0.71"
D03
1/16-27 NPT
1.5 mm
3/4-10 X 2.50" (4)
50 mm
5.55"
2.75"
0.29"
D03/D05
1/16-27 NPT
1.8 mm
3/4-10 X 3.00" (4)
63 mm
7.00"
3.38"
0.71"
D03/D05
1/8-27 NPT
2.0 mm
1-1/4-7 X 3.50" (4)
80 mm
9.50”
3.50"
0.71"
D05
1/8-27 NPT
2.5 mm
1-8 X 4.00" (8)
*Only one orifice installed in P port of D03/D05 interface. Other orifices are optional.
Order Code
AMT-PDSH5-**-**-**
Almo
Manifold
& Tool
Poppet Cover w/
Directional
Control Interface
& Shuttle Function
Version #5
Size: 16, 25, 32, 40, 50, 63, or 80mm
Custom Orifice Size in
“mm” if other than
Standard Size
Examples: 08 = 0.8 mm
10 = 1.0 mm
12 = 1.2 mm
BL= Include bolts at extra
charge
Blank= Customer will supply
bolts
