✓ Same as the PDBASH with D03
rotated 90 degrees to match industry
standard
✓ Removable orifice plug options
✓ Ships standard as plug option #1
Applications
Dump Valve or ON/OFF valve
Can be used as a dump valve
by Connecting X to the B port
(side of logic valve) &
connecting Y to drain. The
diagrams to the right show the
two different plug options.
Plug option #1 will allow the
valve to dump in the de-
energized state, & Plug option
#2 will allow the valve to
dump in the energized state.
Note: If port A is connected to a working port,
then connecting X to the B port, as shown above,
does not prevent pressure at A from overcoming
the forces acting to keep the valve closed. Flow
could occur from A to B. To prevent this, use a
separate pilot pressure for X.