30 Return to Table of Contents V20.1
✓Relief accessory for AMT-PRC-**-L relief covers
✓Adjustable relief setting from 150 psi to 5000 psi
✓Standard screw adjustment for relief setting
✓Pressure at T is directly additive to relief setting
Applications
High/Low Pressure Relief Valve
This D03 relief accessory can be combined with an AMT-PRC-**-L
to create a high/low relief valve with two independent relief settings.
Using a standard directional control with flow from P to A in the de-
energized condition will select the relief setting of the cover.
Energizing the pilot valve will switch the relief setting to the
accessory.
Note: The relief setting of the accessory MUST be lower than the
setting of the cover.
The Y pilot can be connected to the B port of the logic valve, but a
separate drain connection is preferred. This configuration uses a 1:1
ratio logic valve.