Mounting subplates type BA-243
modular execution
Table TK280-0/E
Each unit is supplied with appropriate caps, O-rings and tie rods as indicated in the table on the right
For all tie rods : M8x*** tightening torque = 22 Nm
Optional directional valve for venting is shown with dotted line.
BA-243/BTBA-243/M/*** BA-243/MP/***
G 1/2” G 1/2”
G 1/2”
G 3/8”
G 1/4”
G 3/8” G 3/8”
G 1/2”
G 1/2”
G 1/2”
G 1/2”
G 1/2”
G 1/2”
G 3/8”
Basic element:
A = Intermediate element
B = basic element
M = basic element with double stage pressure relief valve
MP = basic element with direct pressure relief valve
BA-243/1 M8x80
BA-243/2 M8x138
BA-243/3 M8x186
BA-243/4 M8x234
BA-243/5 M8x282
BA-243/6 M8x330
BA-243/7 M8x378
BA-243/8 M8x426
BA-243/9 M8x474
BA-243/10 M8x522
Subplate Tie-rod
BA-243: for ISO 4401
size 06 valves
Number of intermediate elements
type BA-***/A
Closing element:
T = BA-***/T BT = BA-***/BT
Calibration range
for BA-243/M: 100, 210, 350
for BA-243/MP: 15, 75, 150, 250
1
MODULAR SUBPLATES
ISO 4401 size 06
FUNCTIONAL LIMITS
– units BA-243 are designed to stack a
maximum of 10 intermediate (/A)
elements
– Qmax on uses A-B = 70 l/min
– Qmax on lines P-T = 100 l/min
– Pmax up to 4 elements = 350 bar
– Pmax 5 to 10 elements = 250 bar
For the valve connection surface (BA-243/A), see figure on side 1
but without ports X and Y (ISO 4401-03-02-0-05)
Version with directional valve for venting:
10 =1 setting; venting with de-energized solenoid
Optional:
suffix for directional valve for
venting, see table C045
Optional:
V = with setting adjustment by handwheel
(only for versions /M and /MP)
/
UNIT ELEMENTS
BA-243/B: basic element with 1/2” P
and T ports on the base, rear ports with
P 3/8” and T 1/2”.
BA-243/M/***: basic element with dou-
ble stage pressure relief valve; base
and rear P and T ports 1/2”.
It can be supplied also with
handwheel:
BA-243/M/***/V
BA-243/MP: basic element with direct
operated pressure relief valve; base
and rear P and T ports 1/2”.
It can be supplied also with
handwheel:
BA-243/MP/***/V
BA-243/A: intermediate element for
ISO 4401 size 06 valves assembly; rear
3/8” A and B ports.
BA-243/T: closing element with 1/4”
manometer port.
BA-243/BT: terminal element with 1/2”
P and T ports on top side, rear 3/8” P
and 1/2” T ports.
BA-243/TBA-243/B BA-243/A
G 1/2”
02/15
The subplates series BA-243 are modular elements for installation of directional and modular valves size 06.
Each element provides: P and T passing though lines, A and B user ports and the valve mounting surface. Up to 10 elements can be
stacked by means of tie rods, composing multi-station manifolds with valves connected in parallel.
The subplates are available in different configurations also with integral pressure relief valves.
*
Seals material:
- =
NBR
PE = FKM
BA - 243 3 T M * 350 * *
/-///- /
