16 160/200 60/180 130/180 130/180 32 25 16 22,5 43 56 54 42,5 20 2 2 0,03 0,05
25
270/400 300/430 300/430 300/430 45 34 25 27 58 72 70 57 30 2,5 2,5 0,03 0,05
32
540/670 480/670 480/670 480/670 60 45 32 38,5 70 85 83 68,5 30 2,5 2,5 0,03 0,1
40
840/1200 940/1400 940/1400 940/1400 75 55 40 54,5 87 105 102 84,5 30 3 3 0,05 0,1
50
2200 1500/2200 1500/2200 1500/2200 90 68 50 62,5 100 122 117 97,5 35 3 3 0,05 0,1
63
3500 2200/3500 2200/3500 2200/3500 120 90 63 87 130 155 150 127 40 4 4 0,05 0,2
80
5400 - - 4000/5600 145 110 80 130,5 175 205 200 170,5 40 5 5 0,05 0,2
Atos spa
21018 Sesto Calende, Italy - Fax 0331 920005
Cartridge valves type LI
ISO 7368 size 16 ÷ 80
Table H003-11/E
Modular cartridge valves realize pres-
sure, flow, directional and check con-
trols and are composed by a 2-way
cartridge housed in a recess of stan-
dard dimensions and by a closing
functional element ➀ called “cover”.
The cartridge is composed by an
hydraulically piloted poppet ➁ sliding
into a drilled sleeve ➂; spring ➃ keep
the poppet closed in resting position.
Poppet is hydraulically piloted by
means of internal connections in the
cover (X, F, Z1, Z2, Y). External pilot
line can operate directly or by means
of solenoid valve or pressure relief val-
ves housed in the cover.
Many different covers are available,
each providing a different function to
realize a complete range of valves and
allow the development of any elec-
trohydraulic circuit for the control of
machines and systems, see section
쪪
,
쪫
,
쪬
,
쪭
.
Poppets may have different geometri-
cal shapes and area ratios as descri-
bed in section
쪮
, to optimize pressure,
flow and directional controls.
These valves are available in standard
sizes 16 to 80 according to ISO 7368
(DIN 24342).
Flow up to 5600 l/min at ∆p = 6 bar,
pressure up to 350 bar.
Atos also realizes integrated electrohy-
draulic blocks customized to the appli-
cation by combining ISO components
and cartridge valves within compact
functional manifolds.
Proportional cartridge valves are also
available, see tab. F300 to F340.
H003
LI MHA -2 /210 - IX 24DC ** /* X**
Pressure range control (only for LIM*, LIRA, LICM):
50 = 6 ÷ 50 bar;
100 = 8 ÷ 100 bar;
210 = 10 ÷ 210 bar;
350 = 15 ÷ 350 bar;
3 HYDRAULIC CHARACTERISTICS AND RECESS DIMENSIONS
H003
LIDD
LIDEW4
Pilot solenoid valve options:
-IX = solenoid OI for AC and DC supply
Supply voltage, see table E010
Cover according
to ISO 7368
Function and type of control
see section
쪪
,
쪫
,
쪬
,
쪭
.
Size:
1 = 16 3 = 32 5 = 50 8 = 80
2 = 25 4 = 40 6 = 63
Special orifices setting
Design number
Synthetic fluid:
WG = water glycol
PE = phosphate ester
Spring cracking pressure, see the specific valve tables
for the available cracking pressure:
1 = 0,3 bar 4 = 4 bar
2 = 1,5 bar 6 = 5,5 bar
3 = 3 bar 7 = 7 bar
Cartridge according to
ISO 7368
Size, the same of relevant cover:
16 = 16 40 = 40 80 = 80
25 = 25 50 = 50
32 = 32 63 = 63
see section
쪮
Type of poppet: see section
쪮
Design number
Synthetic fluid:
WG = water glycol
PE = phosphate ester
1 MODEL CODE FOR COVERS
2
MODEL CODE FOR CARTRIDGES
Pressure Flow Direction Check
ø d3 ø d4
L4
control control control function max max max
ø d1 ø d2
L1 L2 L3 L5 L6 L7 U W
Qmax [l/min]
∆p = 6 bar
Sizes
Recess dimensions [mm]
SC LI - 25 31 2 ** /*
+0,1
0
+0,1
0
+0,1
0
+0,1
0
+0,1
0
+0,1
0
+0,2
0
+0,1
0
+0,1
0
+0,1
0
+0,1
0
+0,1
0
+0,1
0
+0,2
0