Modular plates with calibrated holes code SET-050268
ISO 4401 size 06
Available only on request
03/13
050268/*
Modular plates with
calibrated holes,
supplied with 4 OR-108
1 MODEL CODE
A, B, P, T = port identification
* = hole dimension, see section
2
Modular plates with calibrated holes on
ports A, B, P, T, for assembling under
NG6 valves.
Up to 23 different calibrated holes are
available from 0,4 mm to 5,0 mm, with
several ports combination according the
application requirements.
Application
To limit the flow to pilot valves or to actua-
tors, instead of using PLUG or other type
of restrictors.
The modular plates are supplied with 4
OR-108.
2
DIMENSIONS AND AVAILABLE HOLES
Code ø hole [mm]
A, B, P, T
/*04 0.4
/*05 0.5
/*06 0.6
/*07 0.7
/*08 0.8
/*09 0.9
/*10 1
/*12 1.25
/*15 1.5
/*17 1.75
/*20 2
/*22 2.25
/*25 2.5
/*27 2.75
/*30 3
/*32 3.25
/*35 3.5
/*37 3.75
/*40 4
/*42 4.25
/*45 4.5
/*47 4.75
/*50 5
ISO 4401: 2005
Mounting surface: ISO 4401-03-02-0-05
SET-050268/A04, B00, T15
A port with 0,4 mm hole
B port without hole
T port with 1,5 mm hole
P port with standard 7 mm hole
EXAMPLE OF MODEL CODE
Note: in the code omit the port identification if the
relevant hole is standard ø 7 mm
TE020
SET-050268 A*, B*, P*, T*
Seals material
- =
NBR
PE = FKM
/*/
Table TE020-0/E
