Valve model DB-5/G DR-5/G DB-10/G DR-10/G DB-15/G DR-15/G
Nominal flow (at Dp = 8 bar) [l/min] 25 35 55 65 85 95
Max pressure [bar] 350
Cracking pressure [bar] 0,3
www.atos.com
Cartridge check valves type DB, DR
screw-in mounting - from G1/4” to G1/2”
Table C400-5/E
DB, DR are direct operated check valves
for screw-in mounting in cavities from
G1/4” to G1/2”.
They are specifically designed to reduce
the manifold dimensions and simplify the
installation.
Cartridge designed to operate in hydrau-
lic systems with hydraulic mineral oil or
synthetic fluid having similar lubricating
characteristics.
Flow up to 95 l/min.
Max pressure: 350 bar
Screw-in check valve
1
C400
Size/threated connections:
5 = G 1/4” 10 = G 3/8” 15 = G 1/2”
B = function A 씮 B
R = function B 씮 A
MODEL CODE
DB-5/G DR-5/G
DB-*/G DR-*/G
2 HYDRAULIC CHARACTERISTICS
Hydraulic symbol
G = Gas threading
3
MAIN CHARACTERISTICS, SEALS AND FLUIDS
- for other fluids not included in below table, consult our technical office
Mineral oils
Hydraulic fluid
NBR, FKM, HNBR
FKM
NBR, HNBR
DIN 51524
ISO 12922
HL, HLP, HLPD, HVLP, HVLPD
HFDU, HFDR
HFC
Suitable seals type
Classification Ref. Standard
Flame resistant without water
Flame resistant with water
NBR seals (standard) = -20°C ÷ +60°C, with HFC hydraulic fluids = -20°C ÷ +50°C
Seals, recommended fluid temperature FKM seals (/PE option) = -20°C ÷ +80°C
HNBR seals (/BT option) = -40°C ÷ +60°C, with HFC hydraulic fluids = -40°C ÷ +50°C
Recommended viscosity 15÷100 mm
2
/s - max allowed range 2,8 ÷ 500 mm
2
/s
Assembly position Any position
Fluid contamination class ISO 4406 class 21/19/16 NAS 1638 class 10, in line filters of 25 mm (b25 _>75 recommended)
D
B- G10
//
Flow direction As shown in the symbol at section
쪨
Rated flow See diagrams Q/Dp at section
쪪
Series number
**
*
Seals material, see section
쪩
:
- =
NBR
PE = FKM
BT = HNBR
Ambient temperature Standard execution = -30°C ÷ +70°C; /PE option = -20°C ÷ +70°C ; /BT option = -40°C ÷ +70°C
DR-5/G
DB-5/G
DR-10/G
DB-10/G
DR-15/G
DB-15/G
A D1 D2 D3 D4 L1 L2 L3 L4 L5 L6 L7
G 1/4” 8 6 22 11,6 22 19 14 11 8 1,5 3
G 3/8” 9 8 26 15 24 21 17 14 9 1,5 3
G 1/2” 12 12 30 18,75 28 24,5 22 18,5 10 1,5 3,5
DB-5/G
DR-5/G
DB-10/G
DR-10/G
DB-15/G
DR-15/G
04/15
4
F
LOW VERSUS PRESSURE DROP DIAGRAMS based on mineral oil ISO VG 46 at 50°C
6 VALVE DIMENSIONS [mm]
5
R
ECESS DIMENSIONS [mm]
F
low [l/min]
Valve pressure drop [bar]
F
low [l/min]
Valve pressure drop [bar]
F
low [l/min]
Valve pressure drop [bar]
DB-5/G, DR-5/G
*-DRG-205000
DB-10/G, DR-10/G DB-15/G, DR-15/G
Note: this special key is required for
assembling the valve in the cavity
A B C E M
햲 Mass (Kg)
DB-5/G 2,1 10,3
OR-9x1/70
DR-5/G 2,4 9
DB-10/G 2,8 2 11,3
OR-11x1,5/70
DR-10/G 3,3 2,5 11,4
DB-15/G 3,2 2,5 12,9
OR-14x1,5/70
DR-15/G 4 2,5 13,6
11,5
15
18,5
0,060
0,012
0,020
1,5
G 1/4”
G 3/8”
G 1/2”
DB-5/G CH 7
DR-5/G 5-DRG-205000
DB-10/G CH 6
DR-10/G
10-DRG-205000
DB-15/G CH 8
DR-15/G
15-DRG-205000
A KEY
Tightening
torque (Nm)
G 1/4”
G 3/8”
G 1/2”
15
20
40
DB
DR
햲
